spi used for sale

Manufacturer: Heesemann Spindelhubgetriebe, Type: aus LSM 8, Year: 2 Stück, Year :2 Stück

Manufacturer: Signode, Type: Spirit 2000, Bauyeshr : 1993, Control: Programm, Belt width mm: 7, Bandabroller : yes, Bandspannung einstellbar : yes, Feeding belt control: yes, Funktionswiederholung : yes, Ausstattung Fahrrollen : yes, Takleistung min : 25, Foot switch: yes, Kartonformat min. L x B x H mm: endlos x 1200 x 1200, Year :1993

used Kettle for spiral mixer Boku 240 extendable, overhauled, for 240 kg dough, bowl depth approx. 55 cm, diameter outside approx. 100 cm, 2 pieces in stock

TO WHOM IT MAY CONCERN; WE VE 2 SETS NEW UNUSED SPIROFLEX EJN-180 COUPLINGS AT STOCK. ( EX STOCK ) ( LEFT AND RIGHT ) PLS FIND DETAILS ON BELOW TYPE EJN-180 MD 1272 TESTED & REPORTED. LR HAN 1673452 IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

Manufacturer: Vigano Model: SPIANATRICE Year of Manufacture: 2005 Control System: Siemens S7 Max. Strip Width: 1500 mm Strip Thickness Range: 0.8 – 3.5 mm Number of Rolls: 17 Roll Diameter: 54 mm Type of Machine: Leveling Machine Find more here - / Contact us at -

Specifications: Manufacturer: Spinner Type: SB-CNC Year of Make: 1998 Control: Siemens 840D Travels: X 250 mm Z 285 mm Switch-on hours: 32,156 h Main spindle: Spindle speed: 5,000 rpm Spindle passage: 42 mm Tool holder: Tool holder: Multifix A on linear beam Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Collet chuck Interface for bar feeders The machine has a headstock elevation of 10 mm.

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

x-travel: 1520 mm y-travel: 520 mm z-travel: 460 mm Control: Siemens 840D turning speeds: 12.000 U/min tool change unit: 32-fach tool taper: SK 40 0: 19 kW rapid traverse: 32 m/min B-axis (table): +110 / -90 ° total power requirement: kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,5x2,6x3,0 m 5 axes simultaneous machining - CNC control Siemens 840D - 32-position tool changer (SK 40) - Blast air through spindle - Internal coolant supply 80 bar - Automatic door - Rotary and tilting table: 650x540mm, 500kg - Fixed table: 920x540mm approx. 5000h running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 14000 mm, 1500 mm, 3000 mm

Stock number 1110049 Machine Type: CNC Long Bed Milling Machine Make FPT Type Spirit 130 Year of construction 2012 Control type HEIDENHAIN TNC Itnc 530 X-off (mm) 14,000 Y-displacement (mm) 1,500 Z-off (mm) 3,000 Speeds of (rpm) max. 4,000 Tool holder Iso 50 Rapid traverse max 25,000 mm/min Tool changer for 60 tools in really top condition and the machines can be demonstrated under power Information: CNC Control One 29,766 hours Program leach 9655 hours

A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package  ...

turning diameter: max. 250 mm turning length: max. 900 mm control: FANUC SERIE 0-T turning spindle: Durchlass 75mm chuck diameter: 250 mm turning speeds: 0-3700 U/min transmission ratio: 2 tool numbers: 12 feed speeds: X/Z 15/20 mm/min quill stroke: 100 mm diameter of quill: 110 mm tool adaptor: MK 4 coolant tank: 130 l weight - pallet system: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mm turning length: 1090 mm control: FANUC Serie 18i-TB turning spindle: Durchlass 108 mm : 250 / 315 turning speed range: 0-3750 U/min Feed speed: 18/24 m/min. workpiece: 12 quill stroke: 100 mm diameter of quill: 110 mm taper MK: 4 number of driven tools: 12 mm turning speeds: 3000 U/min : 22 nm coolant tank: 140 l total power requirement: 22/18,5 kW weight of the machine ca.: 6500 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mm saw band length: 3320 x 27 x 0,9 mm mm cutting width: 330 mm Control: NC capacity 90 degrees: flat: 330x 260 mm capacity 90 degrees: square: 260 x 260 mm band speed: 15 - 100 m/min total power requirement: 2,2 kW weight of the machine ca.: 1,24 t dimensions of the machine ca.: 3,3 x 2,83 x 2,23 m Attention: special price! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two inspection machines for the semiconductor industry, specifically for PCB production, are available. 1) 3D solder paste inspection system Saki SPI-Spider, year of manufacture: 2007, inspection type: tomography, 2) automatic optical inspection system Saki AOI System BF-Frontier II, year of manufacture: 2008, resolution: 18µm, min. board dimensions X/Y: 60mm/50mm, max. board dimensions X/Y: 500mm/460mm, board warp: +/- 50mm. PCB dimensions X/Y: 500mm/460mm, PCB warp: +/-2mm, component clearance top/bottom: 40mm/40mm, rotation: 359°, transport height: 900mm, transport height adjustment: +/-20mm, machine dimensions X/Y/Z: approx. 850mm/1350mm/1250mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

diamter spiral cutter: 70 - 250 mm spiral lenght: 20.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm weight: ca. 130 kg Used spindle support for a Table Type Borer, for example UNION BFK with 110 mm spindle dia. Good condition ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear weigher with spiral conveyor for sliced or pulled meat such as gyros, kebabs, pulled pork, or also minced meat, fresh/humid fruits, fresh vegetables, etc. Weighing range: 50-200g. 6 weighing heads with load cells allow fast and precision weighing. - Specifications: capacity weighing hopper: 5 L | number of weighing heads: 6 | weighing range: 50-200g | accuracy: +/- 1-10g | max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 1-phase | touch screen control | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times fro ...

Linear weigher with spiral conveyor for sliced or pulled meat such as gyros, kebabs, pulled pork, or also minced meat, fresh/humid fruits, fresh vegetables, etc. Weighing range: 10-3000g. 2 weighing heads with load cells allow fast and precision weighing. - Specifications: capacity weighing hopper: 5 L | number of weighing heads: 2 | weighing range: 10-3000g | accuracy: +/- 1-10g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | touch screen control | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times f ...

Very large weigher specifically for fresh/humid fruits, meat, vegetable etc. - Weighing unit with 8 linearly arranged weighing heads, memory hopper for a higher accuracy and speed , spiral conveyor supply. Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: stainless steel | protection class IP65 | max. speed of the machine in neutral: 45 cycles/minute | weighing range 10-2500g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All  ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 45 cycles/minute | accuracy: +/- 0.1-3.0g | hopper volume: max. 1l | weighing range: 10-2000g | power: 220V, 1.5kW | stainless steel | IP64 | machine dimensions and weight: L2320xW840xH1820mm, 350kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In additio ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | accuracy: +/- 0.5-2.5g | hopper volume: max. 0.5l | weighing range: 20-500g | power: 220V-240V, 1.5-2.0kW | stainless steel | IP54, weighing heads and memory hopper are made of polypropylene | machine dimensions and weight: L1294xW789xH1100mm, 320kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 d ...

SPIROFLUX Dryer W x L x H 80 x 55 x 160 cm

Manufacturer: Spinner Model: TG 52-MC Year of Manufacture:2004 Electrical Specifications: - Voltage: 400 V (3 Phase + PE) - Frequency: 50/60 Hz - Current (Nominal): 35 A - Current (Operating): 34 A The machine is equipped with an FMB bar loader 5-55. Find more here - / Contact us at -

Artec Spider 3D scanner in very good condition with accessories (power supply, USB cable). A license for the Artec Studio software must be purchased through Artec. Transferring the existing license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up t ...

Transport height range: 800mm-1000mm, buffer capacity: 10 blanks, blank length range: 70mm-460mm, blank width range: 50mm-460mm, blank thickness range: 0.3mm-3mm, max. individual blank weight: 2kg, max. total blank weight: 20kg, cycle time (FIFO): less than 15s. Machine dimensions X/Y/Z: approx. 1150mm/1400mm/1550mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

SPECIFICATIONS: Operation of the machine with rotating ring, diameter mm: 400 Installed power: 2.7 kW EQUIPMENT: 01 Roller conveyor for loading 01 Roller conveyor for unloading

Manufacturer: TIBO Model: 3-Spindel Type of Machine : Deep Drilling Machine Technical Data Deep Drilling Unit: - Control: Mitsubishi (Semi-NC) - X-axis travel: 14,000 mm - Y-axis travel: 300 mm - Z-axis travel (max. bore depth): 2,650 mm - Number of drilling spindles: 3 - Spindle spacing: 325–375 mm - Motor power per spindle: 22 kW - Table dimensions: 6,000 x 4,000 mm - Number of tables: 2 - Max. workpiece weight per table: 50 tons - Max. workpiece dimensions per table: 6,000 x 4,000 mm - Max. total workpiece dimensions: 12,000 x 4,000 mm - Max. bore diameter: 65 mm Milling Unit: - X-axis travel: 14,000 mm - Max. milling diameter: 52 mm (HSS roughing cutter) - Milling spindle power (S1/S6): 8.7 / 13 kW Manual Upright Drilling Machine: - X-axis travel: 14,000 mm - Z-axis: not specified - Max. bore diameter: 50 mm - Special feature: Table can be raised or lowered by 300 mm Tool ...

Key data: 32 mm, 8000 1/min

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,131 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,616 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2017 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 39,889 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Key data: 32 mm, 8000 1/min

Specifications: Manufacturer: Spinner Type: SB 32-V4 Year of Make: 2015 Control: Fanuc Series 32i Model B Travels: X 250 mm Z 285 mm Switch-on hours: 52,356 h Spindle Spindle speed: 8,000 rpm Spindle passage: 32 mm Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: C-axis Preparation Interface Bar Feeder Linear Tool Carriers Collet chuck

Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

The Apollo Spiral Conveyor Elevator is a specialized piece of equipment used in material handling and packaging processes. Here are some of its key features and functions:, - Space-Saving Design: The spiral design allows for vertical movement of products within a compact footprint, making it ideal for facilities with limited space., - Continuous Flow: It provides a smooth and continuous flow of products, ensuring efficient transportation between different elevation levels (e.g., moving items from a lower level to a higher one)., - Versatile Applications: This conveyor can handle various types of products, including packed bags, boxes, and other materials, making it suitable for a variety of industries such as food, beverage, and logistics., - Gentle Handling: The conveyor design minimizes product damage during transport, which is crucial for fragile items or those that require careful ha ...

Manufacturer: SPINNER Model: SERVO - LOAD 80 - 1200 Year of Manufacture: 2011 Voltage (U): 3/PE ~ 400 V Frequency (f): 50/60 Hz Input Current (Iᵍ): 5 A Fuse Rating (Iₙ): 10 A Find more here - / Contact us at -

cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine parameters with additional soft keys + backlit disp ...

cutting range: 300 mm capacity 90 degrees: flat: 330 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 270 x 200 mm capacity 45 degrees: square: 250 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm capacity 60 degrees: square: 180 mm automatic feeds: 9999,9 mm feed: minimum 2 mm cutting diameter: minimum 5 mm band speed: 15 - 100 m/min vice: 340 mm Öffnung dimensions of saw-band: 3650 x 27 x 0,9 mm Control: total power requirement: 2,2 kW weight: 1240 kg range L-W-H: 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine parameters with additional soft keys + backlit disp ...

Height=1.67 m, Overall length= 3.65 m, Overall width= 0.96 m, Net weight= 365 kg,

SPECIFICATIONS: Dowel: Ø 8 Capacity: 4000 dowels/hour

For sale is a Artec Spider A high-precision, portable 3D scanner for demanding applications. The scanner is ideal for capturing small to medium-sized objects with complex geometries and fine details., Technical highlights:, - Model: Artec Spider, - Technology: Structured light 3D scanning, - Accuracy: Up to 0.05 mm, - Resolution: Up to 0.1 mm, - Detection range: Precise capture of fine details in complex shapes, - Data format: Compatible with all common 3D CAD and reverse engineering programs, - Connections: USB, Plug & Play, Advantages:, - Very high level of detail for the finest structures, - Fast data capture in real time, - Compact, lightweight design ��� mobile use, - Ideal for quality control, reverse engineering, industrial design, medicine, monument preservation, and much more., Condition:, - Used, good condition, - Fully functional and ready to use, Scope of deliv ...

Fanuc FANUC SPINDLE AMP A06B-6088-H226#H500

Key data: 280 mm, 500 mm

Turning lenght 500 mm Turning diameter 280 mm Controller Fanuc 32i 12 stations VDI30 tool holder

A Klotzki spiral crate washing machine for open plastic beverage crates is available. Crate dimensions X/Y in longitudinal flow: 400mm/300mm, crate dimensions X/Y: 200mm/300mm, crate height range: 270mm-300mm, conveying direction: cross flow, throughput capacity: 1500-2000crates/h, treatment section: approx. 34m, number of units: 48pieces, material: stainless steel, treatment time at 1700 and 2400crates/h: approx. 91s/65s, crate infeed height: 1100mm, crate outfeed height: 4100mm. Machine dimensions X/Y/Z: approx. 3000mm/2000mm/5000mm, weight: approx. 1500kg, control system: Logo. Without platform. The crate indexing and spraying units may need repair. Documentation available. A visit on site is possible.

Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan

Height=1.6 m, Overall length= 0.66 m, Overall width= 0.7 m, Producer: Kemper power: 2.6 / 3.2 kW / 380V condition: Renovated In stock Made in Germany Description The mobile spiral mixer optimal mixing results even with very small quantities max. 80 kg dough / 50 kg. flour bowl spiral and guard from stainless steel two speeds wheat mixed wheat mixed rye rye doughs

turning diameter: 310 mm turning length: 600 mm control: Sinumerik 810 D PL Siemens turning diameter over bed: 425 mm Main spindle: turning speed range - main spindle: 500 - 4.500 min/-1 max. Torque: 280 Nm power capacity - main spindel: 16,5 kW Spindle diameter: 100 mm C-Axis: 360 ° chucking diameter: 210-52 mm spindle bearing diameter: 120 mm clamping cylinder: 65 mm Bar feed: max. 65 / (52) mm spindle nose: A8 DIN 55026 axis stroke:: x-axis: 230 mm z-axis: 740 mm rapid traverse X-axis: 15 m/min rapid traverse Z-axis: 24 m/min turret:: tool positions turret: 12 pos. driven statition: 12 pos. tool taper: VDI 30 DIN 69880 Spindle speed driven tools: 6.000 min -1 power capacity - driven tools: 3,7 kW max. Torque: 9,5 Nm tail stock: dia. of quill: MK 4 80 mm quill stroke: 120 mm tailstock adjustment: 475 mm tension force: 500 daN total power requirement: - kW weight of the machine ca. ...

1 YAMADA Single End Sizing Winding machine Mod. YS-6 12 spindles year of construction 1998 with YAMADA TFB meter counter on each spindle squeeze roller sizing application type non-touch yarn break control sensor on each spindle take-up cylindrical traverse 150 mm (6 inch)

General SKU366W1221 LocationBarneveld MakeQVF Glasstechnik No.B2.23 Main Features Shell (Material)glass Tube (Material)glass Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangercheck Verticalcheck Shell diameter230 mm Shell length1200 mm Shell connectionscheck Cover connectionscheck Information Floorspace0,40x0,40 m Total height1,4 mShell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU366W1231 LocationBarneveld MakeQVF Glasstechnik TypeHEB9 Pressure Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes2.7 Bar Main Features Shell (Material)glass Tube (Material)glass Surface1.5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangercheck Verticalcheck Heating surface1,5 m² Max. temperature200°C Shell diameter230 mm Shell length800 mm Max. temperature200°C Shell connectionscheck Cover connectionscheck Information Mounted on framecheck Floorspace0,40x0,40 m CEcheck Total height1,0 mShell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU366W1230 LocationBarneveld MakeQVF Glasstechnik TypeHEU9/A Main Features Shell (Material)glass Tube (Material)glass Surface5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangercheck Verticalcheck Heating surface2x 2,5m² Shell diameter400 mm Shell length2200 mm Shell connectionscheck Cover connectionscheck Information Mounted on framecheck Floorspace0,40x0,40 m Total height2,20 m Extra SpecificationsDouble spiral heat exchanger mounted together, 2x 2,5 m²Shell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU366W1255 LocationBarneveld MakeQVF Glasstechnik TypeR204/444 No.B10.. Year of construction1997 Main Features Shell (Material)glass Tube (Material)glass Surface5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3 Heat exchangercheck Verticalcheck Heating surface2x 2,5m² Shell diameter230 mm Shell length900+700 mm Information Floorspace0,40x0,40 m Total height2,0 mShell and tube heat exchangersQVF GlasstechnikHeat exchangers > Shell and tube heat exchangersBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!