spi used for sale

Dimensions (L/W/H): 2020x920x1160 mm Weight: 750 kg Total power requirement: 3,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x750x1250 mm Weight: 600 kg Total power requirement: 3 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2020x920x1160 mm Weight: 680 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2920x980x1450 mm Weight: 1500 kg Total power requirement: 12 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very good surface grinding machine Table surface / working area 200 x 600 mm

gebr. Table milling machine ALDINGER Type: S 15 Year: 1959 Engine power: 4 / 5 hp (2.94 / 3.7 kW) Doubling the speed via selector switch Left/right rotation via selector switch 6 Speeds: 2,800 / 3,500 / 4,500 / 5,600 / 7,000 / 9,000 rpm Height adjustment by handwheel Extraction connection: 120 mm Table size: 95 x 105 cm Table height: 85 cm 525 kg Unoverhauled - ACTUAL state from carpentry dissolution FIXED PRICE

Hemburg U2.H Motorpower: 950 W Tension needed: 3 x 380 V

Router R8, large table, ready for demonstration from the site.

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

Cup Ø: - mm depth: - mm NUMBER OF TURNS: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral mixer Diosna SP 160 AD/T revised and repainted immediately available in stock for sale. - Extendable spiral mixer with 2 stainless steel boilers - Manufacturer: Diosna Dierks & Söhne GmbH - Type: SP160AD - for a maximum of 160kg of dough or for a maximum of 100kg of flour - With 2 timers, automatic for slow and fast gear - Automatic switching on and off via clocks - With flour dust cover - 2 speeds (gears), slow and fast - Boiler locking via pliers operated with hydraulics - with 2 stainless steel vats - Suitable for almost all doughs - Robust and strong - Tub capacity 260 liters

used Spiral mixer Kemper SP 100 L with stainless steel boiler and stainless steel tool in good condition immediately available for sale. The machine is mobile on rollers with brake and with replica flour rod cover including safety switches. -Manufacturer: Emil Kemper GmbH - Type: SP100L -Stainless steel boiler -Stainless steel spiral -2 x Automatic timers -2 x speeds slow and fast -with flour dust cover -for 100 kg flour or 160 kg dough -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse

A Kemper SPL50 spiral mixer for the production of high-quality doughs, suitable up to a maximum of 80 kg of dough, is currently for sale. The machine has two speed levels, slow and fast, as well as automatic operation which runs via 2 timers. The boiler, the spiral and the guide rod are made of stainless steel. The boiler can be switched to both counterclockwise and counterclockwise rotation. The machine is equipped with new wear parts, 2 new Schleicher timers and the machine has been completely repainted. - Manufacturer: Kemper - Type: SPL50 - Capacity for a maximum of 80 kg of dough or a maximum of 50 kg of flour - 2 speeds: Slow and fast - 2 timers for automatic switching on and off - Manual or automatic rotation selectable - Kneading time per speed adjustable up to 12 minutes. - Boiler with clockwise rotation and counterclockwise rotation - Flour dust cover with safety ...

-Kettle vat for Kemper ECO125AE spiral mixer -Shell diameter approx. 92cm -Kettle interior height: 52.5cm

Transnorm spiral helix belt curve conveyor right 90°-750-650 IR1200 RA2437 Technical data: Frame width (NB): 750 mm belt width (GuB): 650 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,35-1,21 Drive: SEW gear motor with movi-mot frequency converter for stepless speedcontroll Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter KW: 0,55/S1 Construction year: 2001 B ...

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

Spiral mixer DIOSNA, type: SP 24 -Very good condition- - Kneader suitable for up to 24 kg dough - With timer - 2 speeds - Rideable - Condition: Very good, ready to use Inspection and test run are of course possible by arrangement.

The used Kemper ST75A spiral mixer with 2 stainless steel boilers each is immediately available in our warehouse in Bielefeld. - Type: ST75A - a machine with 2 boilers - for max. 75 kg flour or for max. 120 kg dough - With 2 automatic timers - Shell diameter 76.5 cm - Boiler capacity: 175 litres - Boiler drive via friction wheel - Boiler can be manually locked - Extendable - With 2 timer relays automatically - 2 speed settings: fast and slow - Flour dust cover - Stainless steel spiral and tool - Boiler also made of stainless steel - Machine is anchored to the ground with 2 screws - Machine head moves up or down when the boiler is retracted and retracted - 400 volt power connection - Robust and stable machine - Machine completely repainted - All wear parts renewed More information and pictures, as well as shipping costs and trade-in on request. We are constantly ...

Used spiral mixer DIOSNA, type: SP 40 -in bakery condition- - 2 speeds - 1 time clock - Boiler and spiral made of stainless steel - Good condition, technically tested and cleaned - Kettle volume: for max. 40 kg dough - El. Connection: 280 V, 50 Hz, 6.5 A

Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Spiral dough mixer 120 kg dough Diosna Power in flour: 75 kg Bowl contents: 180 liter Digital control keyboard with program memory Cover with safety switch Castors with brakes Voltage: 400V / 50Hz / 3 N/PE Electric power: 6.5kW

Spiral dough mixer Capacity: 100 kg of flour 160/180 kg of dough Diosna Container volume: 260 liters Electrical power: 380V / 50Hz / 3N/PE Two timers Two speeds Rewind option Half cover with safety switch Wheels with brakes

Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 50kg of flour Voltage: 400V / 50Hz

Dough mixer With paddle Kemper The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Dough mixer Manufacturer: Diosna With paddle Stainless steel bowl Volume: 80 liters Dimensions: 75x70x100cm Electric power: 2.5kW Voltage: 380V 50Hz

Dough mixer Manufacturer: Diosna With paddle Stainless steel bowl Volume: 180 liters Dimensions: 90x95x135cm Electric power: 3.5kW Voltage: 380V 50Hz

Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.

max. wheel diameter: 500 mm gear width: 200-400 mm module: 12 turning speeds: 0-3250 U/min bracke pressure: bis max. 95 Nm inner taper: Konus #39 Control: Fanuc 16 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral mixer Diosna SP120D - Type: SP 120 D - Rideable - for max. 75kg flour or for max. 120kg dough- - With 2 automatic timers - Spiral and boiler made of stainless material - Kettle diameter 75cm - Boiler capacity approx. 180 litres - Machine can be moved on castors with a swivel castor - Locking by 2 brakes - With plastic flour dust cover - 400 Volt Frequency 50 Hz - 8 kW 18A - Weight of the machine approx. 550 kg - Year of construction 2012

Diosna SP160A Spiral Kneading Machine Stainless steel boiler, extendable Spiral stainless steel neither welded nor cracked two clocks, each for first and second speed Hydraulic raising and lowering of the head to remove the dough or the kettle Machine has a neat and quiet run, should be thoroughly cleaned before use Video about test run available

SINMAG KM25 Spiral kneading machine used Year of manufacture 2014 from plant closure two speeds, three gears (first gear reversible as mixed gear) Kettle, spiral and dough crusher made of stainless steel not tinkered with Machine in very good condition Machine can be controlled digitally and optionally also operated analogue via the side switch Three clocks for mixing and both kneading speeds Boiler with clockwise and counterclockwise rotation Machine must be thoroughly cleaned before use Video about test run available

Milling printer machine TECNOMAX mod. ROUTER F - Year 2006

High speed vertical milling machine CAMAM mod. FV/1T-1P - Volt. 380/50 - CE rules - Year 1998

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 spindles moulder SCM mod. COMPACT 23K Composition: - 1st bottom horizontal spindle - 2nd vertical spindle right - 3rd vertical spindle left - 4th horizontal top - Working width mm. 230 mm. - Infeed table 2000 mm. - Year 2000 - CE rules

Automatic spindle moulder CASADEI mod. MATRIX 5 (4+UNIVERSAL) - CE rules - Year 2005 - Composition: Horizontal bottom Vertical right Vertical left Horizontal top Universal - Total installed power Kw 31,9

This 4-axis MURATA Muratec MD 120 was manufactured in 2009. A CNC 2-spindle, 2-turret precision lathe with FANUC FS31i – Model A control, it features a max turning diameter of Ø 120 mm and a max turning length of 75 mm. Spindle speeds reach up to 4,500 rpm, and it includes a chip conveyor. If you are looking to get high-quality turning capabilities, consider the MURATA Muratec MD 120 machine we have for sale. Contact us for more information.

-Spiral mixer - Manufacturer: Enerhardt GmbH - Type: Maximat MAK N160 - with 2 speeds - With automatic timer - for max. 160kg dough

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 1979 Dismantling and removal by buyers Dismantling also possibl ...

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 2004 Dismantling and removal by buyers Dismantling also possibl ...

This 4-axis KOCH BL 2500 NC select line was manufactured in 2019. Ideal for multi-spindle drilling, this machine ensures precision and efficiency in your production line. Consider the opportunity to buy this KOCH BL 2500 NC select line multi-spindle drilling machine. Contact us for more information.

Spiral mixer Kemper ST 125 A + 2 boilers Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Bowl diameter 90cm Tub capacity: 300 liters Boiler drive by friction wheel Boilers are manually locked extendable with 2 timer relays automatic 2 speeds fast and slow Flour dust cover Spiral and tools made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is retracted and extended. 400 volt power connection Robust and stable machine Tested for function

Used spiral mixer for bakery and confectionery. Diosna Spiral Mixer SP 80 D - 2x speeds slow and fast - 2x automatic timer - Flour dust cover - Stainless steel boiler - for max. 80Kg dough or max. 50Kg flour -Boiler content: 122 liters - Mobile on castors with brake

This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine.

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm General No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX designedcheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steelWith sound proof cabinetWorking hours 56 hrsSpicesBall millsCatalysts & fillersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsSiebtechnikIndustries > Food & Feed > SpicesMills > Ball millsIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries  ...

Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1) ...

A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026.

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing