spindle presses used for sale

Vertical baler Dixi 60 SH, built in 2009 Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SH Drive power: 7.5 kW Press force: 60 t Cycle time: 36 s Pressing time: 16 s Filling opening: 1160 x 550 mm Filling height: 1180 mm Bale size: 1200 x 800 x 1100 mm Bale weight: 340-500 kg Setting: manual Dimensions: 1890 x 1400 x 2170 mm Weight: 2430 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Capacity: 1 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm MACH-id    5166 MAKE        Eckold TYPE          HA 510 _+ MVZ 11 YOP            1996 DIMENSIONS Length     800 mm Width       500 mm Height      1200 mm

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

ZM 125 ton Capacity: 125 ton Length: 2350 mm Depth : 1300 mm Height: 2700 mm

Capacity: 0 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Day light: 0 mm MAKE   Eckold TYPE     KF 460 YEAR     90 er DIMENSIONS Length   1700 mm Width       950 mm Height    2050 mm

Capacity: 0 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Day light: 0 mm MAKE  Walter Eckold TYPE    KF 665 GIGANT YEAR    90 er DIMENSIONS Length    1950 mm Width      860 mm Height    2050 mm Eckold kf 665 and Eckold KF 460 for sale

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Kraftformer  

Capacity: 0 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Day light: 0 mm MAKE    Eckold TYPE      KF 665 GIGANT YEAR     1989 DIMENSIONS Length    2200 mm Width      900 mm Height    2000 mm Eckold Kraftformer KF 665, we have also some more Eckold machines for sale like Eckold piccolo, Eckold kf 330 , Eckold kf 314, Eckold kf 460 and many more.

Capacity: 0 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Day light: 0 mm MAKE  Walter Eckold TYPE    KF 330 YEAR   2007 Eckold Kraftformer KF 330 machine for sale, we have also some other eckold machines for sale

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm MACH-id    3751 MAKE    Walter Eckold TYPE      KF 665 GIGANT YEAR     90 er DIMENSIONS Length    2400 mm Width      1000 mm Height      2200 mm Stoke´s 150 - 300 - 600 Adjustable ram 0 - 80 mm Forming capaity steel 6 mm  Forming capacity alu 8 mm

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 309 Picolo Kraftformer    

Capacity: 0 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Day light: 0 mm Eckold KF 309 2.5 mm Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 170 PD Pneumatic 2 Kraftformer  

Capacity: 0 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Day light: 0 mm Eckold KF 170 PD Pneumatic Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Day light: 0 mm Eckold KF 170 PD Pneumatic 2.5 mm

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 460 Kraftformer  

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 330 Kraftformer

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 665 Gigant Kraftformer 

Capacity: 250 t Stroke: 10 mm Distance column/center (Throat): 360 mm Table length: 900 mm Table width: 630 mm MAKE   WMW Zeulenroda TYPE     PYE 250 N YEAR    80 er SPECIFICATIONS Hydraulic / Mechanical HydraulicPress force   250 Ton Table Length x Width  900 x 630 mm Throat360 mm Die height   1000 mm Stroke Length   500 mm Power  11 kW DIMENSIONS Length    1250 mm Width     2000 mm Height   3800 mm  

Capacity: 220 t Table length: 4300 mm Table width: 2000 mm Stroke: 0 mm MACH-id  3415 MAKE   Comessa TYPE   PR 220 YEAR    1975 SPECIFICATIONS   Hydraulic / Mechanical Hydraulic   Press force   220 Ton Table Length x Width   4.300 x 2.000 mm Die height  1.000 mm Power5.5 kW Comessa Portal straightening  

Capacity: 30 t Bed length: 980 mm Bed width: 850 mm Stroke: 600 mm Day light: 920 mm SPECIFICATIONS Hydraulic / Mechanical   Hydraulic Press force   30 Ton Table Length x Width   980 x 850 mm Throat  920 mm Die height  920 mm Stroke Length  600 mm  

Machine Type: Eccentric Press Manufacturer: AMBOLD Model No.: EVSP 35 Year of construction: 1970 Condition: very good Offer Type: Used Machine Specifications: Compressive force: 35 t Projection: 225 mm Stroke: Stroke adjustment 5 – 80 mm Table: 580 x 440 mm Installation height: 385 mm Propulsion: 3.0 kW Remark: with protective shield control, make black, 50 mm ram adjustment, 130 ram strokes per minute, additional punching plate 565 x 440 x 70 mm, pneumatically adjustable punching table, Two-handed and foot release, 4 machine feet Weight: 2500 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

This hydraulic baler is specially designed for the production of bales, which have the optimal dimensions, adapted to normal maritime containers. The vertical press with 1 box has a capacity of 2 to 4 bales/hour from 300 to 450 kg depending on material. Attach packaging material As soon as the previous bale is removed from the baler, the operator places a new bale. Packaging material on the lower press plate. The operator brings the press into the Starting position, ready to fill. Filling and pressing cycle The filling of the box is done manually via 2 filling doors. When the press box is full the doors are closed and the press starts the cycle. The Press Plate comes down and compacts the material under the barbs. Next, the press plate rises back up allowing the operator to refill the press can. The number of cycles per bale depends on the quantity and density of the bale.  ...

Capacity: 17 t Opening maximum: 150 mm Workpiece height maximum: 100 mm Make Amada FIMAU 17 Type FIMAU 17 Year 1996 Never used Horizontal bending machine Outside diameter max. (mm)Table L = 640 Inside diameter max. (mm) Table W = 540 Max. pipe length (mm)Stroke = 150 Max. angle Force = 17 T Wall Thickness (mm)Speed 17 mm/S Die Height = 100 Manuel stop Never used !

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

HL 450 ton 4 column press

HL 450 ton 4 column press

HL 1000 ton 4 column press

HL 1000 ton 4 column press

Capacity: 80 t Stroke: 250 mm Diameter ram: 0 mm Bed length: 0 mm Bed width: 1040 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm) X = 600 Cross Y (mm)Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5 Swivable head 90 Gr. Feeds all directions  

fully automatic baler Manufacturer: BAUER Type: 500 Year of construction: 1993 specifications: Press force: 50 t Specific pressing force: 6.68 kg/cm² Channel format: 680 x 1,100 mm Bale weight: 450 - 550 kg, depending on material and bale length Filling opening: 1,600 x 1,020 mm Filling volume: 1.66 m³ Drive power: 2 x 22 kW Throughput: - Idle approx. 450 m³/h - under operating conditions approx. 200 m³/h Press services at: - 20 to 30 kg/m³ bulk density approx. 4 to 6 t/h - 35 to 50 kg/m³ bulk density approx. 7 to 10 t/h - 60 kg/m³ bulk density approx. 12 t/h - 100 kg/m³ bulk density approx. 18 t/h Machine weight: approx. 21 t Optionally with chain conveyor belt according to pictures. Subject to accuracy of technical data.

Key data: 100 t

Technical data PDM100R-5393 Power [tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 DIMENSIONS OF THE UPPER PLATE [mm] 850x550 GUIDE COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. APERTURE [mm] 600 STROKE [mm] 420 FREEWHEEL SPEED [mm/s] 50-230 WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER – PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce energy consumption by up to 80% at a standstill, tool change and between the cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD photoelectric sensor technology - LCD display 12" - Configurable working parameters on PLC. - 50 pre-saved programs available on PLC. - Pre-filled valves for fast speeds - Maintenance-free bronze graphite bushings. - Simpl ...

Capacity: 250 t Distance between uprights: 4500 mm Stroke: 0 mm Day light: 0 mm Make Bakker 250 Ton Type YARD 250 Year 70 er Force = 250.000 Kn Outside diameter max. (mm)Column = 4.500 Inside diameter max. (mm)Height = 2.480 Max. pipe length (mm)U ram = 1.770 Max. angle Ram = 285 Wall Thickness (mm)Large set tools  

automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures

automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.

Capacity: 1 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Make Lucas VBU 4 Type VBU 400 trimming & bearding Year 12 . 2001 Siemens SIMATIC Max. swing = 500 mm Thickness = 5 mm Stroke cylinder = 350 mm 2 x Support ZHSA 2 x Sick safety guids  

Fully European, professional workshop electric press with a pressure of 100t. Made of the highest quality steel, it ensures maximum precision of work during manual or automatic operation. The press has two speeds of operation - the piston at idle (without load) descends very quickly to the workpiece - while when a load is detected, the pump automatically switches to the working mode - slower and precise. Equipped with an adjustable work table and an electric pump. Precision is ensured by a robust hydraulic system and perfectly balanced, robust components. Viber-System workshop electric presses are a must-have in every professional workshop that appreciates precise and fast work. Model Specification WP100HPRK: Model: WP100HPRK Press force: 100 tons Max. pressure 320 bar Piston stroke: 400mm Oil tank capacity: 27l No-load speed (idle): 16mm/sec Piston return speed: ...

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, mal ...

Veneer Press Gluing Press Plate Press Heat Press OTT Type: JU 65 YOC 1977 Press dimensions : 120 x 225 cm incl. heating plates The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance for more detailed cond ...

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

FETTE TABLET PRESS, MODEL P3100 Year of construction: 1992 55 station rotary double sided tablet press. Designed for high volume production of a wide range of tablets with an output of up to 594,000 tablets per hour. Machine size: 1650mm x 1600mm x 2900mm height (with vacuum units fitted, or 2000mm high without them) Approx. weight: 3,750kg Key information: - Punch/Die type EU-BB - Maximum fill depth: 18mm - Upper punch entry: 2mm – 6mm - Maximum tablet diameter: 13mm - Maximum tablet thickness: 8.5mm - Initial compression force: 20kN (2 ton) - Maximum compact force: 100 kN (10 ton) - Die plate speed: 15-90 rpm - Fitted with 20kN (2 ton) pre-compression station - Upper punch body lubrication and keyed upper punch bores - Variable frequency drive - Two Stainless Steel PIAB vacuum conveyors mounted on the top of the machine for delivering bulk product - Emer ...

Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. El schematics included. Packing and loading included. Feeding device not included, if needed contact for more information.

Key data: 50 t, 2000 mm

Machine Type: Press Brake Manufacturer: Promecam Type: 50x2 Condition: used / functional Offer will only be sent if a complete imprint is provided! Price 5.650 Euro incl. 19% VAT ex stock Warstein Location Warstein , Germany Reference M-PRO-0923 DESCRIPTION We offer you a used press brake from the manufacturer Promecam. Specifications Bending force 50t Bending length 2m Weight approx. 3.2t No tools required Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Code: 0229 Brand: POR Model: A 100N - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard With covered suction filtering battery ASPIR MECC AM B/64 CS - CE Standard Technical data Briquette diameter mm 65 Max briquette length mm 50/300 Output m3/h 1,454 Motor Hp 10 Drum diameter mm 1200 Pump lt 50 Level sensor Inspection door Cooling unit Overall dimensions mm 2115 x 1350 x 1700 h Weight kg 1000 Covered suction filtering battery SPIR MECC AM B/64 CS - CE Standard - with 64 filtering tubes Flow rate m3/h 8500 Power Kw 0,18 Round attach with connecting flange Overall dimensions mm 2100 x 2100 x 2800 h Weight kg 650

Capacity: 16 t Table length: 0 mm Table width: 0 mm Stroke: 70 mm Make EBU 16 T Type H 16 Year 1992 Excentric press with air clutch Force = 160 kN Stroke adjustment 4 - 70 mm Ram adjsutment = 80 mm Stroke%27s 160 /Min Air clutch Moving table Separate electic cabinet