spindle moulder used for sale

Technical data Manufacturer: Colchester Model: Mascot 1600 Machine Type: Lead and Pull Spindle Lathe Lead screw pitch: 6 mm Multi-stage speed selection, labeling visible up to 1,600 rpm Configuration 3-jaw chuck Fixed bezel Tailstock Tool Holder / Multiple Steel Holder Thread and feed tables on the machine Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-186

3-jaw chuck 200mm 4-fold steel holder Turning diameter 350mm Turning diameter via support 210 in offset 500mm Turning length 1000mm Speed 20 - 1400rpm Spindle bore 36mm Motor 2.0 KW Weight 600Kg Dimensions 2.2 x 1.0 x 1.5m Auction-ID: A7-49782-493

Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-498

Lead and pull spindle lathe VEB DLZ 450 / 2000 Center width: 2,000 mm Tip height above bed: 250 mm Tip height above support: 150 mm Speed: 16 - 2240 rpm (18 steps) Spindle bore: Ø 45 mm 380V 3AC 50Hz 21A 10.3kW Dimensions: 3,600 x 1,000 x 1,400 mm Auction-ID: A7-49701-10

Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-442

General Description Twin-opposed spindle CNC turning center manufactured by Shanghai SIO Electromechanical Technology Co., Ltd. , model FC-500 . Designed for high-productivity machining of shafts and similar components by enabling simultaneous or sequential machining from both ends. The machine is equipped with Siemens CNC control, hydraulic workholding and automatic chip removal. Technical Details Manufacturer: Shanghai SIO Electromechanical Technology Co., Ltd. Model: FC-500 Machine type: CNC twin-spindle turning center Year: 2019 Serial number: 20191011 Power supply: 400 V, 50 Hz Connected load: 25 kVA Twin opposed spindle configuration Siemens SINUMERIK CNC control Siemens SINAMICS servo drives INVT frequency inverters Hydraulic workholding system Automatic lubrication Chip conveyor Electronic handwheel (MPG) Precision linear guideways Ball screw driven axes  ...

General Description Horizontal spindle surface grinding machine, model FG251 , designed for precision grinding of flat surfaces on tool steel, hardened components and precision mechanical parts. The machine is equipped with a hydraulic reciprocating table and automatic table reversing for efficient surface grinding operations. Technical Details Model: FG251 Machine type: Horizontal spindle surface grinding machine Horizontal grinding spindle Vertical wheel-head feed Hydraulic longitudinal table movement Manual cross feed Automatic table reversing Speed/feed selector panel Lubrication system with original lubrication diagram Integrated hydraulic and electrical cabinet in the rear column Approximate table travel: 700–900 mm Approximate table width: 200–250 mm Condition Used industrial condition. The machine appears complete with grinding spindle, hydraulic table dr ...

Serial number: 0577 Voltage: 400 V Frequency: 50 Hz Tip height: 280 mm Distance between tips: 2000 mm Circulation diameter over bed: 560 mm Circulation diameter over cross slide: 390 mm Rotation diameter in offset: 810 mm Spindle bore: 80 mm Spindle holder: MK 7 Centering tip holder: MK 5 Spindle speed: 20 - 1600 rpm Motor power: 7.5 kW Bed width: 345 mm Bed length: 2650 mm Travel cross slide: 265 mm travel upper slide: 135 mm Travel tailstock: 180 mm Diameter tailstock quill: 75 mm Diameter lead screw: 35 mm Pitch lead screw: 6 mm incl. two-axis digital display, manufacturer EASSON, type: ES-8, as well as three-jaw chuck, diameter: approx. 400 mm with Multifix base holder and tailstock and an additional steady rest and a side cabinet with stock of turning steels, turning steel holders, reducing sleeves and other clamping jaws Reference: Wowi - Lot 40 Auction-ID: A7-49056-188

STUDER internal grinding spindle – 40,000 rpm with accessories High-speed spindle for internal grinding STUDER is for sale, in excellent condition and properly stored in its original wooden protection box. Key features: - Type: 102540B - Maximum speed: 40,000 rpm - Compatibility: Studer S30, S40, S31, Favorit, etc. - Application: Internal grinding - High-precision construction. - Includes wheel holders/accessories and tools shown in the photographs. - Includes documentation and instructions. - Wooden box for storage and transport. Ideal as a replacement for STUDER grinding machines, for replacing an existing spindle or for repair projects. The set is delivered with the available accessories shown in the photographs, offering a particularly interesting solution for grinding workshops that need hard-to-find STUDER original equipment. National and inter ...

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-557

Machine number: 1324 Operating voltage: 380 V Control voltage: 220 V Connection: 3 kW Rated current: 25 A Frequency: 50 Hz Spindle speed: from 22 to 2800 rpm Spindle passage: approx. 42 mm Tip length: approx. 700 mm Centre height above bed: 170 mm Turning diameter over bed: 340 mm Centre height over support: 100 mm Turning diameter over support: 200 mm The machine is equipped with a tailstock, a Multifix turning steel holder, type B, as well as a three-jaw chuck from the manufacturer RÖHM, diameter: 150 mm, as well as a digital display from the manufacturer ELESTA, type: VISULESTA 4 incl. matching workshop drawer cabinet with matching accessories for the machine Reference: Showroom Auction-ID: A7-49056-34

Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m Auction-ID: A7-49782-510

Technical data Manufacturer: EMCO Model: Maximat Super 11 Speeds: 55 / 110 / 200 / 300 / 410 / 600 / 1100 / 2200 rpm 8 speed levels Digital display: ELESTA VISULESTA II E Hardened machine bed Configuration 3-jaw chuck available Additional 3-jaw chuck Collet holder with collet set Quick-change steel holder Tailstock available Accessories with tool holders and tips Machine in used condition Auction-ID: A7-49302-3061

Spindle speed: from 21 to 1500 rpm Spindle passage: approx. 78 mm Center length: approx. 1800 mm Center height above bed: approx. 300 mm Turning diameter over bed: approx. 600 mm Center height over support: approx. 200 mm Turning diameter over support: approx. 400 mm, the machine is equipped with a tailstock, a turning steel holder and a four-jaw chuck from the manufacturer RÖHM, diameter: 350 mm Reference: STS - Lot 9 Auction-ID: A7-49056-250

Serial number: 109640 Power: 8 kW Voltage: 400 V Frequency: 50 Hz incl. digital display ACU-RITE incl. tailstock, Multifix grain holder and three-jaw chuck, diameter: approx. 310 mm Center height: 330 mm Center width: 3000 mm Center height in offset: 435 mm Bridge length: 240 mm Spindle bore: 82 mm Max. torque: 1500 Nm Spinde speed: 9 - 1600 rpm Top slide travel: 145 mm Cross slide travel: 310 mm Tool Dimensions: 25 x 25 mm Tailstock Cone: MK 5 Quill Diameter: 75 mm Quill Travel: 150 mm Reference: Wowi - Lot 67 Auction-ID: A7-49056-192

Technical data Manufacturer: WEILER Model: Matador, according to the marking Design: conventional lead and tension spindle lathe Turning length: approx. 500 mm Turning height: approx. 160 mm Spindle passage: approx. 40 mm Dimensions: approx. 1,500 × 500 × 1,300 mm (L × W × H) Weight: approx. 600 kg Configuration Three-jaw chuck, tailstock, tool holder and integrated machine base with storage space. With visible accessories, including collets, interchangeable wheels, chuck jaws and other lathe accessories. Auction-ID: A7-49302-98

SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-49782-500

Turning diameter over bed: 400 mm, over face slide 246 mm Lead screw diameter: 32 mm Drive: Electric motor main motor: 7.7 kW. Auction-ID: A7-49604-10

Guide and tension spindle lathe machine - Forkardt-3 jaw chuck F 315 - Single steel holder - Bezel - Moving center punch - Feed protection, Limit switch monitored - Chip tray Turning diameter over bed 600 mm Turning diameter over support 400 mm Turning length 1000 mm Turning diameter in the offset 850 mm Speed 15 - 810 rpm Center height 300 mm Spindle bore 56 mm Total power requirement 9.0 KW Machine weight approx. 2.9 t Dimensions approx. 2.8 x 1.45 x 1.65 m Auction-ID: A7-49782-417

Technical data Manufacturer: WEILER Model: Matador VS1 Speed range: 30 - 3550 rpm 16 speed levels Electrical connection: 380 V Dimensions approx. 1500 x 700 x 1550 mm Configuration 3-jaw chuck HEIDENHAIN Digital Display Tailstock with drill chuck Quick-change steel holder Collet set in the base cabinet Accessories with tips, jaws and tool holders Protective cover on the chuck Machine in used condition Auction-ID: A7-49302-3058

Center height: 150 mm Max. turning diameter: 300 mm Max. turning diameter over support: 178 mm Max. turning diameter without bridge: 430 mm Center width: 810 mm Spindle bore: 38 mm Spindle cone: MK 5 Spindle speeds: 60 to 1500 rpm for more data see pictures with plenty of accessories - including two steady rests, inner diameter: max. approx. 70 mm, one face plate, diameter: approx. 250 mm and other accessories Reference: Wup - Lot 13 Auction-ID: A7-49056-68

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake removable chip tray, Chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-49782-514

Technical data Manufacturer: Mazak / Yamazaki Mazak Corp. Type: Super Quick Turn Model No.: 16MS-Y Nameplate: SQT-16 MSY Machine Type: CNC Lathe / CNC Turning Center Chuck Manufacturer: Kitagawa Chuck Model: B-216 Max. pressure chuck: 410 PSI / 29 kgf/cm² Max. speed chuck: 5,000 RPM Configuration With tool turret, chuck, protective grille and visible auxiliary units. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Auction-ID: A7-49302-157

Technical data Manufacturer: WEILER Machine Tools Model No.: Intern 140 Machine No.: 85140112 Operating voltage: 380 V Control voltage: 220 V Connected load: 2.2 kW Tip height: 140 mm (Source: Online research) Circulating Ø over bed: 280 mm (Source: online research) Circulating Ø over face slide: 158 mm (Source: Online research) Center width: 650 mm (Source: Online research) Speed range: 96–2,500 rpm, 8 steps (source: online research) Longitudinal feed: 0.02–0.63 mm/rev (source: online research) Tailstock mount: MK 3 (Source: Online research) Quill stroke: 85 mm (Source: Online research) Weight: approx. 660 kg (Source: Online research) Configuration HEIDENHAIN digital display, 3-jaw chuck, Multifix tool holder, tailstock, coolant device and machine base with storage space. Note No technical documentation available. information researched to the best of my ...

number of spindles:6 spindle passage:22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools!

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2016 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 3 x Y-axis, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot, manufacturer HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Tornos Type: MultiSwiss 8x26 Yob: 2019 full cross slide configuration, counter spindle, part-pre-drawing device, 2 x driven tools, 1 rigid backworking, 1 x driven backworking, 2x 80 bar high pressure pumps optional: setting robot make HandlingTech. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:51 mm Schutte SF51 DNT, yob. 1987, our ID #61868 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF51 DNT Yob: 1987 Six-spindle automatic lathe with 6 main spindles max. nominal diameter D=51mm electronic cam control Balluff gripper in position 6 for backworking, sorting chute independent longitudinal feed layer 5 screw chip conveyor Tapping couplings Interface for: Bar feeder IEMCA PRA Bar feeder IEMCA PRA40/33/F Scope of delivery without the blue chip conveyor The tooling will differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

number of spindles:9 spindle passage:46 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SC9-46 Yob: 2016 Six-spindle automatic lathe with 6 main spindles with max. nominal throughput D=46mm and 3 counter spindles Main spindles: 6 motor spindles D46mm, 5. 000 rpm, 35 Nm to 80 Nm Cross slide units, transverse: 6 units, in positions I to VI, Slide units, longitudinal: 5 units, in positions I to V, Slide units, longitudinal: 5 units, in positions I to V, Counter spindles: 3 units, one each in positions VI, VIII and IX, 7. 500 rpm Cross slide units, transverse: 2 units, in positions VIII and IX, Control: Siemens SINUMERIK 840SL with double NCU Software: Schütte SICS, Sinomerik Operate 4.5, Safety Integreted, Spindle coupling package ?CP-Expert?, for up to 8 spindle couplings (maximum expansion) Synchronous action package ?Level? 2, incl. cross-mode actio ...

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SG18 Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF20 S Dnt Yob: 1999 Six-spindle automatic lathe with 6 main spindles max. nominal diameter: D=20mm Spindle drum hirth coupled, CNC cross slide in positions 4, CNC cross slide in positions 5, pick up in position 6, sorting chute, 1x independent feed, thread cutting couplings, workpiece belt, Coolant tank with hinged belt chip conveyor Ruez, Oil/steel operation, PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611, The scope of delivery regarding the tooling equipment could be different like pictures. Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader)

number of spindles:6 spindle passage:36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:6 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2001 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Package of 3 Schütte S32PC Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: S32PC Yob: 1998 One machine is operational; the other two can be used for spare parts Includes IEMCA PRA40/33/P loading magazine, built in 1997 (rack type loader) Includes IEMCA PRA40/42/F loading magazine, built in 1999 (bundle loader) Includes IEMCA SIR325 loading magazine (integral loader with bundle magazine) tooling included in delivery may differ from the pictures Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

spindle passage:36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AFH130 with CNC Yob: 1990 eight-spindle automatic lathe 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter delivered tooling: could be different like pictures option: Ergomat TBF42 for cutting off for half finnishing with FMB-Turbo Visiting under production condition is possible Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com