We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,973 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
With Hydac pressure sensor + digital readout Capacity: 100 ton Passage between uprights: 700 mm Max stroke: 250 mm Distance between table -- ram: 300 mm (400 mm without tables) Table area: 700 x 700 mm Length: 1420 mm Depth: 880 mm Height: 1730 mm Weight: 1,5 ton
used
Make Splek Hydraulic book pres Model IIB Year 1970 Size 280 x 440 mm Stackheight 600 mm Pressure 3 tons
used
- Upper/closing pressing force: 30 t - Upper/closing retraction force: 15 t - Upper/closing stroke max.: 300 mm - Under/spray piston pressing force: 11 t - Under/spray piston retraction force: 5.2 t - Under/Spray piston stroke max: 150 mm
used
used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2015 Machine no.: 6152.314. Series No.: 460001663 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)
used
used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)
used
used cabinet press Manufacturer: HSM Type: VL 155.2 Year of construction: 2006 Machine No.: 6114.144. Series No.: 270174730 U specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling chamber - 1100 - 700 x 1130 mm Bale size: 1.100x700x950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Capacity: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
used
Conductive force: 63 t Projection: 280 mm Table size: 500 x 600 mm Installation height: without straightening bridge 600 mm stroke: 160 mm Tappet speed upwards: 117 mm/s m/min Rotary speed downwards: 42 mm/s m/min Space requirement: 1600 x 700 x 2400 mm Weight: 3900 kg
used
Type: 74.40 CNC folding beam adjustment: 80 mm CNC pivot joint adjustment: 80 mm Max worklength: 4060 mm Max tickness: 3 mm Distance between clampblock -- ram: 400 mm Max displacement back gauge: 1550 mm
used
I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.
used
EXNER EXSBR 200 hydraulic press YOM 8/1987 Serial No. 10042 Pressure 200 t Table 1800 x 800 mm Power requirement 65 kW Safety distance 195 mm Overtravel 52 mm Run-on time 120 ms Weight ca. 23 t
new
: gebraucht / neuwertiger Z : 2019 : 7191 : prompt, Zwischenverkauf v : Italien : 43200 € : 1 : 50 to : 800 mm : 450 mm : 11 - 110 mm : 60 - 100 1/min : 8 : 70 mm : 235 mm : 5,5 kW : 1330 mm : 1000 mm : 2650 mm : 5000 kg with 8-fold ram guide fixed table semi-automatic stroke adjustment motorized ram adjustment Variable speed motor hydraulic overload protection dynamic braking platen automatic circulation lubrication safety light guard Keyence Antivibrationspads PEDAL COVER PLATE FOR HOLE IN THE TABLE user manual in GERMAN or ENGLISH Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms v ...
used
Used briquetting press Manufacturer: Höcker Polytechnik Type: C30-12 Year of construction: 02/2003 specifications: Pressing capacity: up to approx. 30 kg/h (depending on material) Hydraulic motor power: 3.0 kW VBriquette diameter: 65 mm Residual moisture: max. 18 % Operating time (without cooler) max. 6-7 h Operating pressure: max. 180 bar Operating temperature hydraulic oil max. 60°C Working environment +5°C to +35 °C Machine weight: approx. 760 kg Container capacity: approx. 0.8 m³ Gearbox agitator: 0.37 kW Space requirement: 1,350 x 1,510 x 1,300 mm (L x W x H) -without pedestal Platform dimensions: 2,350 x 2,550 mm
used
MACHINE IS GREAT WORKING CONDITION . INCLUDING TOOLINGS WEIGHT: 4300 KG YEAR: 1991
used
Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO
used
As good as new mobile car press type Orca 4800 P with radio remote control and parcel ejection door. Very good condition. Only 871 operating hours. Length press box 4800 mm, width 1850 mm, pressing pressure 2 x 160 to and 150 to ready-to-print parcel. Mobile on Roll-off frame. Powered by diesel engine.
new
Hydraulic tire separator press type SEDA T-REC XXL. For quick separation of tire and rim. Also ideal for alloy rims.
used
Specifications Maximum pressure: 60 tons Power supply: 380V/7.5kW Pressing force: 6.81 kg/cm² Year of construction: 2011-2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request
used
Key data: 200 , 60
Minster HB2 Punching Press equipped with sound cabin, Kohler decoiler, load/unload crane and service crane. Price and other information about the machine available on request. For those interested, I will send a link to more pictures. Specification: Punching press Manufacturer – Minster USA model – HB2 (Hummingbird) serial no – 25007 die table dimensions – 914.4mm x 635mm year of manuf. - 1981 pressure 60 t type - Flywheel stroke of slide - 25.4 mm no. of strokes - 200 - 1600 /min shut height – bolster – 366.6 mm; bed – 443 mm power requirement - 50,0 kW dimensions of the press ca. 2,7 x 1,7 x 3,6 m Decoiler Manufacturer – Kohler type – 18260-1500.2 year of manuf. - 1981 material width 260mm coil weight - 2 x 1,65t material thickness - 0,4 - 3,0mm coil internal diameter - 460 - 530mm coil external diameter - max 1350mm no. of straightenin ...
used
Pneumatic material clamps Hydraulic operation of the punching heads Profile height max. 120 mm Press-fit height max. 80 mm Punching stroke max. 30 mm Press force adjustable up to 100 kN Motor power: 1.5 kW Weight approx. 400 kg
new
Machine type: Workshop press Manufacturer: RHTC Model: 50 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 50 t Working width: 750 mm Table: 750 x 336 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 340 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
new
Machine type: Workshop press Manufacturer: RHTC Model: 30 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 30 t Working width: 565 mm Table: 565 x 255 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 165 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
new
Machine type: Workshop press Manufacturer: RHTC Model: 15 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 15 t Working width: 560 mm Table: 560 x 214 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 117 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
used
Specifications Maximum pressure: 60 tons Power supply: 400V / 7.5 kW Pressing force: 4.54 kg/cm² Year of construction: 2002 Bale size: 1200x1100x1100-1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 600 kg Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Specifications Maximum pressure: 60 tons Power supply: 380V/ 11 kW Pressing force: 6.81 kg/cm² Year of construction: 2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
new
Machine type: Workshop press Manufacturer: RHTC Model: 30 TON M-V Condition: new Offer type: new machine Specifications: Version: el.hydr. / fixed cylinder Compressive force: 30 t Working width: 750 mm Table: 750 x 260 mm Piston stroke: 350 mm Drive: 1.5 kW Weight: 385 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
used
gebr. Veneer press GEWEMA / Hiller P65S YOC 1980 Plate size: 250 x 110 cm Opening width: 35 cm Opening width limitation variably adjustable. Connected load: 15.1 kW (8.1 kW with economy circuit) Power per heating plate: 7 kW Press force: 65t Max. operating pressure: 350 bar Circumferential safety ripcord incl. new digital clock Dimensions (approx. Dimensions): L: 288 cm W: 128 cm H: 168 cm Weight: 2.9t All 4 hydraulic cylinders have been resealed (new seal set). The heating plates show signs of wear and tear that are customary for their age. In 2 places of the upper heating plate, smaller pressure points / dents are noticeable by hand (but not immediately visible).
used
(2) Asahi Sunac THP500-6 horizontal forging press (heading machine) Year: 2008 First stroke: 24 mm Second stroke: 50 mm Kickout power: 150 kN Open height: 625 mm Closed height: 425 mm Die (WxL): 500x490 mm Punch (WxL): 250x350 mm Ram stroke: 200 mm Forging force: 5000 kN Cycling time: 6.5 sec Crank speed: 60 RPM Machine weight: 28 t
used
Hot forging press Kurimoto C2F-16 Year: 2002 Capacity: 1600 ton Stroke: 200 mm Stroke per minute: 60 Die height: 707 mm Bolster area: 1265x890 mm Adapter area: 930x1065 mm Main motor: 75kW, 480V
used
SPECIFICATIONS: Hydraulic hot press Dimensions of the work table mm: 3,000 x 1,300 Mounted serpentine table Maximum temperature: 120°. Number of pistons: 6 diameter Ø 65 mm Installed capacity KW: 30,5 Complete with intermediate plate Diathermal oil operation Complete with electric oil boiler
used
Dough dividing and warping machine Fortuna Bread roll press TTW Fortuna Automat Gr. 4 E with active cabling circuit Head cleaning with electric motor Partial header newly revised 30-piece with stainless steel knife NEW Dough insert 1200 to 3600 g, Unit weight from 40 to 120 g E-system NEW DGUV V3 tested with return button Connection 400V, 16A-CEE plug Size ca.: 710 x 730 x 1500 mm WxDxH Used machine overhauled with 6 months warranty large selection of Fortuna vending machines
used
Dough dividing and warping machine Bread roll press Fortuna Automat Gr. 3+ in large selection in stock! with active cabling circuit Head cleaning to the rear electric Partial head with stainless steel measuring device NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with return button DGUV V3 tested Protective visor Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis
used
Dough divider bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear Partial header newly revised with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates with return button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty only on spare parts Option: Platform or chassis
new
Semi-automatic dough dividing and warping machine Bread roll press Model: 4/30 sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates replaceable partial disc / part head manual sharing mechanical rounding Dough ring coated with easy klick Subrange 40 to 120 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty
new
Dough dividing and warping machine, Bread roll press Semi-automatic Model: 4-14 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated with easy klick Subrange 130 to 250 grams/piece Division 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty
new
Bread roll press Semi-automatic Dough dividing and warping machine Model: 3-30 NEW sophisticated technology ... the original! Knives with easy cleaning position! with 3 active plates Dough ring coated with easy klick Subrange 30 to 100 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty
used
Dough dividing and warping machine Bread roll press Fortuna Gr. 3 Semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty
used
Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h
used
Bread roll press Fortuna Gr. 3 Semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty
used
Bread roll press size 3 Fortuna semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty
used
Eccentric press Manufacturer KRS (Kurt Rompel Solingen) Type EPV50, YOC 66, Printing capacity 50 t, Plunger stroke 80 mm, Weight approx. 2.500kg UVV Test Book Machine fully operational
used
SPECIFICATIONS: Hydraulic frame press for doors and windows Working width mm: 3000 Working height mm: 1800 Control panel Hydraulic unit KW: 2.2
used
Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm
used
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9905 Year of Make: 2016 Hours: 1849 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9904 Year of Make: 2016 Hours: 1349 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
technical details: - Number of goats: 6 pieces - Number of press beams: 6 pieces - Number of clamping wrenches: 4 pieces - Number of screeds (2,500 mm): 8 pieces - Number of wooden inserts: 6 pieces (1 x divided) Metrics: - Trestle height: 1,000 mm - Trestle width: 1,450 mm (1,410 mm) - Clamping height: 360 mm, minus the screed thickness of 140 mm = 220 mm! - Clamping area: 2,500 x 1,120 mm - Length of the screeds: 2,500 mm (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
used
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9903 Year of Make: 2016 Hours: 1695 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9902 Year of Make: 2016 Hours: 2548 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9901 Year of Make: 2016 Hours: 1713 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
Vertical baler HSM V-Press 1160 plus, built in 2016 Specifications: Manufacturer: HSM Type: V-Press 1160 plus Stock No.: 9900 Year of Make: 2016 Hours: 1501 Press force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
For sale second hand briquett press mde from CF Nielsen, model BP 6500, cy 2008, well condition. Price: 95.000 EUR