special used for sale

Equipped with ridge stop,

Table length: 300 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 300 mm Vertical Z: 300 mm CNC Brand: _Unknown / Other Seperate coolant and frequency converter Last service & Test Log in 2018 Run out in 1 uM Spindle speeds:50000Rpm Spindle Taper:50ISO/Bt/Mk Length:       1200mm Width:        800mm Height:       600mm Weight:       200kg

Approx. Onsite Dimension. (l x w x h): 3,100 x 600 x 1,900 mm, weight approx.: 200 kg

Approx. Onsite Dimension. (l x w x h): 2,100 x 600 x 1,900 mm, weight approx.: 500 kg

Approx. Onsite Dimension. (l x w x h): 2,100 x 600 x 2,000 mm, weight approx.: 150 kg

Approx. Onsite Dimension. (l x w x h): 2,100 x 600 x 2,000 mm, weight approx.: 250 kg

Approx. Onsite Dimension. (l x w x h): 4,000 x 600 x 2,000 mm, weight approx.: 300 kg

Forklift front forklift in very good condition Manufacturer: Jungheinrich Year of construction: 2011 Load capacity 3.000kg Operating hours approx. 4,200 hours Triplex mast with full free lift Lifting height approx. 5m Three valves up to the mast Side shift Weight approx. 4.73 tons Construction height approx. 2250mm Total width approx. 1,300mm Turning radius approx. 2.37mm All information is provided to the best of our knowledge, but without guarantee! Year of construction: unknown

New diamond grinding wheel Dr. Wilhelm Müller Diamond metal Item No. 233722/1 D 181-KBNT-C75 Diameter 300 mm, bore 75.00 mm, width 16 mm.

Chamber Volume: 36L Connection capacity: 37 kVA Welding machine generator: 6 kW radiant power / 60 kV accelerating voltage The machine welded a shaft with a rotor to a car turbocharger. Regularly serviced by an authorized service center. Full documentation in paper/electronic version. Additional tooling for connecting the shaft to the rotor for the car turbocharger.

Block hoist before debarking, rotor passage 75 cm, lifting and lowering device, hydraulic equipment 7.5 KW, 2.2 KW Tilting tray after debarking, steel substructure made of HEB 200 and HEB160, Control cabinet with control panel

Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg

Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Table length: 1 mm Table width: 1 mm Longitudinal X: 1 mm Cross Y: 1 mm Vertical Z: 1 mm CNC Brand: Siemens Milling machineMIBA - D-KAM 80 MACH-ID 8485 Make: MIBA Type: D-KAM 80 Control: SIEMENS 840D Year: 2014

Table length: 1 mm Table width: 1 mm Longitudinal X: 1 mm Cross Y: 1 mm Vertical Z: 1 mm CNC Brand: _Unknown / Other Milling machineGraebener - GRF 45 T MACH-ID 8483 Make: Graebener Type: GRF 45 T Year: 2011 Circ seam milling machines reliable and safe preparation of circ seams at pipes, vessels and apparatuses. For this reason, they have been among the most popular seam milling machines for the preparation of seams of extremely narrow welding gaps for years. Actual usability studies give proof of cost benefits of more than 50 percent. This GRF45 machine will save you time and money since the circ seam milling machine is also suitable for a quick and reliable seam repair. Benefit from oindividual concepts and numerous advantages in comparison to conventional gouging or grinding methods. Work piece diameter min: 1000 Work piece diameter max: 7000 Milling depth 118  ...

Description: The lot consists of all residual assets present in the assigned area, an INVENTORY of the included assets can be viewed HERE ATTENTION! To participate in this auction, a deposit of €158.20 is required, which will be retained until the outcome of the contradictory verification of the status of the premises. The deposit must be paid by bank transfer to the account held by Surplex Srl. For further information: alessandro.icardi@surplex.com The lot includes the following tasks, which must be carried out in the aforementioned temporal order within 30 days from the award: The complete removal and correct disposal of NON-FERROUS materials. The complete removal and correct disposal of machinery and ferrous materials. The proper removal or scrapping of vehicles, subject to the completion of the documentation checks (currently in progress). The thorough floor cleaning of the r ...

Description: Including mobile base frame Approx. Onsite Dimension. (l x w x h): 1,300 x 700 x 1,000 mm, weight approx.: 100 kg

Approx. Onsite Dimension. (l x w x h): 1,600 x 700 x 1,550 mm, weight approx.: 250 kg

Approx. Onsite Dimension. (l x w x h): 1,600 x 700 x 1,550 mm, weight approx.: 250 kg

Approx. Onsite Dimension. (l x w x h): 1,600 x 700 x 1,550 mm, weight approx.: 250 kg

indexing:Länge = < 1050 mm table::Teilungslänge =

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION

Wraparound NOVOPAC | 2006 Year: 2006 Speed: 27 cycles / minute Model: VF 250 WR/SPECIAL Workable formats: 6/12 Preo Gluer Safety protections

Dough dividing machine, IRIS 20 Special R., Fabr.Gulliver

Type: Special 410 CSO Machine No.: 97213 Year of construction: 2012 Weight: 530 kg Dimensions LxWxH: 700x1400x1550 mm Band dimensions: 3010x27x0.9 mm Motor power: 0.9 – 1.6 kW Engine revolutions: 700 – 1420 rpm Cutting speed: 38-77 m/min Cutting capacity: see picture Cutting thickness: 1.2 mm Height of clamping jaws: 150 mm Length of jaws: 210 mm Height of the worktop: 950 mm Clamping force: 400 kg Accessories 3x Band saw blades: 3010 x 27 x 0.9 mm (Z 6/10)

Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Manufacturer: Günther, slip-on reamer, machine reamer Titex-Special -Intake: conical Ø 17 -19 mm -Diameter: 37mm -Dimension.: Ø37 x 56 mm -Weight: 0.2 kg

Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Manufacturer: Günther, slip-on reamer, machine reamer Titex-Special -Intake: conical Ø 20 -22 mm -Diameter: 47mm -Dimension.: Ø47 x 62 mm -Weight: 0.5 kg

Used Pedrazzoli SUPER BROWN SPECIAL Sheet metal machine The machine is mainly made up of: – Sheet metal pedestal. – Swivel head support ring to allow inclined cuts. – Pneumatic vice with locking handwheel equipped with anti-burr. – Machine base in cast iron. – Head with crown screw reduction. TECHNICAL DATA Three-phase motor 2 speed kW 0.75 ÷ 1.1 Blade holder shaft revolutions n/1 3 7 ÷ 7 4 Maximum blade diameter 250 mm. Minimum blade diameter 200 mm. Maximum vice opening 110 mm. Jaw height 60 mm. Refrigerant pump flow rate (m 1 head) 22 litres. Tank capacity 3 litres. Dimensions: B x H x D – 520 x 1770 x 1130 mm. Weight 150 kg

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

Semi-automatic band sawing machine. -Pneumatic clamping and feeding. -Capacity: 230 mm. -Material tarnishing. -Refrigeration. -Default. -2 Manual operation. -Height of support surface: approx. 98 cm. -Incl 2nd length stop, 200l x 59h cm. -Incl roller stand, roll width: 39 cm, size: 57w x 59d x 90h cm.

Stands on pallet.

Description IML molding plant consisting of: - Robbi robot 115 JS: mat. 10363 (on press) - Robbi robot 85 JS: mat. 10363 (finished parts palletizer) - Bank for loading labels - Conveyor belt for evacuation of finished parts

The plant is in good working condition and is immediately available

Mobile fully automatic vacuum chamber machine suitable for vacuum packing goods in solid and liquid form.

sawing cap rectangular: 400 x 200 mm sawing cap square: 280 x 280 mm sawing cap round: dia 300 mm Depth of throat: 400 mm Max height of workpiece: 280 mm Length of band saw: 3010 x 27 x 0,9 mm Weight: 530 kg

Working width: 380 mm; Working height: 200 mm; Aggregates: 2 brush units separately adjustable; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 220mm, vario-drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely adjustable); Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Description: Serial no. SX101 Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Approx. Onsite Dimension. (l x w x h): 25,000 mm, weight approx.: 7,000 x 2,000 x 1 kg

Description: Voltage 400 V Power output 18 kW Total power consumption 19400 ,W Maximum 1500 W extraction Maximum pressure 12 bar, operating pressure 10 bar Temperature at the outlet of the ,additional device 150° C, ,maximum temperature with boiler 188° C Boiler volume 2 x 4.4 l Water volume in the boiler 2.2 l Steam production approx. 30 kg/h With CE certificate Operating hours approx. 8 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,200 mm, weight approx.: 170 kg

Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...

Packaging machine Beck Series Packer S 1732 - Used equipment built in 1986 -Operational The machine is equipped with a photo-electric control and regulates the work rhythm depending on the length of the packaged goods. This allows unequal parts to be packed in any order. The height and side adjustment of the machine takes place in seconds by means of a hand wheel. Functioning The machine works cycle by cycle, fully automatically with photo-electric control. The goods to be packed are introduced into the machine by means of a special infeed belt and shrink-wrapped on four sides. Oil hydraulics ensure exact operation of the welding system. The welding is carried out according to the impulse separation welding process and can be equipped with additional special welding elements. Odour nuisances are avoided by means of an exact, infinitely variable temperature adjustment of the w ...

We offer the following positions: Doka Eurex, used, in stock at top conditions – checked and sorted 101 x used Doka Eurex 20 eco 250 for the absolute special price of 22,00€/piece 3 x stacking rack 1.55 x 0.85m, used 99,00€/pcs. 217 x used Doka Eurex 20 top 250 for the absolute special price of 24,00€/piece 6 x stacking rack 1.55 x 0.85m, used 99,00€/pcs. 83 x used Doka Eurex 20 top 300 for the absolute special price of 26,00€/piece 2 x stacking rack 1.55 x 0.85m, used 99,00€/pcs. Doka Eurex, used, in stock at top conditions – checked and sorted to be sold on behalf of a customer! 22 x used Doka Eurex 20 eco 350 for the absolute special price of 28,00€/piece 1 x stacking rack 1,55 x 0,85m, used 99,00€/pcs. 297 x used Doka Eurex 20 top 350 for the absolute special price of 32,00€/piece 8 x stacking rack 1.55 x 0.85m, used 99,00€/pcs.  ...

Seydelmann cutter 90 liter, type K 90 AC Completely made of special stainless steel 90-liter bowl made of stainless steel 2 mixing speeds 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 200 depth: 170 height: 160 Main motor power: 28 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

Rex cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 knives speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment