special used for sale

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0608DC Load capacity: 240 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.37 x 0.7 m Extendable platform + 0.60 m Transport dimensions 1.54m x 0.81 m Height: 2.19 m Railing folded down Height: 1.83 m Weight approx.: 1260 Kg Working height: 7.6 m Platform height: 5.6 m Climbing ability up to: 25 % Powered by battery 4x12V / 115 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tr ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0808NP Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 0.81 m Extendable platform + 0.90 m Transport dimensions 2.48 m x 0.82 m Height: 2.36m Railing folded down Height: 2.00 m Weight approx.: 1970 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 25% Drive via battery 4x6V / 200 Ah Integrated charger 24 V/ 36 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade fair fr ...

scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT1012 Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport Dimensions 2.48 m x 1.21 m Height: 2.48 m Railing folded down Height: 1.92 m Weight approx.: 2932 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25% Drive via battery 4x6V / 240 Ah Integrated charger 24 V/ 36 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade fair from the Bauma location. The price refers to pick-up from the Munich location. The machines can be lo ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0408DC Load capacity: 200 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.23 x 0.65 m Extendable platform + 0.60 m Transport Dimensions 1.45 m x 0.78 m Height: 2.08 m Railing folded down Height: 1.70 m Weight approx.: 900 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25% Drive via battery 4x12V / 120 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tra ...

material: Stahl Dimensions (L/W/H): verschieden mm Steel in various dimensions:Example dimensions:250x80x6000 140x120 200x180 330x79x6000 200x200 200x140 approx: 200 to 250 t available The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our business and sales conditions apply.about usmore than 400 own machines in stockover 12,000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopYou want to sell machines production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material: Stahl Dimensions (L/W/H): verschieden mm Racks made of steel for rings or flanges up to 5500 diameter The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 6 m roll diameter: 65 cm wheel diameter: 42 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . : . : . dismantled: . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibration tester for Electronic devices. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safe for Digital Media, 10 drawers, int. 500/850/1450 ext. 850x1200x1850 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heat output capacity: NA KW air volumen: NA m³/h weight of the machine ca.: NA t dimensions of the machine ca.: NA m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp. The data for this ad was  ...

Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A., workpiece diameter automatic mode: 3 - 20 mm, workpiece diameter semi-automatically: 3-32mm, workpiece length semi-automatic: 3-32mm, workpiece length: 30-150 mm, Drive power grinding spindle: 4.0 kW, Spindle speed grinding spindle: 2000 rpm,, speed of the cylindrical grinder: 1500 rpm., cutting wheel diameter: Max. 200 mm, Electrical connection: approx. 7 kW (400 V / 50 Hz), Dimensions L x W x H: 2000 x 1500 x 1500 mm, mass: approx. 1,600 kg, colour: gray RAL 7035, Dimensio ...

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bearing diameter: Ø 380 - 1030 mm weight max. in kg: 1400 kg Dimensions (L/W/H): 3000 3000 mm weight: 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corner forming machine

Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand

The AutoDoor ADxxxC is a customer-specific version with cylinder function. The stroke is precisely adapted to the machine model. This model is particularly suitable for special applications where a classic electric hoist drive is not sufficient. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrated into the product as standard. - Full safety classification according to EN ISO 13849-1 performance level PL d. - Connections are available on both sides and  ...

Dimensions (L/W/H): 6300x2000x2350 mm Weight: 1250 kg Total power requirement: 32,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deep Drilling Machine brand Buck Year of construction 2000

Key data: 62 kN

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to part ...

Key data: 1100 kN

Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

Engel Victory 1050/220 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 50 mm Spraying weight: approx. 395 g Spray pressure: 2332 bar Dosing volume: 422 cc Clamping unit : Clamping force: 220 t Spar spacing: 0x0 mm Size of the clamping plates: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: 32,609 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 4 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 12 Injection unit is wear-resistant and resistant t ...

Haitian MA1600IIS with the Hilectro V-800IS robot / hybrid machine Year of Make: 2020 Injection unit: Screw diameter: 45 mm Injection weight: 291 g Spray pressure: 1780 bar Dosing volume: 320 ccm Clamping unit : Clamping force: 160 t Spar spacing: 470x470 mm Size of the clamping plates: 700x700 mm Ejector: hydraulic Clamping unit: toggle lever Control: Keba - Touch Screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Main motor of the machine - Servo motor driven by inverter - Energy saving Central lubrication It is possible to change the screw diameter Hilectro V-800IS robot Year of Make: 2020 5-axis robot: 4 axes are driven by servo motors (electric): X, Y, Z, B (rotation) Touch control panel Robot with adapt ...

Pallet trucks, special pallet trucks for high pallets, pallet trucks, pallet jacks -Load capacity: 2000 kg -Dimension when retracted: 195 mm -Extended length: 320 mm -Fork length: 1010 mm -Fork width (outer): 665 mm -Inner fork width: 345 mm -Weight: 105 kg

Diameter van de frontplaat: 700 mm minimale/maximale buisdiameter: 300 gt; 600 mm spindelsnelheid: 50 Hz: 12/23/45/85 tpm 60 Hz: 15/28/53/102 tpm beweging van turret: 180 mm Spindel beweging: 120 mm vermogen: 3,7 kW lengte: 2215 mm breedte: 1700 mm hoogte: 1400 mm gewicht: 2800 kg

Special yarn approx. 20 rolls black, on pallet

CONTROLS   CNC controls SIEMENS 840 D SL ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 5200 kg Microfinishing machine type Microstar 284 in vertical design with 8 workpiece holders and 4 microfinishing units for machining slide and counter ring grinding. -11000 houers Workpiece spindles: 8 piecesSpeed max 2000 rpmNumber of finishing units 4 piecesmax. speed 10000 rpmmax workpiece length 160 mmLoading height 1200 mm

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz

Special set 31 pieces, 28mm system, consisting of: 1x Tool Trolley 10x Staking Bolts 10x Ball Lock Pin 3x Professional Screw Clamp, 300 x 150mm 3x Professional Screw Clamp, 300 x 200mm 2x Professional Pipe Screw Clamp 180° 2x Professional Pipe Screw Clamp 45° Material: Burnished quality steel ATTENTION Tool is designed for 25mm table top thickness. Number of 96 Lots Weight 600 kg Condition new Hole diameter 28 mm Auction-ID: A7-46642-132

Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Condition: n ...

Special set 102 pieces, 28mm system incl. tool trolley Material: Burnished quality steel Scope of delivery see pictures Number of 102 Lots Weight 320 kg Condition new Hole diameter 28 mm Dimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-46642-197

Special set 93 pieces, 28mm system incl. tool trolley Material: Burnished quality steel Scope of delivery see pictures Number 93 Lots Weight 320 kg Condition new Hole diameter 28 mm Dimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-46642-215

Special set 80 pieces, 28mm system Material: Burnished quality steel Scope of delivery see pictures Number of 80 Lots Weight 150 kg Condition new Hole diameter 28 mm Dimensions L x W x H 0.8 x 0.6 x 0.5 m Auction-ID: A7-46642-177

Special cable with 4 wires and counterpart, make Wieland Auction-ID: A1-46862-150

Yanmar AF220S Special compact diesel tractor in neat used condition. Tractor has 3-point linkage, PTO and roll bar. The reading of the hours is 1790 hours. Compact and manoeuvrable machine suitable for agriculture, horticulture, site maintenance and greenhouses. Japanese quality machine with agricultural tyres and robust diesel engine. Auction-ID: A3-43534-11959

Special Set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art.Nr. 4028397 3x Pipe Screw Clamp D28 180° – Art.Nr. 4028396 3x Pipe Screw Clamp D28 45° – Art.Nr. 4028398 3x Pipe Screw Clamp D28 300x150 – Art.Nr. 4028399 3x Pipe Screw Clamp D28 300x200 – Art.Nr. Reference 4028400 15x Ball Lock Pin D28x50 – Art.Nr. 4027663 10x Stake-out bolts D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028658 2x Stop Clamping Bracket D28 175x50x175x25 mm – Art.Nr. 4028649 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028652 2x St ...

Brake Caliper Fitting Special Socket Set KS TOOLS 150.2400, 13 Pieces, Case

Master Special Power Socket Set for Wheel Fittings KS TOOLS 515.0885, Case

Special Shock Absorber Assembly Aid Set for Shock Absorbers with Tension Stop Spring KS TOOLS 150.9545

Coordinate measuring machine. Does not turn on HS power supply ( Out of order ) Auction-ID: A1-47049-121

Technical details Manufacturer: Gostol Model: Moka Special Type: Industrial bread slicer / bread crumb grinding machine Configuration: - Top feed hopper - Internal slicing/grinding blade system - Adjustable slice thickness control - Slice count and thickness settings (Scheibenanzahl”, Scheibenstärke”) - Crumb collection section - Safety access panels - Orange protective covers - Integrated control panel Construction: Heavy-duty steel housing Application: - Bread slicing - Breadcrumb production - Dry bread grinding - Bakery waste recycling - Industrial bakery processing Dimensions: - Length: Approx. 1500 mm - Width: Approx. 900 mm - Height: Approx. 1800 mm Weight: Approx. 700 kg Condition: Used Auction-ID: A7-47053-52

Stork PMT B.V. special equipment, model: 9900, type: 3763957, year of construction: 2010, dimensions: 1850 mm x 1300 mm x 1500 mm.

indexing:Länge = < 1050 mm table::Teilungslänge =

Special Set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art.Nr. 4028397 3x Pipe Screw Clamp D28 180° – Art.Nr. 4028396 3x Pipe Screw Clamp D28 45° – Art.Nr. 4028398 3x Pipe Screw Clamp D28 300x150 – Art.Nr. 4028399 3x Pipe Screw Clamp D28 300x200 – Art.Nr. Reference 4028400 15x Ball Lock Pin D28x50 – Art.Nr. 4027663 10x Stake-out bolts D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028658 2x Stop Clamping Bracket D28 175x50x175x25 mm – Art.Nr. 4028649 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028652 2x St ...

Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Condition: n ...