127,343 used machines on RESALE, but how to find them? Machine Search
The machine packs in full cartons or trays. Capacity up to 80 cartons per minute. The change to the new carton format takes place from the operator panel - very quickly. Siemens S-7 control. Machine dimensions: Length: 9m Maximum width: 3.2m Height: 2.4 m. Weight: 3.5 tonnes The machine is equipped with a set of necessary spare parts for 2-3 years of operation. The machine after complete renovation in very good condition. Ready to work. We provide 12 months warranty. The condition of the machine and the level of modernity ensure many years of operation.
MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input
GEARBOX INFO Listing ID 20102 Make TWIN DISC Model MG 5202 SC Serial No. 3AE 190 Power RPM REDUCTION 2.48:1 General Info Condition Runner Application Marine Weight (kg) 750 KG
Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting
It is a new WP drum for Multimatic head machine type MUC-G 4-row for sale. - Weight range: 52gr. - 58gr. Price on request.
Cutting height: 205 mm Motor output: 11 kW cutting width: 450 mm Cutting length: 5200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t stroke: 7000 mm clamping width: 17508 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bus node, brand new, CPX-FB14, 526174, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. The parts were taken from a brand new valve assembly in its original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law a ...
Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300
The scope of delivery includes: 01x Surface-mounted shelf rack, used Material colour: hot-dip galvanised Total depth: approx. 2,520 mm (lifting rod direction) for double rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Overall width: approx. 1,120 mm (crossbar direction) Bearing rod diameter: 30|1.50 mm Frame height: approx. 30 mm Mesh size: approx. 68 x 45 mm Weight | Pcs.: approx. 30,83 Kg Internal designation: GR-114 Note: The grating may have damage, scratches, dents, welds. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility
TWIN DISC MG 527 5.17:1 800 HP/ 596 kW 1800 rpm Brand: TWIN DISC Model: MG 527 Ratio: 5.17:1 Power: 800 HP (596 kW) RPM: 1800 RPM Used Running Take Out Features Flexible Coupling Type of drive: Spider SAE Housing/ SAE 0 Controls 18 inch, rubber block drive Aluminum ring Weight kg 1500 Dimensions (cm) 120x90x100
From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg
Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes
Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes
Ryobi 524HE in very good condition, 62 mil, in germany Production, Wash units, control panel
Suction Stream Feeder, Double Sheet Control, AAC (Aqua Automatic Control System) Ryobimatic Dampening with Refrigeratino & Re-Circulation Unit, Semi Auto Plate Change, Automatic Ink Roller and Blanket Washing Unit, Low Pile Delivery
clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...
Top and bottom case sealing / taping machine with average production output up to 1000 boxes per hour / 16 boxes per minute and box transfer speed: ·~22 mt/min ~22 mt/min; side mounted drive arms; handwheel for adjusting height. Comes with outfeed roller conveyor. Suitable for cardboard boxes and cases of following sizes: L: 150mm (min) - max (not set) W: 100mm (min) – 500mm (max) H: 100mm (min) – 500mm (max) Tape width: 25mm to 50mm (max), max foil roll DIA: 360mm, reel DIA: 76mm, fitted with Emergency Stop button. Year: 2011 Machine is in excellent overall condition with little use – originates from and established Pharma production site in Europe. Size: L: 1.800mm x W: 1.200mm x H: 1.600mm; W/T: 300kg; comes with stainless steel roller conveyor (machine size: euro-pallet x H: 1.500mm, W/T: 40kg);
Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...
SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...
Very nice Ryobi 524GX, year 2007, 28 mil, autoplate, all wash systems, Alcolor dampening , max 0,6 mm paper
Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence
Mobile semi-automatic taping machine which seals fixed-format boxes with adhesive tape (upper and lower parts). Output: 1000 boxes/h.
turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 6500 kN injection volume: 2011 / 323 cm³ screw diameter: 80 / 45 mm platen size: 1450 x 1350 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection mould ...
Timing belt pulley, slewing ring, -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Mounting: Bolt circle Ø 490 mm Ø 18 / M16 -Dimensions: see photos -Overall dimensions: Ø 520 x 200 mm -Weight: 79 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Wabco Westinghouse, compact cylinders -Stroke travel: 900 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm/M20x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 1165/95/H95 mm -Weight: 15.2 kg/piece
8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L
The scope of delivery includes: 01x Steel panel, used Material color: sendzimir galvanized overall width: approx. 520 mm Total depth: approx. 195 mm Height: approx. 22 mm Material thickness: approx. 1.00 mm
MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg
PLC control, electronic module, noise filter -Block Part.No.: B 0901031 -UR: 520 V 50-60 Hz 30 Aac -Dimensions: 270/70/H95 mm -Weight: 1.7 kg
Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 85/56/H45 mm -Weight: 0.35 kg/piece
Ryobi 522HE year 2008 Impressions 22 mil Semi-Automatic plate change, Technotrans Refrigeration, Automatic Blanket Cylinders & Inking Rollers washing devices Powder spray, Double Sheet & Side lay Detector Numbering and Perforating unit
The scope of delivery includes: 01x Steel panel, used Material color: sendzimir galvanized overall width: approx. 520 mm Total depth: approx. 295 mm Height: approx. 22 mm Material thickness: approx. 1.00 mm
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 233/65/H65 mm -Weight: 2.35 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 405/75/H75 mm -Weight: 3.6 kg/piece
Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm
maximum number of results exceeded
please refine your search
