spindle bt40 used for sale

turning diameter over bed: 630 mm turning diameter over slide rest: . mm turning length: 3150 mm hollow: mm Number:: 16304188/ turning diameter: mm weight: 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling printer machine TECNOMAX mod. ROUTER F - Year 2006

High speed vertical milling machine CAMAM mod. FV/1T-1P - Volt. 380/50 - CE rules - Year 1998

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmMax machining diameter320 mmSwing diameter over X linear guideways370 mmClamping chuck Ø210 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)6,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable dat ...

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 1979 Dismantling and removal by buyers Dismantling also possibl ...

This 4-axis MURATA Muratec MD 120 was manufactured in 2009. A CNC 2-spindle, 2-turret precision lathe with FANUC FS31i – Model A control, it features a max turning diameter of Ø 120 mm and a max turning length of 75 mm. Spindle speeds reach up to 4,500 rpm, and it includes a chip conveyor. If you are looking to get high-quality turning capabilities, consider the MURATA Muratec MD 120 machine we have for sale. Contact us for more information.

This EUBAMA S8 rotary transfer machine was manufactured in 2004. It handles parts up to 15 mm in diameter and approximately 300 mm in length. It operates on a 24 V control voltage and requires a 400 V, 50 Hz electrical connection. Weighing a maximum of 5.5 tons, the EUBAMA S8 machine we have for sale is robust and reliable. Contact us for further details regarding this rotary transfer machine.

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 2004 Dismantling and removal by buyers Dismantling also possibl ...

This 12-axis DMG MORI Multisprint 36 multi-spindle turning machine was manufactured in 2019. Ideal for complex turning operations, it offers precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI Multisprint 36 machine we have for sale. Contact us for more information.

Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1) ...

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

8 axis version - 6Linear + 2 axes circular bar capacity 42mm Fanuc 160i IEMCA BOSS 545 E Driven Tools HD coolant system Bürener machine was operated with cutting oil!, Control type: CNC /

This 4-axis KOCH BL 2500 NC select line was manufactured in 2019. Ideal for multi-spindle drilling, this machine ensures precision and efficiency in your production line. Consider the opportunity to buy this KOCH BL 2500 NC select line multi-spindle drilling machine. Contact us for more information.

Manual spindle press, - Maximum filling height: approx. 90 cm, - Pressing area: 102 x 72 cm, Maximum fill level: approx. 90 cm, Pressure area: 102 x 72 cm

This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine.

Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700

This Hüttenhölscher Line multi-spindle drilling machine was manufactured in 2012. It features a PC-controlled function sequence under Windows 7 with TwinCAT, a 6-station loading gantry, and a 2-axis gantry robot. The machine includes a vacuum generation by ejector and multiple conveyor lines for efficient material handling. Ideal for high precision drilling with its advanced control system. Contact us for more information about this machine.

This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for sale.Contact us for more information.

A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.

spindle passage: 230 mm turning diameter over bed: 970 mm turning diameter over slide rest: 720 mm Control: Fanuc OiTD turning length: 2200 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your worksh ...

Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible.

Set of multi-spindle heads from the Swiss brand Pibomulti. Incomplete, lack of clamps and nuts for tightening the bits.

Code: 0294 Brand: SAC Model: TS 120/C Spindle moulder with sliding carriage for milling wood, plastics, composite materials, joinery, window frames and various Technical data: Steel base with cast iron table Table dimensions mm 1100 x 700 Sliding table dimensions mm 1100 x 260 Sliding table stroke 1060 mm Table height 850 mm Shaft diameter 35 mm Max tool diameter 330 mm Vertical spindle stroke 160 mm Spindle rotation speed rpm 2900/4000/5800/8000 Motor power 4 Hp Suction mouth diameter 120 mm Overall dimensions mm 1100 x 1000 x 1200 h Weight kg 580

SCM T 130 LL heavy table milling machine Version LL - long table with extendable frame support Motor 7.5 kW 5 speeds 3000 - 10000 rpm. autom. Spindle adjustment high - low Top control panel Milling fence with fine adjustment WITHOUT feeder Machine is FUNCTIONAL TESTED in GOOD - CONDITION From stock Lieboch

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

This 12s Index MS42C was manufactured in 1998. It features a maximum bar diameter of 42 mm and operates with a fully automatic system, making it suitable for high-volume precision turned parts. The machine is equipped with a Siemens SINUMERIK 840C control system and AC servo drives, ensuring efficient performance. Consider the opportunity to buy this Index MS42C automation equipment. Contact us for further details.

turning diameter over bed: 1350 mm turning diameter over slide rest: 1020 mm centre distance: 6000 mm turning speeds: 5-500(x24) U/min spindle passage: 120 mm turning dia. in gap: 1700 mm total power requirement: 27/41 kW weight of the machine ca.: t dimensions of the machine ca.: m Power compound 4-jaw chuck, Ø 1.000 mm Steady rest, Ø 500 mm Work rest Rapid tool post Coolant system Rapid traverse 2-Axis Trak D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table milling machine Bäuerle Type SFM With 3 rollers feed Spindle diameter 30 mm Motor power 3/4 kW Table size 1100 mm x 900 mm Table opening maximum 400 mm Clamping length of the spindle maximum 130 mm Spindle left/right rotation Speeds adjustable via straps 2800 / 4500 / 5600 / 6000 / 9000 / 12000 rpm With table extension Weight approx. 650 kg

This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information.

This 12s Index MS42C multi-spindle turning machine was manufactured in 2002. It features a maximum bar diameter of 42 mm and a spindle speed of approximately 5,000 rpm, making it suitable for high-quality turning capabilities. Consider the opportunity to buy this Index MS42C multi-spindle turning machine. Contact us for further details.

turning diameter over bed: 1050 mm turning diameter over slide rest: 640 mm turning length: 10000 mm turning dia. in gap: 1310 mm spindle diameter: 120 mm speed: 6-500 (x16) U/min voltage: 380 V total power requirement: 30 HP weight of the machine ca.: dimensions of the machine ca.: m 4-Jaw chuck, Ø 1.000 mm Steady Rest, Ø 700 mm 2 Axis Sony D.R.O. 4 Way toolpost Coolant system Rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle moulder manufactured in 2015. This STETON INDEX machine features a programmable electronic control system with a 10.4” color touch screen, allowing for efficient management of machining parameters. It includes two profiling spindles with a vertical stroke of 265 mm and a maximum tool diameter of 240 mm, providing versatility in operations. Consider the opportunity to buy this STETON INDEX spindle moulder. Contact us for further details.

turning diameter over bed: 800 mm turning diameter over slide rest: 530 mm turning length: 8000 mm turning dia. in gap: 1080 mm spindle diameter: 95 mm speed: 8-800 (21x) U/min total power requirement: 15/22 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-Jaw chuck 3-Jaw chuck 2x Steady Rest 4-Way toolpost The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information.

turning diameter over bed: 930 mm turning diameter over slide rest: 630 mm turning length: 6000 mm turning dia. in gap: 1250 mm spindle diameter: 95 mm speed: 8-800 (x24) U/min total power requirement: 22 kW weight of the machine ca.: 1100 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Multi-spindle drilling machine manufactured in 2000. This SCM Morbidelli Zenith F2 is designed for processing flat materials such as DTD, MDF, laminated boards, and solid wood. It features a maximum working width of up to 3,200 mm and a maximum working height of approximately 800 mm. If you are looking to get high-quality drilling capabilities, consider the SCM Morbidelli Zenith F2 machine we have for sale. Contact us for further details.

turning diameter over bed: 800 mm turning diameter over slide rest: 540 mm turning length: 3500 mm turning dia. in gap: 1100 mm spindle diameter: 95 mm speed: 6 - 630 (18x) U/min chuck diameter: 3-jaw 400 mm chuck diameter: 4-jaw 700 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Power compound 4 way toolpost Steady rest Ø 400 mm 3 Axis D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details.

GeneralUniversal Turning Machine with cycle control and RMS-Sensor; Control: MANUAL PLUS Main drive 1Type of main driveAC Drive power (100% DC)12 kWSpeed range10 - 3000 rpmNumber of Gearsteps2 Max. torque (40% DC)920 NmWorking areaSwing diameter over guide ways500 mmSwing diameter over transverse guideway285 mmCentre height1000 mmTransverse stroke260 mmWork spindle (left)Spindle noseacc. To DIN 55027 Diametre of spindle nose8 Spindle bore70 mmSpindle diametre on front bearing120 mmSlide 1Rapid traverse in X8 m/minRapid traverse in Z10 m/minFeed rate in X5000 mm/minFeed rate in Z5000 mm/minFeed rate torque (100% DC) in X500 daNFeed rate torque (100% DC) in Z1000 daNFloor space/WeightDimensions (L x W x H)3,1 x 1,95 x 1,83 mWeight approx.2900 KgMiscellaneousColour Disk turret, Sauter, DIN 69880-30 mmDisk turret, 8 stations for fix tools, make Sauter, tool reception DIN 69880-30 mm mounted  ...

turning diameter over bed: 1020 mm turning diameter over slide rest: 620 mm turning length: 4000 mm turning dia. in gap: 1250 mm spindle diameter: 105 mm speed: 8-1250 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle machine on wooden base frame

Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgPre-setting PackagePre-setting Package: - tool ...

height of spindle adaptable: by hand spindle diameter: 35 mm motor: 3/4 kW

Milling spindle diameter: 50mm Useful span: 240mm Milling spindle speeds: 4400/6400/7000/9400 tr/min Motor: 7.5 kW Table dimensions: 1100 x 800mm Max milling diameter: 220mm Extension table: 200x1000mm + 200x2000mm Attachments: 2pcs 145x500mm Dust extraction diameter: 150mm

Spindle moulder with tilting spindle, table with extensions Table length: 2,50 m. Support rail in the front Spindle diameter: 35 mm Motor 5,5 kW Spindle speed, manual adjustment, 3000/4500/6000/7500/10000 r/min

Cast iron table Lateral tenoning carriage Spindle diameter 50 mm. Table 110 x 90 cm Support rail in the front Motor 4 kW 5 spindle speeds: 2900 - 4400 - 6000 - 8000 - 10000 tr/min