speed master 74 used for sale

Gear Pump, Transfer Pump with Motor and Filter WMW, ORSTA A20-25-63 VS Pump: AC 1,6 TGL 17-747407 Qmax: 1.6 l/min pmax: 6.3 bar engine: Type 1260.1/1 0.06 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 460 x 250 x 170 mm

Auction-ID: A1-50093-244

Auction-ID: A1-50093-77

Replacement column for IDRA 3300, extendable, D330mm x 7410mm, (4), 240186, Idra, refurbished Special price Replacement column for IDRA 3300, D330mm x 7410mm, Trapezoidal thread TR330 x 10, 4972 kg Refurbished! The column has been overhauled by Strate, is in the original packaging and is in top condition ready for immediate use. We store them in a dry and thermally insulated room. The column can be inspected, tested and collected from us at any time. We would also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, spar nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Year of build: 2009 Serial number: W0940022190L13536 Own weight kg: 6120 kg Auction-ID: A7-48905-1

Incl. accessories, consisting of: a.o. Year of Make: 2015 (2004) WGR1L/ WGR1V - Drip tray, dimensions (LxWxH) approx: 830x840x500 mm Sludge separator for barrel, incl. Control unit Auction-ID: A1-49926-5

MultiDose Basket Dispensing Workstation 74557-0 + MultiDose Plus Service Module 74556-0 + Stand 74559-0 - (Etag 20) THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-227

The Toshiba PVT-745BTV linear probe has a frequency range of 5.8 MHz to 11.0 MHz and is compatible with the following applications: abdomen and small parts. It is compatible with the following ultrasound systems: Toshiba Aplio 300 (TUS-A300), Toshiba Aplio 500 (TUS-A500), Toshiba Viamo (SSA-640A) and Toshiba Xario (SSA-660A). Condition: Used equipment, sold as is Auction-ID: A1-50069-209

inv 1870 - Manufacturer: Sortotec Model: ST-VBB 15 744-05 Year: 1996 Serial Number: 96/110-051 V Overall dimensions (W x D x H): approx. 1800 x 700 x 1900 mm Documentation: not available Auction-ID: A1-49706-9

Pöttinger Jumbo 7470 high-capacity loader wagon with a Tridem axle with K50 forced guidance. Professional machine with a capacity of approx. 49 m³, equipped with a loading system with pick-up, rotor and tracked scraper. It has ISOBUS control, Load Sensing (LS) hydraulics, pneumatic braking and full LED lighting. Fully equipped with control terminal and central hydraulic functions. Robust and high-capacity machine, suitable for intensive harvesting and transport of fodder. Auction-ID: A3-46162-36378

Built up; depth cabinets and drawers above 330mm; depth of cabinets and drawers under 540mm; middle drawers lockable; Auction-ID: A1-50092-98

Toro Titan Zero-Turn Ride-on Mower (Used machine) • Manufacturer: Toro • Series: Titanium • Model No.: 74889 • Serial No.: 411455386 • Machine type: Zero-turn ride-on mower • Year of construction: 2021 • Power: 12.8 kW • Weight: 371 kg • Noise level: 105 dB(A) Equipment: • Zero-turn steering via two drive levers • MyRIDE suspension system • Sprung comfort driver's seat with armrests • Front mower deck / cutting deck • Mowing height adjustment • Large rear drive wheels • Swivel front wheels • Non-slip operator platform • Cup holder Condition: • Used condition • Signs of wear and tear due to age and use • Scratches, dirt and paint abrasion visible on the mower deck • Seat and controls with signs of wear Auction-ID: A1-49586-30002

Unused, +/- 74 meters, 24x fencing 2970mm wide 2000mm high, bars 20x20mm, beams 40x40mm, 22x post 50x50mm 2650mm high, including mounting materials Auction-ID: A1-47445-45

Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-50092-223

Color: white; PVC cover 420 grams; Single truss system galvanized; unused; arch space 3.05M; in metal box; height door 3.60m; Door width 3.60m; transport box Auction-ID: A1-50092-20

Built up; depth of cabinets and drawers under 580mm; middle drawers lockable; Auction-ID: A1-50092-104

Unused; ATS; rated output 20kw/25kva; standby 22kW/28kVA; P.F. 0.8; RPM 1500; 72 liter tank; 3 PHASE; altenator type VG-184FS; Aisikai ATS 36A; Oil tank 13L; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; Frequency 50Hz; 4 cylinder; 4-Stroke; V In-line; Water Cool; Electric start Auction-ID: A1-50092-82

Unused; maximum belt diameter 1100mm; approx. 180 RPM; maximum weight 70KG; 0.25Kw; Balance period 7s; in transport crate; N.W 138; 7411 Auction-ID: A1-50092-10

Bamdura decking board 2200x143x22 mm – grey. Co-extrusion decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Gray wood look finish. Auction-ID: A1-45106-2151

Built up; depth of cabinets and drawers under 580mm; middle drawers lockable; Auction-ID: A1-50092-122

Overhang edge; safety chain; Metal ramp with spoon slots; unused; Auction-ID: A1-50092-228

Overhang edge; safety chain; Metal ramp with spoon slots; unused; Auction-ID: A1-50092-227

Bamdura decking board 2800x143x22 mm – dark grey. Solid co-extrusion decking board. Very strong, dimensionally stable and low maintenance. Resistant to moisture, UV radiation and discoloration. Suitable for terraces and intensive use. Dark gray wood look finish. Auction-ID: A1-45106-2148

Color: white; PVC cover 420 grams; Single truss system galvanized; unused; arch space 1.5M; in metal box; 420KG - Box dimensions 1920 x 740 x 560 mm Auction-ID: A1-50092-23

Unused, +/- 74 meters, 24x fencing 2970mm wide 2000mm high, bars 20x20mm, beams 40x20mm, 22x post 50x50mm 2650mm high, including mounting materials Auction-ID: A1-47445-43

unused; photos built up for illustration; in metal storage box; Please note! Color: White; 420G; PVC; Arch space 1.5M; Dimension 12000x6000x2000mm; oval arch; Single galvanized steel truss frame, renewed 451.5mm; Box dimensions 1920 x 740 x 540 mm; 7404 Auction-ID: A1-50092-22

Unused; maximum belt diameter 1100mm; approx. 180 RPM; maximum weight 70KG; 0.25Kw; Balance period 7s; in transport crate; N.W 138; 7411 Auction-ID: A1-50092-11

unused; photos built up for illustration; in metal storage box; Please note! Color: White; 420G; PVC; Arch space 2M; size 8000x6000x3000mm; oval arch; Single galvanized steel truss frame, renewed 601.8mm; 7406 Auction-ID: A1-50092-24

PVC cover 420 grams; two zippered doors at both ends; Single truss system galvanized; arch truss length 1.525M unused; in metal box; Auction-ID: A1-50092-26

PVC cover 420 grams; two zippered doors at both ends; Single truss system galvanized; unused; in metal box; 180KG - Box dimensions 1930 x 740 x 330 mm Auction-ID: A1-50092-25

Unused, +/- 74 meters, 24x fencing 2970mm wide 2000mm high, bars 20x20mm, beams 40x40mm, 22x post 50x50mm 2650mm high, including mounting materials Auction-ID: A1-47445-44

Built up; depth cabinets and drawers above 330mm; depth of cabinets and drawers under 540mm; middle drawers lockable; Auction-ID: A1-50092-106

Forklift forks 2840x160x65mm; outer dimensions tube 160x65mm; unused; 10FT; 7408 Auction-ID: A1-50092-226

High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

new all stainless steel turn table diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) adjustable speed 0,12 kW

Rotary vane vacuum pumps lubricated 2-stage Status: Rebuilt warranty: 12 months Manufacturer: Leybold Type: Trivac D16B Suction capacity: ca. 16 m³/h Discharge pressure: approx. 5x10e-3 mbar Engine: 400V DS Resources: Mineral oil Accessories: owner's manual Oil mist separator optional Delivery time: By appointment (subject to prior sale) Spare parts, equipment or alternative pump on request.; ready for operation

TO WHOM IT MAY CONCERN; WE VE 6 PCS USED WOODWARD 721 DIGITAL SPEED CONTROL AT OUR STOCK. WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL ON BELOW PART NO 8280 - 303 PART NO 9987 - 206 CTRL ASSY 8237 - 951 REV. E CTRL ASSY 8237 - 735 REV. G ALL PANES LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 Participant, with braking resistor Integrated thermistor monitoring PTC and Thermo-Click with safe separation 2 sensor inputs via M12 sockets (max. 150 mA) for quick stop and Locked manual operation optional: 4 sensor inputs with M12-Y adapter for switching to Creep speed Connection of the supply voltage via adapter cable to round or Flat cable outlet Diagnostics and reset on the device and via AS-Interface with key switch AUTO - OFF/RESET - HAND 3 fixed speeds and 1 potentiometer speed Switchable from U/f to speed control (vector) with selector switch REV - OFF - FWD

Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled

Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

Hobart high speed steamer Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

bore capacity in steel (diameter): 32 mm arm length: 410 - 1000 mm workpiece height max.: 765 mm coolant: ja boring spindle diameter: 38 mm diameter of quill: 70 mm spindle stroke: 225 mm boring spindle: MK 4 mm/min spindle turning speed - stepless: 70 - 2000 U/min feed range - spindle: 0,04 - 0,32 mm/U column diameter: 225 mm bore radius max./min: max. 1130 mm table surface area: 630 x 1320 mm height adjustment: 500 mm base plate: 1500 x 1000 mm T-slots: 4 Stück T-slot - distance: 18 mm total power requirement: 2,2 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m shift of supports: 590 mm without turntable and tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PAD 63 A high-speed press was built in 1978 in Poland by Fabryka Pras Automatycznych Warszawa-Włochy. The machine is used for precision machining of uncoiled sheet metal. All machining processes, i.e. stamping, punching, cutting and bending are performed fully automatically with a high press force of 63 tonnes. The PAD 63A high-speed press on offer has undergone an overhaul. The total weight of the machine is 6300 kg. Technical specifications of the PAD 63 A press - maximum press force: 63 t - slider stroke number: 100-320/min - slider adjustment: 60 mm - maximum distance from work table to slider surface: 320 mm - distance between columns: 480 x 400 mm - motor power: 15 kW - grease pump motor power: 0,4 kW - weight of the PAD 63 A machine: 6300 kg