spindle used for sale

Lead and pull spindle lathe VEB DLZ 280 Center width: 900 mm Tip height over support: 90 mm Tip height above bed: 140 mm incl. accessories as shown ! Dimensions: 2,200 x 1,200 x 1800 mm Video: youtu.be/CeVz3o2XVus Auction-ID: A7-49701-12

Sr. No.: 71809

Aigner guides. Feeder.round router protection. Auction-ID: A1-49727-1

Panhans swivel spindle milling machine with 4-roller feed Type: 231 Series: 2000 Year of manufacture: 2000 CE Table size L 1100 mm x W 760 mm Table height 870 mm Motor power 5.5 kW Speeds 3000/4500/6000/9000 rpm. Height adjustment of the milling mandrel 120 mm Milling mandrel diameter 30 mm Swivel range -5° to +45° Height adjustment and swivel by handwheel Suction nozzle diameter 2 x 120 mm 400 V/N/PE / 50 Hz / 3 pH Current type AC Full load current 22 A with 4-roller feed with some tools complete with operating instructions Machine is in very good condition, as very little used, max. 100 operating hours Net weight 630 mm

Professional Industrial Machine Digital display 3-jaw chuck 200 mm. 4-jaw chuck Face Plate Fixed bezel Steady bezel Multifix steel holder. Machine Light Foot brake Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine feet Machine Tool Turning diameter over bed 400 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in the offset 570 mm Speed 45 - 1800 rpm Tip height 210 mm Spindle bore 52 mm Tailstock quill holder MK 4 Connection voltage 400 V Total power requirement 3.5 kW Machine weight approx. 1.5 t Dimensions approx. 2.6 x 1.1 x 1.7 m Auction-ID: A7-49782-424

Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-49782-403

Technical data Manufacturer: Colchester Model: Mascot 1600 Machine Type: Lead and Pull Spindle Lathe Lead screw pitch: 6 mm Multi-stage speed selection, labeling visible up to 1,600 rpm Configuration 3-jaw chuck Fixed bezel Tailstock Tool Holder / Multiple Steel Holder Thread and feed tables on the machine Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-186

Lead and pull spindle lathe VEB DLZ 450 / 2000 Center width: 2,000 mm Tip height above bed: 250 mm Tip height above support: 150 mm Speed: 16 - 2240 rpm (18 steps) Spindle bore: Ø 45 mm 380V 3AC 50Hz 21A 10.3kW Dimensions: 3,600 x 1,000 x 1,400 mm Auction-ID: A7-49701-10

General Description Horizontal spindle surface grinding machine, model FG251 , designed for precision grinding of flat surfaces on tool steel, hardened components and precision mechanical parts. The machine is equipped with a hydraulic reciprocating table and automatic table reversing for efficient surface grinding operations. Technical Details Model: FG251 Machine type: Horizontal spindle surface grinding machine Horizontal grinding spindle Vertical wheel-head feed Hydraulic longitudinal table movement Manual cross feed Automatic table reversing Speed/feed selector panel Lubrication system with original lubrication diagram Integrated hydraulic and electrical cabinet in the rear column Approximate table travel: 700–900 mm Approximate table width: 200–250 mm Condition Used industrial condition. The machine appears complete with grinding spindle, hydraulic table dr ...

Guide and tension spindle lathe machine - Forkardt-3 jaw chuck F 315 - Single steel holder - Bezel - Moving center punch - Feed protection, Limit switch monitored - Chip tray Turning diameter over bed 600 mm Turning diameter over support 400 mm Turning length 1000 mm Turning diameter in the offset 850 mm Speed 15 - 810 rpm Center height 300 mm Spindle bore 56 mm Total power requirement 9.0 KW Machine weight approx. 2.9 t Dimensions approx. 2.8 x 1.45 x 1.65 m Auction-ID: A7-49782-417

STUDER internal grinding spindle – 40,000 rpm with accessories High-speed spindle for internal grinding STUDER is for sale, in excellent condition and properly stored in its original wooden protection box. Key features: - Type: 102540B - Maximum speed: 40,000 rpm - Compatibility: Studer S30, S40, S31, Favorit, etc. - Application: Internal grinding - High-precision construction. - Includes wheel holders/accessories and tools shown in the photographs. - Includes documentation and instructions. - Wooden box for storage and transport. Ideal as a replacement for STUDER grinding machines, for replacing an existing spindle or for repair projects. The set is delivered with the available accessories shown in the photographs, offering a particularly interesting solution for grinding workshops that need hard-to-find STUDER original equipment. National and inter ...

Technical data Manufacturer: EMCO Model: Maximat Super 11 Speeds: 55 / 110 / 200 / 300 / 410 / 600 / 1100 / 2200 rpm 8 speed levels Digital display: ELESTA VISULESTA II E Hardened machine bed Configuration 3-jaw chuck available Additional 3-jaw chuck Collet holder with collet set Quick-change steel holder Tailstock available Accessories with tool holders and tips Machine in used condition Auction-ID: A7-49302-3061

Technical data Manufacturer: WEILER Model: Matador, according to the marking Design: conventional lead and tension spindle lathe Turning length: approx. 500 mm Turning height: approx. 160 mm Spindle passage: approx. 40 mm Dimensions: approx. 1,500 × 500 × 1,300 mm (L × W × H) Weight: approx. 600 kg Configuration Three-jaw chuck, tailstock, tool holder and integrated machine base with storage space. With visible accessories, including collets, interchangeable wheels, chuck jaws and other lathe accessories. Auction-ID: A7-49302-98

General Description Twin-opposed spindle CNC turning center manufactured by Shanghai SIO Electromechanical Technology Co., Ltd. , model FC-500 . Designed for high-productivity machining of shafts and similar components by enabling simultaneous or sequential machining from both ends. The machine is equipped with Siemens CNC control, hydraulic workholding and automatic chip removal. Technical Details Manufacturer: Shanghai SIO Electromechanical Technology Co., Ltd. Model: FC-500 Machine type: CNC twin-spindle turning center Year: 2019 Serial number: 20191011 Power supply: 400 V, 50 Hz Connected load: 25 kVA Twin opposed spindle configuration Siemens SINUMERIK CNC control Siemens SINAMICS servo drives INVT frequency inverters Hydraulic workholding system Automatic lubrication Chip conveyor Electronic handwheel (MPG) Precision linear guideways Ball screw driven axes  ...

Technical data Manufacturer: WEILER Model: Matador VS1 Speed range: 30 - 3550 rpm 16 speed levels Electrical connection: 380 V Dimensions approx. 1500 x 700 x 1550 mm Configuration 3-jaw chuck HEIDENHAIN Digital Display Tailstock with drill chuck Quick-change steel holder Collet set in the base cabinet Accessories with tips, jaws and tool holders Protective cover on the chuck Machine in used condition Auction-ID: A7-49302-3058

Technical data Manufacturer: Mazak / Yamazaki Mazak Corp. Type: Super Quick Turn Model No.: 16MS-Y Nameplate: SQT-16 MSY Machine Type: CNC Lathe / CNC Turning Center Chuck Manufacturer: Kitagawa Chuck Model: B-216 Max. pressure chuck: 410 PSI / 29 kgf/cm² Max. speed chuck: 5,000 RPM Configuration With tool turret, chuck, protective grille and visible auxiliary units. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-157

BIGLIA B565 SM (2014) is a two-spindle CNC turning center, equipped with a GE Fanuc Series 32i MODEL B control and an S+M configuration with sub-spindle and rotating tools. Capabilities: Maximum turning diameter: 290 mm Maximum turning length: 560 mm Main spindle bar passage: Ø 65 mm Passage diameter above the bed: 580 mm Main pin: Speed: 30 to 4,000 RPM Spindle Nose: ASA 6\" Spindle Bore: 76 mm Chuck: 210 / 250 mm Engine power: 26 kW / 15 kW C-axis resolution: 0.001° Sub-spindle (S): Speed: 30 to 5,000 rpm Spindle Nose: ASA 5\" Chuck: 165 mm Engine power: 11 kW B-axis stroke: approx. 560 mm Turret and rotating tools (M): 12 positions, all motorizable Index time: 0.15 s Rotating tool speed: 30 to 4,000 rpm (6,000 rpm optional) Rotating tool power: 5.5 kW Tool section: 25 ...

Technical data Manufacturer: WEILER Machine Tools Model No.: Intern 140 Machine No.: 85140112 Operating voltage: 380 V Control voltage: 220 V Connected load: 2.2 kW Tip height: 140 mm (Source: Online research) Circulating Ø over bed: 280 mm (Source: online research) Circulating Ø over face slide: 158 mm (Source: Online research) Center width: 650 mm (Source: Online research) Speed range: 96–2,500 rpm, 8 steps (source: online research) Longitudinal feed: 0.02–0.63 mm/rev (source: online research) Tailstock mount: MK 3 (Source: Online research) Quill stroke: 85 mm (Source: Online research) Weight: approx. 660 kg (Source: Online research) Configuration HEIDENHAIN digital display, 3-jaw chuck, Multifix tool holder, tailstock, coolant device and machine base with storage space. Note No technical documentation available. information researched to the best of my ...

Voumard, 20448 - C28-9D, Fortuna Internal grinding spindle, up to 28000rpm, outer diameter 90mm, length approx. 350mm Picture below left ! Other spindles on request !

General Description Industrial AC spindle motor manufactured by Mitsubishi Electric Corporation , model SE-EF-FV . Three-phase induction motor designed for spindle drive applications on industrial machine tools and intended for operation with a compatible Mitsubishi drive/controller. Technical Details Manufacturer: Mitsubishi Electric Corporation Model: SE-EF-FV Machine type: AC spindle motor Serial number: 2500E4009 Motor power: 15 kW Motor type: 3-phase AC induction motor Number of poles: 4 Voltage: 150 V Rated current: 89 A Rated speed: 1,500 rpm Duty rating: Continuous Frame size: 160L Insulation class: F Maximum ambient temperature: 40°C Thermal protector fitted Cooling blower: 1A-15040 Blower supply: 200/220 V, 50/60 Hz Blower current: 0.42 A Bearing markings: 7203 / 2203 Controller designation: Mitsubishi FR-SX Manufactured in Japan Condition Used in ...

Grinding spindle incl. grinding wheel, 2 holders, belt wheels, electric motor, wheel cover, balancing mandrel, and description. Fortuna, 14 UA 85, Outer Ø : Ø 85 mm Length : approx. 400mm Other grinding spindles on request. See photos !

Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmGeneral2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Work spindle (right)Spindle diametre on front bearing90 mmSpindle bore45 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Shank diametre according to DI ...

Machine number: 8436 Spindle passage: approx. 63 mm Center length: approx. 1000 mm Center height above bed: approx. 250 mm Turning diameter over bed: approx. 500 mm Center height over support: approx. 150 mm Turning diameter over support: approx. 300 mm The machine is equipped with a tailstock, a lathe steel holder and a three-jaw chuck TOS, diameter: 250 mm Spindle speed: from 22 to 1000 rpm Reference: Zafa - Lot 3 Auction-ID: A7-49882-96

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...

twin-spindle chucking lathe, year 2006, CNC 21iTA × 2. Used machine in good condition. More info & price on IndustrialBuyer.

Lead and pull spindle lathe - 3-jaw chuck 160mm - Face plate - Replacement jaws - Quick-change steel bracket base body - 3 pcs steel holders - 2 pcs bezels - Moving center punch - Chip tray Turning diameter over bed 320 mm Turning diameter over support 180 mm Turning length 1000 mm Turning diameter in the offset 460 mm Speed 70 -2000 rpm Tip height 160 mm Spindle bore 27 mm Total power requirement 2.0 KW Machine weight approx. 0.7 t Space requirement approx. 1.8 x 1.2 x 1.6 m Auction-ID: A7-49782-433

Incl. accessories, consisting of: a.o. Extensive collection of clamping devices 1 storage rack with contents, dimensions (LxWxH) approx: 1350x880x1100 mm Approx. 11 tool holders (quick couplers) 1 cabinet with contents, dimensions (LxWxH) approx: 920x460x1080 mm Auction-ID: A1-49926-6

Conventional lead and tension spindle lathe from the German manufacturer Heidenreich & Harbeck (VDF), Hamburg, classic toolmaker lathe with hardened bed and mechanical feed and thread cutting gear. The machine is equipped with a Multifix quick-change holder (type B) and has a wide range of accessories including tool cabinet and turning holder package. Electrics: Operating voltage: 380 V Control current: 220 V Frequency: 50 Hz Total current: approx. 4 A Equipment: Multifix quick-change holder type B several rotary holders and drill holders Forkardt 3-jaw chuck Ø200 mm Tooling tool cabinet classic VDF feed and threaded gearbox Auction-ID: A7-49942-600

twin-spindle chucking lathe, year 2002, CNC 21 TB. Used machine in good condition. More info & price on IndustrialBuyer.

twin-spindle chucking lathe, year 1999, CNC 18-T. Used machine in good condition. More info & price on IndustrialBuyer.

Power Consumption: 1.5kW-7.5A Machine Type: Paper Drilling Machine Drill heads: 4, individually adjustable Max. stack height: 65 mm Drill diameter: 3–13 mm Power supply: 230 V / 1-phase Auction-ID: A1-49964-24

twin-spindle CNC lathe, year 2008, CNC 180i-TB. Used machine in good condition. More info & price on IndustrialBuyer.

twin-spindle chucking lathe, year 2000, CNC 18i-TB. Used machine in good condition. More info & price on IndustrialBuyer.

Equipped with emergency stop button, bottom and top extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, A protected control cabinet for automatic control of the power supply, Thermal motor protection and door lock switch. Steff type 2033 feeder, Motor 380 volt, 0.75 Kw three rubber feed rollers D = 100 mm w = 50 mm. 8 supply speeds adjustable. Auction-ID: A1-48994-49

Professional Industrial Machine (400Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Face Plate 280mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-571

Equipped with emergency stop button, bottom and top blade extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, with motor brake, with thermal motor protection. Auction-ID: A1-48994-24

Equipped with emergency stop button, bottom and top blade extraction 80 - 100 mm, milling guide with mutual left and right fine adjustment of the guides, with motor brake, with thermal motor protection. Holzher feeder, Motor 380 volt, 0.7 Kw Three rubber feed rollers 120 mm x 60 mm 8 different speeds. Auction-ID: A1-48994-27

Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm Auction-ID: A7-49782-438

Equipped with emergency stop button, bottom and top top extraction 80 mm, milling guide with left and right fine adjustment of the guides, milling spindle speed 3800 – 5400 – 7200 – 9000 rpm. With thermal motor protection. Auction-ID: A1-48994-9

Technical data Manufacturer: KUKA Type: KR 125/1 Product no.: 0001490176 Serial Number: 721142 Date of manufacture: 1996-09 Weight: 975 kg Axles: 6 Nominal payload: 125 kg Repeatability: 0.2 mm (Source: Online Research) Working radius: 2,400 mm (Source: Online Research) Degree of protection: IP64 (Source: Online research) Working space volume: approx. 39 m³ (source: online research) Configuration Control: KUKA KR C2 MP5 Control panel: KUKA KCP2 Software: KUKA System Software (KSS) Release 5.2 Machining spindle: HSD, liquid-cooled, 380 V, 400 Hz, 12,000 min⁻¹, S1 6.5 kW, 15 A, IP64, 4-pole, 29 kg Accessories: Tool/clamping holders, connection and supply components as well as KUKA documentation and data carriers. Note Some of the technical information has been supplemented on the basis of verified online sources and marked accordingly in each  ...

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left with table top extension of 500 mm per side. The total tabletop width is then 1530 mm. With automatic star triangle start switch and with motor brake. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. Both with thermal motor protection. With manual pin for spindle locking. This cutter is fully equipped for milling round work and has an extra Aigner milling cap. Equipped with a SUF pressure protection standard with different pressure rings and guides. Steff feeder type 38,  ...

Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-498

Turning diameter over bed: 400 mm, over face slide 246 mm Lead screw diameter: 32 mm Drive: Electric motor main motor: 7.7 kW. Auction-ID: A7-49604-10

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left and right with table top extension of 500 mm per side. The total table top width is then 2030 mm. With automatic star triangle start switch and with motor brake. At the front a pull-out support guide, which is 540 mm extendable. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. pneumatic spindle lock. Thermal motor protection and an adjustable bump bar for plunge work and can be set up left and right. Equipped with Univer supply device, type 508, 380 volt and Motor 0.75 Kw equi ...

Equipped with manual spindle lock, Top blade extraction 120 mm. Auction-ID: A1-48994-13

Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-442

With emergency stop button and door lock switch. Milling spindle 40 mm, speed 3000-4500-7500-9000 with led indication. Left with table top extension of 500 mm, right with a narrower table extension of 670 mm. The total table top width is then 2200 mm With automatic star triangle start switch and with motor brake. Handwheel for height adjustment is rotated with a rotation, the milling spindle 1 mm up. The milling plate guide can be adjusted numerically at two points independently left and right. The milling plate guide can also be adjusted numerically readable forwards and backwards The machine has top and bottom top extraction of 120 mm. pneumatic spindle lock. Thermal motor protection and an adjustable bump bar for plunge work and can be set up left and right. Equipped with Univer supply device type 508, built in 1996, Motor 380 volts 0.75 Kw. three rubber feed rollers D= 10 ...

Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-49782-499

3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-49782-493