spin pack used for sale

Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle

Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer

Index HE 25 with rod feed hydraulically controlled with long turning device

Linear drive, spindle axis, stroke 1135, EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo spindle axis, linear module, liner drive, linear slide EGC-120-1135-BS-25P-S-KF-0H-MR-GV, 556809, Overall dimensions: 1625x130x110mm, approx. 55kg, slide 300x70mm, stroke 1135mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded i ...

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.

Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm

SCM Spindle Moulder Model T150 with Tilting Shaft - spindle moulder shaft inclination -10 / +45 degrees - spindle moulder shaft diameter 35mm - max tool diameter with profile guide 250mm - maximum tool diameter that can be retracted under the table 320mm - "Fast" sector table for optimizing the support of the piece under the tool, adjustable from the outside, as an alternative to the table rings Machine with: Flat "LL" version with 2 profile extensions - length 2500mm, complete with adjustable front support bar for large pieces, and with emergency button Guide and spindle moulder shaft with electronic programming Complete with: - Hanging control panel - total excludability of the guide from the plane - 3-axis microprocessor electronic programmer for automatic programming of the different Positions : spindle moulder height Spindle moulder tilt Positioning gui ...

with rod pipe

various accessories / spare parts for Tornos AS 14

In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.

SN.: 16210512 Equipment / other information: Tool

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)

We have complete Barmag POY spinning lines, YOM 2004, 2 kinds of widers, ACW 4T 1200/8, ACW 1500/10. each model 48 pos. available very good condition. Serious buyers contact us.

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Spindle motor, electric motor Manufacturer: Baumüller Type: GFSG 71 M Leistubg: 2.9 kW Rotational speed 2000 rpm 20.4 A 155 V

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Permanent magnet motor, electric motor, servo motor, spindle motor, permanent magnet three-phase servo motor, permanent magnet DC servo motor, DC spindle motor Manufacturer: Fanuc, DC Spindle Motor -Type: 3-S TG 6 -Shaft: Ø 42 x 110 mm -Dimensions: 830/220/H288 mm -Weight: 70 kg

Multi-spindle head, multi-spindle drill head, drilling gear -Multispindle head -Spindles: 7 -Socket: Ø 20 x 30 mm -Number: 2x built-in drill -Dimensions: Ø 120/290 mm -Weight: 2.2 kg

Compressive force: 170 t Spindle Ø: 160 mm Table support surface: 700 x 900 mm Plunger area: 500 x 800 mm Gr. Distance between table and plunger: 450 mm Drive motor: 380 V, 11 kW Weight: 8200 kg

Spine heating plate Schmedt PräPara; good condition; cleaned and tested; Max. Book height 640mm; Max. Block thickness 110mm; Adjustable inclination. Book cover heating plate Schmedt PräPara; good condition; cleaned and chekced; max.book hight 640mm; max.block thikness 110mm; adjustable in tilt.

CNC SPINNING LATHE MANUFACTURER: M+M MODEL: HF450TT/2S SERIAL NUMBER: 26-2453-00 YEAR: 2000 CONTROL MANUFACTURER AND MODEL: Tracktronic Z-AXIS CENTER HEIGHT: 419mm DISTANCE BETWEEN CENTERS: 1200mm Z -AXIS TOOLING ADAPTER: DIN 55027/ Size 15 Z-AXIS DRIVE POWER: 80kW Z -AXIS DRIVE ZF REDUCTION RATE: 1:4 Z-AXIS DRIVE SPEED: 0-1000 RPM step less variable X - SLIDE TRAVEL: 500mm X - SLIDE FORCE: 100kN X - SLIDE VELOCITY: 400mm/min Y - SLIDE TRAVEL: 275mm Y - SLIDE FORCE: 100kN Y - SLIDE VELOCITY: 400mm/min TAILSTOCK TRAVEL: 600mm TAILSTOCK CLAMPING FORCE: 80kN EJECTOR TRAVEL: 450mm COOLANT: yes POWER 3PHASE / 50-60 Hz / 200 - 500 Volts: 3PH/60Hz/480V existing SPECIAL FEATURES OR ADDITIONAL ITEMS: POWER RATING 204 HP (152 Kw), CONTROL VOLTAGE 110VOLT / 24 VOLT DC MACHINE WEIGHT: 22000 kg CONDITION: EXCELLENT - VERY LIMITED USE

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Codice: 0222 - AI

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Spreading spindle, textile goods feeding device -Original husband spare part -for husband Rolex machines and others -Diameter: 50 mm -Length: 1540 mm -3 common -Weight: 8 kg

Carestream (Kodak) Full Leg Spine Mount Tripod DirectView CR with 4 Kodak GB cassettes • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Spreading spindle, textile goods feeding device -Original Ehemann spare part -for Ehemann Rolex machines and others -Diameter: 50 mm -Length: 1266 mm -3 common -Weight: 6 kg

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

Spreading spindle, textile goods feeding device -Original Ehemann spare part -for: Ehemann Rolex machines and others -Diameter: 50 mm -Length: 2570 mm -6 common -Weight: 24 kg

Spindle drive, Simotics, 1PH8103-1MG02-0BG1-ZNO.YF, Siemens, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Siemens and is therefore in a mint condition. - Asynchronous motor, spindle drive - Power: 7,5 KW - 380V / 3 pol. - max. 9000 rpm - max. 77 Nm - max. 42 A - 47 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.