spi used for sale

Turning length 650 mm Z-axis 650 mm X-axis 170 mm

Spiral Kneader Diosna SP 120 AF Spiral kneader Diosna SPV 120 AF extendable - Spiral kneader extendable - for max. 120 kg dough or .max 75 kg flour - 2 speeds -Membrane keyboard - with 1 extendable stainless steel boiler - Spiral made of stainless steel - with pliers locking - Boiler is with friction wheel drive - Head hydraulically raising and lowering - Vat capacity 180 litres

incl. additional indexing table 4/5 axis machining

This 9-axis Muratec MT200 multi-spindle turning machine was manufactured in 2019. It features a maximum bar capacity of 65 mm and a chuck size of 210 mm. The machine includes an impressive maximum feed speed of 24 m/min on the X-axis and 36 m/min on the Z-axis. If you are looking to get high-quality turning capabilities, consider the Muratec MT200 machine we have for sale. Contact us for further details.

Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts

Diosna Kneader Type: S35 Plus Stainless steel boiler Stainless steel lifting arm Flour dust cover 1x timer with lock Height: 100cm Width: 70cm Depth: 70cm

This 4-axis MORI SEIKI RL2500 was manufactured in 2003. It features a maximum turning diameter of 400 mm and includes two turrets with 12 stations each, providing efficient machining capabilities. The machine is equipped with a Mori Seiki MAPPS MSX-501 control and has a spindle speed of 3500 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI RL2500 multi-spindle turning machine we have for sale. Contact us for further details.

Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

VMI Spiral Kneader Type: MB1024 AEH Specifications: – Automatic timer switching on and off – 2 speeds slow and fast – with 1 boiler – with flour dust cover - Year of construction 1999 Height: 180cm Width: 140cm Depth: 120cm

Spindle moulder manufactured in 2013. This PANHANS 245 features a robust table size of 1100 × 760 mm and a spindle height adjustment of 125 mm. It operates at spindle speeds of 3000, 4500, 6000, and 9000 rpm, making it suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the PANHANS 245 spindle moulder we have for sale. Contact us for further details.

This 3-axis HOMAG WEEKE OPTIMAT ABD150 was manufactured in 2014. It is a used multi-spindle drilling machine designed for precision drilling and dowel inserting. If you are looking to get high-quality drilling capabilities, consider the HOMAG WEEKE OPTIMAT ABD150 machine we have for sale. Contact us for further details.

Spine round machine Top condition, cleaned and tested

TECHNICAL DATA: Vertical milling machine Tool shank diameter mm: 35 Dimensions of the work table mm: 2400 extendable in width 4 speeds, self-braking Installed capacity KW: 5,5

Balestrini linear milling machine two milling units pneumatic pressure of elements

Spiral kneader for 80 kg dough Dust cover stainless steel 2 drives (shell and dough hook separated) Mobile on wheels/ Weight 390 kg Exhibition machine therefore special price

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

The Diosna SP 160D mixer is suitable for every test. Reliability and German quality are the main advantages of Diosna mixers. Two-speed spiral dough mixer. The bowl and dough kneading organ are made of stainless steel. Technical data: - stainless steel base and spiral, - protective lid with safety switch, - max. flour quantity: 100 kg, - max. dough quantity: 160 kg, - 2 speeds; 2 timers, - electromechanical control panel, - automatic changeover from first to second speed, - reverse rotation for easy cleaning. Warranty on all parts - 6 months. Call and arrange a demonstration of the machine!

used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Suitable for any test. Reliability and German quality are the main advantages of Diosna kneading machines. Two-speed spiral dough mixer. The bowl and kneading organ are made of stainless steel. • Dimensions: 850x1300x1250mm, • stainless steel base and spiral, • power 5 kW; power supply 400 V, • max. quantity of flour: 75 kg, • max. dough quantity: 120 kg, • 2 speeds; 2 timers, • electronic control panel, • automatic transition from first to second speed, • reverse rotation for easy cleaning

Suitable for any test. Reliability and German quality are the main advantages of Diosna kneading machines. Two-speed spiral dough mixer. The bowl and kneading organ are made of stainless steel. • Dimensions: 850x1300x1250mm, • stainless steel base and spiral, • power 5 kW; power supply 400 V, • max. quantity of flour: 75 kg, • max. dough quantity: 120 kg, • 2 speeds; 2 timers, • electronic control panel, • automatic transition from first to second speed, • reverse rotation for easy cleaning

Suitable for any test. Reliability and German quality are the main advantages of Diosna kneading machines. Two-speed spiral dough mixer. The bowl and kneading organ are made of stainless steel. • Dimensions: 850x1300x1250mm, • stainless steel base and spiral, • power 5 kW; power supply 400 V, • max. quantity of flour: 75 kg, • max. dough quantity: 120 kg, • 2 speeds; 2 timers, • electronic control panel, • automatic transition from first to second speed, • reverse rotation for easy cleaning

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

Diosna D 240a plus with 2 boilers Tipper Diosna HK 166 - after general overhaul

4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)

Spiral kneader Kemper SP 250 A for max 400kg dough Spiral kneader Kemper SP 250 A with 2 stainless steel boilers, functionally tested and cleaned immediately available for sale in stock. The machine is equipped with 2 speeds and automatic timer. The boiler and the mixing tool are made of stainless steel. Optionally available with up to 8 boilers. -Kemper spiral kneader extendable -2 automatic timers -2 speeds -for max. 250kg flour / max. 400kg dough -with flour dust cover -with 2 boilers (optional with more boiler) -Stainless steel boiler, spiral and guide rod -380 volts 50Hz

New machine 24 months warranty Advantages: + tested by our master baker and confectioner with various doughs + very solidly built, power transmission with belt drive + no high voltage current necessary - operation with 230V possible! + with 4 feet and permanently installed boiler + mobile machine, on swivel wheels with parking brake + short kneading times with excellent results + with reverse gear, for mixing the ingredients before the kneading process + 10 kneading speeds, for particularly gentle to intensive kneading + 2 timers, with automatic switchover & switch-off + ideal for small batches + Stainless steel boiler, central rod and spiral + transparent flour dust cap with automatic switch-off + fast spare parts supply within 1-2 working days

Batch / spiral kneader W&P, type: UC50 AC -overhauled- - including 2 tank cars - for 50 kg flour or 80 kg dough - for mischweizen and mixed rye dough - in bakery condition - very nice condition, immediately ready for use - Video with kneader in function on request Inspection and test run are of course possible at any time by arrangement. The machine has been tested and is ready for immediate use.

W&P spiral mixer Type: ST 50 Stainless steel boiler Steel spiral 2 timers 2 speeds Emergency stop switch for max. 50kg flour or max. 80kg dough on castors 380 V 50Hz

Fork mixer with 1 bowl

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

A used spiral kneading machine Kemper SP 125 L is currently for sale and immediately available in our warehouse in Bielefeld. Spiral kneading machine Kemper SP 125 L - Stainless steel boiler - Stainless steel spiral - 2 x automatic timers - 2 x slow and fast speeds - with flour dust cover - for 125 kg of flour or 200 kg of dough The machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.

Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t

90m Trapezoidal threaded spindle, steel, warehouse liquidation, TR30x6 bis TR10x3, , new -75% Single-start, rolled threaded spindles with trapezoidal thread according to DIN 103, in material C35/C45, in many sizes between TR10x3 to TR30x6. Special price These threaded spindles come from a stock liquidation, therefore we offer a bundle with spindles for an absolute special price. The current purchase price of these threaded spindles is € 2354 excl. VAT Our selling price is only 25% that is € 588 excl. VAT Attention: The photos do not correspond to the indicated quantity Scope of delivery: appr 180kg TR30x6 right: 3x780mm TR28x5 right: 1x1940mm, 1x1180mm TR26x5 right: 6x950mm, 1x850mm, TR26x5 left: 1x1900mm, 3x1000mm, TR24x5 right: 2x1570mm, 1x1700mm, 2x840mm, TR24x5 left: 2x2000mm, 1x1120mm, 1x840mm, TR22x5 right: 1x2000mm, 1x790mm TR20x4 right: 1x2000mm, 1x ...

Diosna spiral mixer SP 160 AD/T 2 vats extendable - Extendable spiral mixer - for max. 160kg dough or .max. 100kg flour - with 2 timers - Automatic switch-on and switch-off via clocks - Flour dust cover made of stainless steel - 2 speeds - Boiler locking via pliers operated with hydraulics - Tub capacity 260 litres - robust and strong

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

COMPLETELY RENOVATED

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

We sell a tank wagon for a Sinmag SM 120 A. There are 3 pcs available

Kemper Lifting Kneader F125 ASL extendable with 2 stainless steel shells 2 speeds 2 timers Stainless steel lifting arm Year of construction: 2001 Flour dust cover overhauled and repainted

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg