spi used for sale

General SKU261S241 LocationBarneveld Main Features MaterialStainless steel Volume2000 Ltr. Specified Features - Silo Silocheck Closedcheck Capacityca. 2000 ltr Sizesdia. 1200x2000mm Diameter1200m Cylindrical height1200 Conical height800 Conical bottomcheck Flat topcheck Manhole400x300mm Inletca. 200mm Top connections(3x) ca. 200mm Outlet with vibro bottomcheck Outlet with valvebutterfly valve (pneumatic) Outlet300mm MaterialStainless steel 1.4301 (304) General MakeSpiromatic Year of constructionunknown manufacturer plate is missing Mounted on framecheck Floorspace1,5x1,4 M Total height3,4 M Weight500 KgPaints & coatingsSilosPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpiromaticIndustries > Chemi ...

General SKU279X358 MakeAlfa Laval LocationBarneveld TypeIV Pressure Vacuum possiblecheck Working pressure shell6.5 Bar Vacuum possible shellcheck Working pressure tubes6.5 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface3 m2 Tube capacity16 l. Max. temperature130°C Shell connectionsDN40 Cover connectionsDN40 MaterialStainless steel 1.4404 (316L) General No.18892 Year of construction1991 Mounted on legscheck Floorspace0,80 x 0,65 m Total height1,50 mOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubrican ...

erge-spirale table cooler 185 DM3 Air cooler from 1989, 1 available 6 fans, 185 l, 15 bar Manufacturer: erge-spirale Model: 185 DM3 Type: Table Cooler Serial number: 471-60487 Fans: 6 Volume [l]: 185 permissible. Overpressure [bar]: 15 Year of Make: 1989 Weight [kg]: 2.500 Dimensions LxWxH [m]: 5.20 x 2.45 x 2.00

This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details.

planing width: 405 mm total power requirement: 15 kW Weight: 1900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

planing width: 610 mm total power requirement: 19,5 kW Weight: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 3 St. Number of tools: 8 St. Spindle diameter: 50 mm Dimensions (L/W/H): 4250x1850x2300 mm ! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION ! ! Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel,  ...

Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine.

2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml, Filling volume: up to 250ml, a slight vacuum is drawn and the pouch sealed.: up to 250ml

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2021 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

Key data: 850 mm, 510 mm, 510 mm

General Manufacturer: Spinner Type: VC 850 Year of Make: 2022 Control: Siemens 840DE ShopMill Travel X/Y/Z: X 850 mm Y 510 mm Z 510 mm Working spindle Spindle speed: 18,000 rpm Tool holder: HSK63 Tool changer: 32-fold Voltage Operating voltage: 3x400V +/-10% Power frequency: 50Hz (+/-2%) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring systems in X/Y/Z Multifunction handheld operator Chip conveyor Preparation of standard probes

Unused Bowl Spindle for an Alfa Laval MRPX 409 SGV Separator., Type of Machine: Bowl Spindle, Drive line: 50 Hz

General SKU279X367 MakeSondex TypeSonspy 1400 No.SP10096 Year of construction2014 Mounted on framecheck Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C MaterialStainless steel 1.4404 (316L) General LocationBarneveld Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg CEcheck Extra SpecificationsSpiral heat exchangerOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDai ...

Model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Milling machine head: pivoting/rotating -Feed: in X and Y no feed because no motors are installed (gears are available, see pictures) -Clamping table: 280 x 1300 mm -Travel: X/Y/Z 450/300/325 mm -Spindle mount: SK40 -quill stroke -quill feed: 0.04-0.16 mm/rev -Speeds from: 60 to 3000 rpm -Dimensions: 1700/1530/H2200 mm -Weight: 1362 kg

Brush cylindrical grinder, external cylindrical grinder, internal cylindrical grinder, centering grinder, center grinding machine, hydraulic universal cylindrical grinder, polishing machine -Manufacturer: WMW Heckert, Hydraulic universal cylindrical grinding machine -Spindem lotor: VEB 0.8/1 kW / 1410/2840 rpm -Hydraulic drive: ADDA 0.75 kW -Centre height: 270 mm -Max. material diameter: Ø 320 mm when converted -Brush: max. Ø 250 mm -Center distance: 420 mm -Dimensions: see photos -Base cabinet: with extensive accessories incl. -Dimensions: 1720/920/H1230 mm -Weight: 790 kg

Cylindrical vibrator, tumbling facility, tumbling machine, mass finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood, small waste water system with spray device -Manufacturer: CETEMA, round vibrator type TM 500A -Working container: elastically mounted -Total volume: 500 liters -Outer diameter: 1450mm -Working basin width: 430 mm -Working basin height: 510 - 580 mm -Machine for: deburring, polishing, rounding edges -Dimensions machine: 1570/1430/H1140 mm -Dimensions of waste water system: 1010/520/510 mm -Total weight: 1450 kg

Strapping machine, packaging machine, strapping machine, skin packing machine, pallet wrapper, control panel, control unit, control panel, Simatic panel -Manufacturer: Spinny Siemens, control from pallet wrapper S200 -Text display: Siemens Simatic S7 TD200 6ES7272-0AA30-0YA0 -Quantity: 4x controls available -Price per piece -Dimensions: 180/95/H450 mm -Weight: 2.4 kg/pc.

Pallet Wrapper Turntable, Strapping Machine, Packaging Machine, Strapping Machine, Skinpacking Machine, Pallet Wrapper, Stretch Wrapping Machine, Stretch Film Machine, Pallet Turntable -Manufacturer: Spinny, turntable from pallet wrapper, with drive -Turntable: Ø 1800 mm, approx. 11 rpm -Drive: 0.37 kW -Dimensions: 2800/1825/H460 mm -Weight: 344kg

pallet wrapper turntable, strapping machine, packaging machine, strapping machine, skinpack machine, pallet wrapper, stretch wrapping machine, stretch film machine, pallet turntable -Manufacturer: Spinny, turntable from pallet wrapper, with drive -Turntable: Ø 1800 mm, approx. 11 rpm -Drive: 0.37 kW -Number: 2x pallet wrappers available -Price: per piece -Dimensions: 2800/1825/H460 mm -Weight: 340 kg

Pallet Wrapper Turntable, Strapping Machine, Packaging Machine, Strapping Machine, Skinpacking Machine, Pallet Wrapper, Stretch Wrapping Machine, Stretch Film Machine, Pallet Turntable -Manufacturer: Spinny, turntable from pallet wrapper, without drive -Turntable: Ø 1800 mm -Dimensions: 2800/1825/H150 mm -Weight: 318 kg

Grinding wheel puller, cup wheel puller, double grinder stand puller, surface grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Manufacturer: EHS, grinding wheel dresser, grinding wheel puller -Tip height: 173 to 238 mm -Dimensions: 185/180/H180 mm -Weight: 5.7 kg

Dividing head, dividing apparatus Dividing head, dividing apparatus, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Manufacturer: Zeatz, dividing head Cabezal Divisor Universal -Tip height: 150 mm -Three-jaw chuck: Bison Ø 160 mm, bore Ø 40 mm -Parting head: swiveling 90° -Spindle bore: Ø 28 mm -Dimensions: 470/440/H240 mm -Weight: 61 kg

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

Fully automatic stretch winding machine Spinny S2300 with electromechanical nider holder Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pal./hour (depending on pallet height and type of winding) Conveying height: 500 mm Technical specifications: • Winding cycle, programmable via the electronic control panel and SIEMENS S7-1200, KTP700 Control Panel • Control SIEMENS PLC S7 1200 SAFE and HMI KTP700 • 15 freely programmable winding programs • Turntable stop in the end position • Conveying height: 500 mm • Usable width of roller conveyor: 1000 mm • Photocell for autom. Pallet height detection • Clamp for attaching the film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency converter for adjusting the turntable speed 5 to 15 rpm • Frequency converter for adjust ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm # 6726 Weinig Unicontrol 12 CNC -------------------------------------------------------- Sale on behalf of a customer. Machine connected and ready for demonstration. crosscut saw -------------------------------------------------------- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate -------------------------------------------------------- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm -------------------------------------------------------- 1. tenoning Spindle ---------------------- ...

Spindle support for SUI 80 longitudinal direction

This 3-axis SPINNER MT 500/1000 AT was manufactured in 2000. It features an X-axis travel of 210 mm, and Z-axis travel of 930 mm. The machine includes a robust table size of 520 x 900 mm with a load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MT 500/1000 AT machine we have for sale. Contact us for further details.

A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible.

This 5-axis SPINNER U5-2520 was manufactured in 2016. It features an impressive X-axis travel of 2660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle speed of 10,000 rpm and an automatic tool changer with 2x52 positions. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details.

General Manufacturer: Spinner Type: Microturn LT Year of construction: 2024 Control: Siemens One Travels: X 600 mm Z 350 mm Y +/- 50 mm Switch-on hours: 4,587 h Work spindle hybrid bearing Speed: 10,000 rpm Tool/movement Tool holder: BMT45 with Y-axis Tool turret: 12-speed Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: High-precision motor spindle with a circular shape deviation and 1um Power Chuck Röhm KFD-HS 125 Power Chuck SMW Autoblok BH-D 165-46-3-A05 Various owners and AGW High-pressure system 70 bar including fine filter Chip conveyor Spindle coolers

Mixer silos SPIROFLUX MVRTS 1000 Type : MVRTS 1000 Liters

Mixer silos SPIROFLUX MVRTS 1000 Type : MVRTS 1000 Liters

turning diameter: 250 mm turning length: 600 mm control: FANUC Series 31i-Model A total power requirement: 23 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 2.880 x 2.130 x 1.990 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: AmbaFlex Model: SpiralVeyor SV Year of Manufacture: 2018 Type of Machine : Spiral Conveyor Application: vertical transport of cartons and containers Certification: CE marked Application and Usage These two spiral conveyors were installed as part of a conveyor system to transport cartons from the goods receiving area on the ground floor up to the first floor, and to return them back down to the ground floor after the packing process. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Type : S300 Rotating table diameter : 1500 mm, 1650 mm, 1800 mm, 2200 mm Capacity : 2000 kg Distance between column and rotating table : 500 mm Wrapping height : 2100 mm x 2600 mm x 3100 mm detected by photocell Table rotation regulated by inverter Table rotation stop position controlled by sensor Customisable film carrier speed Film carrier anti-fall device Work cycles controlled by PLC and electronic cardboard

Carding Machine - Manufacturer: Spinnbau - Year of Manufacture : 2012 - Working width: 2.500 mm Setup: - Card Feeder - Weighing Scale - Breast Cylinder 2x Worker / Stripper - 1x Transfer Roller - Main Cylinder 6x Worker / Stripper - 1x Take-off Roller Cross Lapper - Manufacturer: Autefa - Model: CL3000 - Year of Manufacture : 2012 - Working width: Input: 2.500mm - Output: 2.500 mm - max. Speed: 100 m/min Including: - All Control Cabinets - Control Panel with HMI Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details.

For sale is a high-quality CNC turning-milling center spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Sub-spindle powered tools Chip conveyor extensive tool package Technical data: Bar passage 77 mm 12-speed VDI50 turret Main spindle ASA 8 Sub-spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and sub-spindle Weight approx. 6000–7000 kg Nloc Egsy Uwmws S Rrgob

General SKUR0867 LocationBarneveld MakeP.Spiess-Tschudin AG (CH) Main Features MaterialStainless steel Motor5 KW Surface2.5 m2 Specified Features - Nutsche filter Filter surface2.5 m2 Vessel sizesdia. 1750x400mm Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) With stirrercheck Motor5,0 kW, 380 Volt (Ex) Stirrer can be liftedcheck MaterialCeramic, Stainless steel With jacketcheck General TypeFZS 80 F16 Mach.No.unknow, manufacturer plate is missing Year of construction1967 Mounted on legscheck Floorspace2,1x 2,0 M Total height4,0 M Weight2600 Kg ATEX designedcheck Extra Specificationsbottom provided with permeable tiles ( Silexith)wall with ceramic tilesinspection hatch in the wall 400x300mmOils & fatNutsche filtersPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersFee ...

boring mill, year 2016, CNC Sinumerik 840D. Used machine in good condition. More info & price on IndustrialBuyer.

A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operating temperature min./max.: -10°C/200°C, volume in the tubes/around the tubes: 33l/621l, medium in the tubes/around the tubes: saturated steam/steam. Documentation available. An on-site inspection is possible.

General Manufacturer: Spinner Type: VC750-XL Year of Make: 2019 Control: Siemens 840DE SolutionLine V2 Travel: X 950 mm Y 460 mm Z 460 mm Rapid traverse: 36 m/min Working spindle Speed: 12,000 rpm Power: 11 kW (S6/40%) Tool/movement Tool taper: size 40 according to DIN 69871-A Tightening bolts: according to DIN 69872-A Tool changer: 32-fold Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Multi-function control panel with handwheel and integrated display Chip Conveyor V2 VC750-XL Preparation for high-pressure flushing High-pressure flushing 22 bar (additional tank) Blow-out device for spindle taper Compressed air cooling nozzle on the headstock Option package "Shopmill programming" Preparation of interface for Blum infrared probe TC50/TC52/TC54-20 Linear guide in all three axes Splash protection ...

General SKU212T530 MakeKuehni TypeSR 4 m² No.43608 Year of construction2002 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface4 m2 Tube capacity24,5 Ltr. Number of tubes:1 Tube diameter25 mm Tube length± 5000 mm Wall thickness tubes1,5 mm Max. temperature0/200 °C Shell capacity175 Ltr. Shell diameter492 mm Shell length629 mm Wall thickness shell4 mm Max. temperature0/200 °C Shell connectionsDN50 (2x) Cover connectionsDN25 (2x) MaterialStainless steel 1.4571 (316Ti) General Floorspace0,7x0,5 m Total height1 m Weight180 Kg CEcheckOils & fatConsumer wa ...

General SKU212U086 MakeAlfa Laval LocationBarneveld CEcheck Type3H-C-1T Pressure Vacuum possiblecheck Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface98 m2 Specified Features - Shell and tube heat exchanger Heat exchanger:spiral: Horizontalcheck Heating surface98 m² Tube capacity705 Ltr. Number of tubes:1 Wall thickness tubes2 mm Max. temperature0/100 °C Shell capacity1255 Ltr. Wall thickness shell2 mm Max. temperature0/100 °C Shell connectionsDN250, DN100 Cover connectionsDN100 (2x) Capacity830.8 kW MaterialStainless steel 1.4404 General No.21965 Year of construction2002 Mounted on legscheck Floorspace1,85x1,3 m Total height1,85 m Weight4100 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGe ...

General SKU071F418 MakeCarl Canzler GmbH &: Co. Düren TypeSpiral heat exchanger No.5913 Year of construction1986 LocationBarneveld Pressure Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface4,2 m² Tube capacity31/21 Ltr (Channel A/B) Max. temperature160°C. Max. temperature160°C MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) General Floorspace0,8x0,6 m Total height0,8 m Weight300 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & other ...

General SKU071F416 MakeCarl Canzler GmbH &: Co. Düren TypeSpiral heat exchanger No.5967 Year of construction1986 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface4,2 m² Tube capacity31/21 Ltr (Channel A/B) Max. temperature160°C. Max. temperature160°C. MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) General Floorspace0,8x0,6 m Total height0,8 m Weight300 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed ...

This 5-axis SPINNER U5-1530 was manufactured in 2021. It features an impressive X-axis travel of 1530 mm, Y-axis travel of 530 mm, and Z-axis travel of 465 mm. The machine includes a fixed rigid table combined with a 2-axis rotary/tilt table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-1530 vertical machining centre we have for sale. Contact us for further details.

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360034 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)