spin pack used for sale

Packaging stanchions, e.g. for Gilnhammer plates Foldable, carpeted inside, stabilization with chain at the top Auction-ID: A1-45889-2853

John Deere R Series Parts John Deere 6030 Series Parts John Deere 7030 Series Parts John Deere 77/7810 series parts John Deere 40/50 Series Parts Various AGCO parts Filters and strings Cab parts Orbitrol R-series Drive shaft R-series Gasket Sets Radio Motor wiring harness Autopower spare parts 77/7810 series Hydraulic pump 4050 series Side cover 77/7810 series Towbar and fender parts Front Loader Rack 6030 Series Exhaust manifold Air compressor Heat shield PTO Shaft Adjustment 6030/7030 Series Fluid coupling Nitrogen balls Kubota cylinder head with water pump Auction-ID: A1-40135-206

Auction-ID: A1-45889-2961

Packaging stanchions, e.g. for Gilnhammer plates carpeted inside Auction-ID: A1-45889-2883

Gilnhammer Packing Handle for 24 Plates 3000mm x 1000mm https://www.gilnhammer.de/g40classic https://youtu.be/CD61COI2N5k Auction-ID: A1-45889-10

Auction-ID: A1-45889-2975

White lacquered white bridge table with plexiglass insert (10cm wide) and footstay Auction-ID: A1-45889-457

Side table HAY DLM XL white Slight signs of wear Auction-ID: A1-45889-2778

Packaging box for Gilnhammer boards made of OSB 2.50 m x 0.6 x 1.22 m For 15 plates Without castors Auction-ID: A1-45889-2902

4 x Omolon plexiglass table packed in cardboard box 45 x 45 x 110 cm without. Lighting Auction-ID: A1-45889-2628

Gilnhammer Packing Handle for 24 Plates 3000mm x 1000mm https://www.gilnhammer.de/g40classic https://youtu.be/CD61COI2N5k Auction-ID: A1-45889-68

Packaging stanchions, e.g. for Gilnhammer plates Foldable, carpeted inside, stabilization with chain at the top Auction-ID: A1-45889-2620

6 Spotlights Dekolight 707009 Die-cast aluminum, white Sandblast optics 4000 K 2100 lm Auction-ID: A1-45889-352

Gilnhammer Packing Handle for 24 Plates 3000mm x 1000mm https://www.gilnhammer.de/g40classic https://youtu.be/CD61COI2N5k Auction-ID: A1-45889-2508

Auction-ID: A1-45889-2871

Auction-ID: A7-45452-176

traffic cone, Lübeck cones, different sizes mixed lot approx. 60 pieces 80cm approx. 15 pieces 50cm approx. 20 pieces 30 cm approx. 25 pieces Auction-ID: A1-45889-2614

Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system  

Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Capacity: Up to 40 ppm (packs per minute) Formats: 75cl – 3x2 Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Working table height: Adjustable from 0.9 m to 0.95 m Electrical power: 30 kW

Siemens SGT-400 Gas Turbine Package – Year 2017 1. Offer Subject We are pleased to offer for sale a Siemens Energy SGT-400 gas turbine package, manufactured in 2017, in excellent operating condition and available immediately for power generation or industrial applications. 2. Technical Specifications Equipment Offered: Make/Model: Siemens SGT-400 Year of Manufacture: 2017 Type: Natural Gas Turbine Operating Hours: 42,000 hours Output Voltage: 11,000 Volts Frequency: 50 Hz Rated Power Output: Approximately 12 MW Condition: Used – Good operating condition Availability: Immediate This turbine package is suitable for reliable and efficient power generation, cogeneration, or industrial applications.

Packer for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Bottle holders: 5x20, 7x9 or 10x6 bottles., Additional title: Packing machine for bottle crates, Output according to design: 4000 crates/h, Current output approx.: 3000 crates/h , Air consumption: 0 Nm³/1000 bottles, Current: 17,59 A, Voltage: 220/400 V, Frequency: 50 Hz, Compressed air: 4 - 5 bar, Length: 3680 mm, Width: 2940 mm, Height: 2610 mm, Weight: 4200 kg, Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: converted to manual / PLC defective, Material: stainless steel / painted black steel, Position: free standing, Base construction: rectangular cycle packer machine on four columns with spherical feet, Features: Plexiglas safety screen opening upwards, safety grid, infeed and outfeed conveyors, packing head equipment for 0.5 l, 1.0 l and 1.5 l bottles, control panel conver ...

Additional title: crate packer, Capacity for plastic crates: 500 cycles/h , Power: 11 kW active power/ 15 kVA apparent power, Voltage: 230/400 V ± 5 %, Frequency: 50 Hz ± 2 %, Length: 4170 mm, Width: 2550 mm, Height: 2650 mm, Weight: 4300 kg, Formats: Max. height: product: 360 mmm, plastic crate: 380 mm, cardbord box: 500 mm, Features: 2 heads à 20/24 bottles, construction with T-flange table quick hitch, only work with glas bottles, incl. filled crate inspector, Krones Checkmat

RICO-bottle packer, fully-automated, L-execution, for packing of 500 g yoghurt glasses., Additional title: Bottle packer, Capacity: 24 glasses/phase 500 g yoghurt glasses, Max. capacity: 550 phases/h, Power: 2,7 kW, Voltage: 3x230/400 V, Frequency: 50 Hz, Compressed air: 5 bar, consumption approx. 15 m³/h, Length: 2,35 m, Width: 2,15 m, Height: 2,30 m, Weight: 5000 kg

Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  Capacity: approx. 20 ppm Formats: 1.5 L – 3×2 2.0 L – 3×2 Application: Shrink packaging of PET bottles Configuration: Shrink packer with sealing bar (film only)

Case packer für 10 and 6 packs of 330 ml disposable bottles. Inclusive videojet printer dating machine construction year 2016. The line is controlled via a S7 Touchpad., Voltage: 400 V, Compressed air: 6 bar, Length: 5,4 m, Width: 1,15 m, Height: 1,95 m, Weight: 700 kg, Base construction: on feet, Features: Inkjet Dating machine construction year 2016, hot glue unit

Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data Manufacturer: SMI Model: LSK 45 T Machine type: Shrink wrapping machine (film packer) Year of manufacture: 2002 Capacity: approx. 45 packs per minute Packaging type: Shrink film (with film discharge) Application: Packaging of beverage multipacks Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2 ...

An integrated packaging system Soco consisting of a carton erector and a carton sealer is available. 1) Bottom flap folder Soco F-100P, min. carton width: 320mm, max. carton width: 520mm, max. carton length: 900mm, machine dimensions X/Y: approx. 750mm/1150mm. 2) Carton sealing machine Soco T-402 5-5-7, carton length range: 200mm-750mm, carton width range: 120mm-460mm, carton height range: 95mm-470mm, sealing capacity: 18/min, max. adhesive tape roll diameter: 385mm, weight: approx. 200kg. Including safety guarding, roller conveyor and transfer unit. The system is as new and has only been in operation since January 2026. Documentation available. An on-site inspection is possible.

Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: SMI Model: TF 300 Machine type: Tray forming machine (tray erector / tray packer) Year of manufacture: 2002 Capacity: approx. 23 packs per minute Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment Automatic tray forming system Suitable for beverage multipack tray applications Integration capability into existing packaging lines

Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details Capacity: Up to 45 packs / minute on single lane Last production was 16,000 bph (six packs) Bottles formats: PET bottles with shrinkable PE film 12 x 0,33L 6 x 0,50L 6 x 0,33L 24 x 0,50L Machine drive: Siemens S7 Machine equipped with Infeed conveyor & CE control panel Supplied with spare parts

Automatic bundle packer with integrated grouping device. PLC: Siemens SIMATIC S7-300. Remark: Machine is not complete.

4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43519-16520

Insertion of carpets with max width 3000mm - line around the bundling of several rolls of carpet - afterwards plastic is detached from the mobile knife and the ends are melted together via welding bar. Pak rolls further on the machine and goes towards ultrasonic sealer (generator is missing that generates energy - so it was no longer used but can therefore be put back into operation if generator ultrasonic is installed). Suit continues towards clipper machine (in 2 pieces - see photo). Auction-ID: A3-43519-16521

Serial number: 01170795 Operating voltage: 230/400 V Rated current: 5 A Frequency: 50 Hz Conveyor belt width: approx. 420 mm incl. SIEMENS SIMATIK control Program settings Height holder long: 770 mm Holder straight: 560 mm Z30/Z42: 680 mm Width Holder long: 1280 mm Holder straight: 650 mm Z30/Z42: 650 mm Film tube holder long: 330 mm Holder straight: 220 mm Z30/Z42: 220 mm Auction-ID: A7-46287-117

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery  Meypack VP 531WA wrap-around packer

Tronrud Engineering case packer, type: CP30, serial number: TE1002350, year of construction: 2018, 400 V, 3 Ph, 50 Hz, 25 A, weight: 2700 kg, capacity: 30 cases / minute, plastic infeed belt, belt width: (2x) 30 mm, clearance: 340 mm x 380 mm, plastic outfeed belt, belt width: 330 mm, total dimensions: 4650 mm x 5650 mm x 2570 mm.

Robopac S.p.A. shrink packaging machine, model: Athena 5545/Combi new, serial number: 30139910, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 23.3 A, 12.9 kW, 6 bar, weight: 600 kg, maximum product height: 120 mm, total dimensions: 2700 mm x 1200 mm x 1500 mm.

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

M. No.: 2277

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Weibert WJ-F30 Table milling machine 5.5 KW R + L barrel swiveling 3000 to 10000 U/1 Control Panel top Safety rulers WJ 600500

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12