spark used for sale

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 310 kVA Prime power, Spark arresting silencer; Gross weight [kg]: 4103; Engine: Perkins 1706J-E93TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 667

EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 200 kVA Prime power, Spark arresting silencer; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 822

Tank dimensions: 1000x600x375 mm Working table: 650x400 mm Permissible weight on the table: 1100 kgs Travels (X,Y,Z): 500x300x200 mm Electrode weight: 250 kgs Generator: S2000-60 Power: 9 Kw Equipped with: POLY-SPARK

Ingot contactor, DC contactor, contactor, DC switch, Contactor, Circuit breaker, High voltage switch ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: NC Main contacts Design: open mounted on bars Drive: AC + sheet magnetic circuit + rectifier + economy resistor Drive Rated voltage: 220-230 V / 50-60 Hz Main contact Rated current: 63 A Main contact Rated voltage: 1500 VDC Number of main contacts NO contacts: 0 Number of main contacts NC: 3 Number of auxiliary contacts: 1 NC + 1 normally open + 1 changeover auxiliary contact Rated current: 6 A - Main contacts with deion chambers for fast spark extinguishing Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used but in very good condition; used

grinding diameter max.: 130 mm regulating wheel width: 250 mm max. width of grinding wheel: 250 mm Control: Siemens Sinumerik 3 total power requirement: 35 kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: m max.workpiece length for plunge-cut grinding 250 mm max.workpiece length for throughfeed grinding 300 mm grinding wheel size: diam. x width 600 x 250 mm regulating wheel size: diam. x width 350 x 250 mm grinding speed 35 / 45 / 60 m/sec. regulating wheel speed stfl. 8- 100 rpm (360 rpm) control wheel slide swivels + 2 to - 7° grinding wheel drive 22 kW total drive 35 kW equipped with: - Standard version with double bearing mounted grinding spindle and control spindle. - SIEMENS CNC control type Sinumerik 3 for control of all feeds, speeds and dressing programs. For rapid traverse approach, roughing, finishing, fine finishing and spark out, all feed and time  ...

Available in stock 2 x Used Capstone Ignition Exciters. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Spark Rate: 5.5 +/- 1.0 SPS Dute cycle: 30 seconds ON: 5 min off Input: 10-30 VDC

Device type extraction system Make TEKA Type filtoo IFA-tested incl. BGIA Certificate Supply voltage 1 x 230 volts separation efficiency > 99 % for steel and stainless steel, high-alloy steels, W3 approval fan volume flow 2,500 m³/h Motor power 1.1 kW Version mobile workshop device with extraction arm, 3 meters long in hose design Dimensions L x W x H 580 x 580 x 900 mm Noise level approx. 68 dB(A) Weight 80 kg Age 12 months Condition like new Warranty 24 months from date of delivery Total price 1.325,00 € + VAT from stock Munich incl. Spark protection STAVO ______________________________________________________________________ ______________ Coarse filter, 1 piece 10,70 € + VAT 10 pieces 79,00 € + VAT Pre-filter 1 piece 80,00 € + VAT Activated carbon filter 1 piece 71,00 € + VAT Main filter 1 piece 2 ...

volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...

Inv. Num. : 6762 Type: WHN 9 B Producer: TOS Created: 1975 Parameters: Repair history: 30.8.2021: Repair of the rotary table 31.5.2021: Repair of the lubrication system for guide surfaces 18.02.2021: Adjustment of the rotary table coupling 22.10.2020: Replacement of the sealing elements of the hydraulic cylinder of the tool clamping Replacement of the tool support bearings Replacement of hydraulic hoses for tool clamping 21.10.2019: Replacement of the electromagnetic clutch 09.10.2019: Brush holder - carbon 31.1.2017: adapted quick-shift clutches with replaced spark plugs and shift knobs on the "Y" axle 11.03.2017: Lockshift clutch

AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a  ...

table length: 850 mm table width: 550 mm ampere: 70 A control: CNC MITSUBISHI 32bit axis stroke (X,Y,Z): 550 / 850 / 450 mm weight of the machine ca.: 6 t dimensions of the machine ca.: 2,4 x 2,65 x 2,68 m Spark Erosion Machine / Cavity Sinking EDM Machine The machine is in a very good condition. Equipment / Eccessories: - Y-travel at electrode change and loading position: 1180 mm - integrated C-axis working head speed adjustable: 10/20 rpm - integrated C-axis / working head measuring resolution: 0.001 mm - load capacity without changer: 50 kg - load capacity with changer: 10 kg - max. head load: 200 kg - max. distance tool carrier plate to work table: 585 cm - min. distance tool carrier plate to work table: 125 mm - working tank: - lifting tank dimensions (W x D x H ): 800 x 1100 x 480 mm - dielectric height programmable/automatic: 440 mm - filter cartridge version: cartridges integr ...

We offer an automatic system for polymer coating as a complete system. The individual purchase of components is also possible. For more detailed information, please feel free to contact me. Among other things, the following components are available for sale: - Robots from Motoman / Yaskawa: S8Q554-1-1, S8 Q553-1-3, S7M 744-1-2 - Component preheating of Glasbeek Finish BV: 105-Z3100 23KW - Various diaphragm pumps, storage tanks, lifting sinking stations for primer preparation from Krautzberger - 2x instantaneous water heater from DETE GmbH: Vulkan 35 - 2x control unit type : OptiStar CG0 from ITW Gema - Extraction walls from ITW Gema and Krautzberger - Spark detection BM20, BZ20 from STS fire protection systems

Ingot contactor, spark chamber, Arc Chutes BBC, PETERCEM R 420 FPTN 401931 R1 New ! Dimensions: 200 x 180 x 60 mm

Ignition electrode, spark plug, 2 pieces KÄRCHER 5.826-024 spare parts set: Part no. 2.880-190 for HDS 1200 up to factory no. 2681 for HDS 3000 ex works no. 411 Manufacturer of electrodes: BERU New ! Dimensions ( packaging ): 210 x 145 x 20 mm

Key data: 1400 KW, 1800 kVA, 400 V

MWM Power Generator TBG620-V16K Gas generator set from 2001, Scope of delivery: base frame and generator, as shown. Engine turns, intercooler, turbocharger, starter, ignition coils, spark plugs are missing. 1 available 1,365 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I734G2 CG, 1,800 KVA Gas engine MWM TBG620-V16K Manufacturer: MWM Model No.: TBG620-V16K Type: Gas generator set Serial Number: 2203129 Power [KW]: 1.400 Year of construction: 2001 Hours:– Weight [kg]: 8.588 Dimensions LxWxH [cm]: 470×145 AC generator Stamford HC I734G2 CG Manafacture: Stamford Model: HC I734G2 CG Type: AC Synchronous Generator Serial Number: 00366141 Power [KVA]: 1,800 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.598 Speed [1/min]: 1,500 Year of construction: 2001 Weight [kg]: 3.700

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Extinguishing chamber for bar contactor, spark chamber, Arc Chutes BBC, CEM R 550 FPTN 401932 R1 New ! Dimensions: 260 x 190 x 70 mm

Phenix RS LT CUT 2040 plasma cutting machine With POWERMAX 125 GENERATOR Hypertherm Plasma Torch - Set Harnesses, Hypertherm cables and voltage divider board - Altitude control feeler and Hypertherm anti-collision - Mechanically welded machine frame, rectified on machining center - Machine frame with 4 PANASONIC Motors / Brushless encoder 15003000 Double motorization in X - Automatic game catch-up between rack and pinion - Precision gearbox, guides and racks - Smoke suction trays compartmentalized - Removable slag collection trays by the side - Electrical cabinet - PHENIX Numerical Control TECHNOLOGY - Industrial PC -Laser pointer - 3 axis wired joystick -Pneumatic dot peen marker - Central suction and filtration of smoke EASY 3 7.5 KW -Pre separator (spark trap)

Laser working ranges: Carbon steel: 0.5mm - 20mm Stainless steel: 0.5mm - 15mm Aluminum: 0.5mm - 10mm Power: 3200W Year of manufacture: 2007 Working space: 3000x1500 [mm] Laser working time (07.12.2022): 72112 h Beam working time (07/12/2022): 41618 h Along with the machine, cooling system, heat exchanger and spark separator, the installation of resonator gases (carbon dioxide, nitrogen, helium) is attached.

: neu : ca. 6 Monate ab Auftragse : 148100 € : 2947.19 € : 730 mm : 1200 x 600 mm : 1200 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,001 - 0,04 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis &, alarm display Max. table speed (X axis) 30 m ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111210 € : 2213.08 € : 730 mm : 1.200 x 500 mm : 1200 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 560 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 560 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm Max. table speed (X axis) 30 m/min vertical feed by ...

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

CELL COMPOSED OF: 2 MULTICONTACT GRINDING UNITS WITH 3 BELTS fully automatic with intelligent system, capable of maintaining the programmed working pressure constant. 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 2 KAWASAKI RS50N ROBOTS each having a wrist capacity of 50 kg. Each robot is complete with: _ANTI-SPARK PROTECTION on the wrist; _TICKET INSPECTOR; _PNEUMATIC SYSTEM.

amount: 1 STK height: 450 mm external diameter: 340 mm Filter cartridge/3-5µm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil filter element Mann filter element for oil of the highest quality for wire erosion, die sinking and spark erosion drilling. The Mann + Hummel H 34 2240/40 KIT oil filter element reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers protection and is used for the filtration of engine, hydraulic and gear oil. Technical data Height: 450 mm Outer diameter: 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Working range / cutting width approx. 2500 mm - Working range / cutting length at approx. 8 m - Control BACH type MyBach - Track gauge approx. 2850 mm - Plasma torch with height adjustment - Plasma source KJELLBERG Hi FOCUS 280 i Plus - Cutting current at 100% ED 10 - 280 A - Cutting range steel approx. 5 - 60 mm - Cutting range aluminium approx. 5 - 30 mm - Cutting range stainless steel approx. 5 - 30 mm -Auto. Gas console - Connection 400 V - Extraction table with extraction system TEKA 12 x 2 m - Extraction system TEKA FC 4 H with spark separator - Weight approx. 8 T

x-axis: 2000 mm y-axis: 1500 mm z-axis: 750 mm burner heads: 1 3 D laser capacity in Watt: 2700 3D laser cutting and welding system TruLaser Cell 7020 Machine no. A0421A0099 Type: L13 standard equipment - X = 2000, Z = 750mm, B = +/- 135°, C = n x 360° - Laser TruFlow 2700 - Position laser diode - Stationary, rotatable pendant control panel - Teach panel - Teach software - Magnetic clutch, head detection - Laser power control - Power Cycles - Logbook function - focus line - Nitrogen jet aeration - Network connection including installation via teleservice - Analog modem for teleservice - Lighting boom - Documentation twice Deviating from this standard equipment or in addition the machine TruLaser Cell 7020 is equipped with: With the following configuration: Frequency 50Hz Voltage 400 V0 Electrical regulation IEC Language operating instructions German Number of operating instructions 2 p ...

Comments: Following Major Parts of LB have been exchanged or overhauled: Cylinderheads – NEW; Camshaft follower – NEW; Crankshaft – used with Main Bearings – NEW; Piston cpl., Liner, Scraper Ring – NEW; Conrod and Bearing – NEW; Camshaft and Bearing – NEW; Actuator – NEW; Turbo Bypass Valve – NEW; Vibration Damper - NEW; Pre Chamber Gas Valves – NEW; Spark Plugs – NEW; Turbo Charger – Overhauled; Intercooler – Overhauled. Missing on Longblock – Ignition Rail Item Code: 1111043 Scope: Longblock manufacturer: Jenbacher Engine Type: J Engine Serie: 620 Gas Type: Natural Gas Design No: F040 Eng Ser No: 5650841 Orig PoOutput kWm: 3119 YoM: 2009 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Following Major Parts of LB have been exchanged or overhauled: Cylinderheads – NEW; Camshaft follower – NEW; Crankshaft – used with Main Bearings – NEW; Piston cpl., Liner, Scraper Ring – NEW; Conrod and Bearing – NEW; Camshaft and Bearing – NEW; Actuator – NEW; Turbo Bypass Valve – NEW; Vibration Damper - NEW; Pre Chamber Gas Valves – NEW; Spark Plugs – NEW; Turbo Charger – Overhauled; Intercooler – Overhauled. Missing on Longblock – Ignition Rail Item Code: 1111042 Scope: Longblock manufacturer: Jenbacher Engine Type: J Engine Serie: 620 Gas Type: Natural Gas Design No: F040 Eng Ser No: 5649831 Orig PoOutput kWm: 3119 YoM: 2009 powerup.at - Technology is our drive. Efficiency our focus.

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Additional information: Filter cartridge/3-5μm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER oil filter element, Mann Filter filter element for oil with the highest quality for wire erosion, sinking erosion and spark erosion drilling. The Mann + Hummel oil filter element H 34 2240/40 KIT reliably removes dirt and solid particles such as dust, metal abrasion, oil, carbon, soot, etc. It offers optimal protection and is used to filter engine, hydraulic and transmission oil. Technical data: Height: 450 mm External diameter: 340 mm weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 350 x 350 x 490 mm

Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. outside marbled 4.500 liters UNI-DACH Measurement and Weight: Total Height: 2900 mm Cyl. Height: 2000 mm Diameter: 1750 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: - with manhole round DN 500 with hanger - with 2 cran eyes - with thread connection 2 x DN 25 and 1 x DN 65 - with CIP spray head Cylinder tank: - ladder hook - with sample valve - with level indicator with bar and scale - with temperature indicator analog - with thread connection DN 80 Lower bottom: - with conical bottom - with forward pulled outlet pipe with butterfly valve DN 50 - with 4 calotte feet height adjustable

Sparkling Pressure Tank / Steel Pressure Tank Storage Tank / Pressure Tank with red food safe munkadur coating, HORIZONTAL with new KIESELMANN Sparkling pressure fitting Operating pressure 8 bar Volume: 5.000 Litres Measurement and Weight: Total Length: 2800 mm Cyl. Length: 2045 mm Diameter: 1600 mm Weight: approx. 1220 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10+50°C Tank lining: EMS 277 Inspection book, Documentation available Tank-Description Container with torispherical bottoms. Bottoms 8 mm wall thickness, jacket wall thickness 8 mm. Top of the tank: • with 1 flange DN 25 Tank body: • with forward drawn manhole oval front 440 x 350 mm swiveling with holder • with new KIESELMANN Sparkling pressure fitting with manome ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank with red food safe munkadur coating with cooling jacket and with isolation With new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 8.000 Litre Measurement and Weight: Total Height: 4900 mm Tank Body Height: 3625 mm Diameter: 1900 mm Weight: 2100 kg Uni 4850 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10 +40 °C Year of construction: 2000 Lining: Akorrosit EL 15 p” On cylindrical part two cooling jacket, test pressure 2 bar, depressurizes, 5,8 m2 cooling surface Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 8 mm wall thickness. Container outside completely isolated with ...

Sparkling Pressure Tank / Champagne cooling tank / Storage Tank/ Pressure Tank Overpressure 8 bar, STANDING With new KIESELMANN sparkling pressure fitting Volume: 10.000 Litres Measurement and Weight: Total Height: 3220 mm Cyl.Height. 2050 mm Diameter: 2200 mm Weight: approx. 2250 kg Uni 3950 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature : 20°C Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms 12 mm wall thickness and jacket 10 mm wall thickness. Tank upper body: · filling connection DN 50 central in the top · 2 crane eyelets · Flange connection NW 40 · 1 Block flange NW 20 Tank front: · with manhole oval 450 x 350 mm swivelling with holder · with new KIESELMANN sparkling pressure fitting up to 10 bar with manometer, with overpressure s ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...

Storage tank for wine, beer, sparkling wine, water, fruit juices, oil etc. approx. 4.700 liters used – in very good condition Measurement and Weight: Total Height 2650 mm Cyl. Height: 2000 mm Diameter: 1750 mm Material: V2A - AISI 304, 1.4301 Surface: outside marbled 2B=IIIC Tank upper body: with hinged cover 50% with handle with thread connection DN 50 with 3 cran eyes Tank cylinder: with 2 x handle for mounting with thread connection DN 50 with butterfly valve DN 50 Lower bottom: with rest outlet with butterfly valve DN 50 drawn to the front with 3 calotte feet with variable height

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Distance between centres: 4000 mm grinding diameter: 630 mm Max. Longitudinal travel: 4450 mm Grinding wheel: Diameter: 750 mm Width: 100 mm Bore: 305 mm grinding wheel width: 125 mm Workpiece weight on centres max.: 2500 kg Grinding wheel speeds: number (steps): 2 from: 840 rpm up to: 970 rpm Angular displacement: -10 / +30 ° Duration of sparking out: 0 - 60 sec Work piece spindle head: speeds: number (steps) from: 435 rpm up to: 2800 rpm Swivelling range: +90 ° Table angular displacement: 4 ° Table speed: stepless from: 0.05 m/min up to: 3.6 m/min Voltage 50 Hz 3x: 400 Volt Total power required: 31 kVA Machine´s weight about: 17400 kg Overall dimensions machine: Length: 12000 mm Width: 3360 mm Various accessories: Coolant system Steady

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Max. Longitudinal travel: 320 mm Grinding wheel: Grinding weehl left side: Diameter: 400 mm Width: 25 mm Bore: 127 mm Max. grinding diameter: 198 mm Workpiece weight on centres max.: 60 kg Grinding wheel speeds: number (steps): 3 Peripheral speed: 32 m/s Work piece spindle head: Spindle taper:: 4 MT Taper in tailstock:: 3 MT Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor: 3 kW Machine´s weight about: 1500 kg Various accessories: Internal grinding attachment swivellable: Spindle speeds: 22000 rpm Swivellable redressing device Rayon redressing device Sparking-out attachment Set of collets

• Filler 36 valves VIRMAURI mod. MUTINA – isobaric: • Year: 1997 • Producer: VIRMAURI • Speed (BPH): 5.000 bph • Direction: Clockwise • Used filler VIRMAURI 36 valvole - isobaric. • Speed: • 4.000 bph for sparkling and 5.000 bph on still wine. • Code T 33

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: CNC E 34 Technical data Centre height: 100 mm Distance between centres: 430 mm Max. grinding diameter: 198 mm Grinding length: 400 mm Workpiece weight on centres max.: 100 kg Grinding wheel: Diameter: 500 mm Width: 180 mm Bore: 203.2 mm Grinding wheel speeds: Peripheral speed: 45 m/s Cross travel CNC: 340 mm Feed speed up: 0.1-8000 mm/min Longitudinal slide: Max. travel: 340 mm Max. grinding length: 400 mm Resolution: 0.0001 mm Transversal slide: Max. travel: 480 mm Resolution: 0.0001 mm Work piece spindle head: speeds: stepless from: 20 rpm up to: 1000 rpm rotatable: +30/-45 ° C axis taper in spindle: MT: 5 Taper in tailstock:: 3 MT Tailstock travel of barrel: 20 mm Table speed: stepless from: 0 m/min up to: 8 m/min Max. table angular displacement: +/-9 ° Voltage 50 Hz 3x: ...

• Filling machine VIRMAURI 42 valves isobaric – 5.000 bph: • Year: 1989 • Producer: VIRMAURI • Speed (BPH): 5.000 bph • Direction: Clockwise • Machine suitable for sparkling wine • 42 valves. • Carousel isobaric with 42 valves. • Valves with decompression and autolevel system • Code T 6

• Heating tunnel INFID: • Year: 2009 • Producer: INFID • Speed (BPH): 7.000 bph • Used Heating tunnel INFID composed of: • 8.5 m2 internal heating tunnel. • No. 2 centrifugal pump for hot water recirculation. • No. 2 recovery tanks with water heating by steam. • Suitable for heating approximately 7,000 bph of 0.750 liters of sparkling wine. • Dimensions: - Length 5,500 mm X width 2,800 mm. • All in stainless steel. • 2-way belt for bottle entry. • 3-way output belt. • Safety protections. • Code Y 10