spare used for sale

spare parts - cook bolinders - glue application with gluing combs Ccmealplm For adhesive application on compact wedge zinc systems (compact wedge zinc machine ) Praezisions glue comb system with working width max. 250 mm, 2 tine laenia 15 mm or alternatively 20 mm

spare parts - dimter application with 2 rollers Glue with 2 glue rolls 270 mm; guide from above; Aggregate not yet overdone, behaelter can be found;

spare parts - cook bolinders - bottom drive roll Feed roller below Cmtajuaa 2 Stueck Inlet, D = 147 mm; L = 233 mm; d = 35 mm Inlet, D = 145 mm; L = 240 mm; d = 35 mm Plate 2.2, No. 3

WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS

DISPONIBLE MENY SPARE PARTS FOR BRAND SSM OR MENEGATTO

MAK M20 Spares for sale. 1.Reusable Cyl Heads Bare-Pressure Tested Free From Crack:8-10 2.Piston With Groove With in Limit:8-10 3.Con Rod-Free From Crack, Wear Within Limit:8-10 4.Fuel Pump-Good Condition:8-10 5.Reusable Liners Wear Below 0.20mm-Free From Crack, Welding or any Damages:8-10 6.L O Filter-Good Condition:2 7.Water Pump-Good Condition:1 8.Lube oil Pump-Good Condition:1 9.Turbo Charger K54-Good Condition:2 10.STD Condition 6M20 Crankshaft, Within Std Limits, no Crack, no Ovality , Hardness Within Limits:1 11.Cam Shaft 6M20-Good Condition:2 12.Woodward UG-8 - Good Condition:2 13.6M20 Engine Block-Good Condition:1 14.Cam Shaft Gear & Crankshaft Gear-Good Condition:2 15.FLY Wheel-Good Condition 6M20:1 16.After Cooler-Good Condition 6M20:1

Infeed / Outfeed device

Press cylinder 12 to

COOK-BOLINDERS Inlet top, left thread, L 260 mm 2 Stueck Plate 4.3, No. 12 (L)

Clamping cylinder suitable for wedge tine press

for clock presses hydraulic up to 25 tons for hydraulic dimmed clock press

D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83

D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83

We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines

Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold

Refer to code 1080 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1081 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1082 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixer N.M. Holiness B.V.. spare parts Second-hand machine You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine is in perfect running conditions and well maintened as worked very few hours (less than 1000h). The complete lot include everything necessary to run the machine along with all perifericals and large set of spare parts for the machine. Machine is fully operational and can be visited for a test and inspection. Lot composition: 1.- Nova Jet Cleaning System for stripping rotary nickel screens. Specifications: • • Max screen lenght 3200mm Rapports available 640mm, 819mm, 914mm y 1014mm (inner brushes for all sizes, most of them new as never been used) Included with Stripping machine • Oil cooler MCO-7OB de 7kw. • Inverter ABB de 55kw • Stripping control unit. 2.- Nova Ironing machine to iron screens after stripping. Specifications: • Ma ...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Used Wine Filling Line 2000 Complete line for still wine filling consisting of the following machines Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002 It reaches speeds of 6000 BPH for the 0 75 lt format In addition to that it works formats such as bottles of 0 375 0 75 and 1 50 This used depalletizer is supplied with all its accident prevention protections and also the user manuals The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine Instead there are spare parts available Measurements Length 2950 mm Width 2133 mm Height 2530 mm Weight 1550 kg Volt consumption 380 Kw 2 Hz 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti and it is an Oceanic 16 16 4 model It works with the same formats from 0 375 0 750 1 500 at a speed of 3800 BPH The ...

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Profile Projector ISOMA M 108 A / Suisse manufacturer: ISOMA type: M 108 A mach.-Nr.: 866477 comm.-Nr.: 0202/050/130/0382 stock-Nr.: 1835 + Regular Price: 4.680,- € > Reduced Price: 2.340,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) screen width: 550 mm screen height: 450 mm object table length: 170 mm object table width: 150 mm travel legth: 40 mm travel width: 15 mm glas table Ø: 85 mm voltage: 220 V / 50 Hz weight: 280 kg standing area: W 1.000 x D 800 x H 1.800 features Screen Size W 550 x H 450 mm object glas table insert vertical sled table micrometer spindle for legth and  ...

We offer mostly new Tetra Pak spare parts -> We will send you our list on request - New Tetra Pak ® spare parts for TBA 8, TBA 3, A3 flex, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... In the list -> Sent on request you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 A3 flex PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) TBA 3 Tetra Pak Homogenizer ... Intermediate sale reserved

ROLLER TABLE BLASTING SYSTEM MANUFACTURER: WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting machining of profiles and sheets Manufacturer: Wheelabrator Berger Type: CRC 400x300 Throughput width: 400mm Throughput height: 300mm Centrifugal wheel: 4 pieces x 4 kW frequency controlled Inlet roller conveyor: approx. 6,000mm Discharge roller coaster: approx. 6,000mm Incl. blow-off station, control cabinet, etc. TOP CONDITION ROLLER BLAST MACHINE BRAND : WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting processing of profiles and sheets. Brand: Wheelabrator Berger Type: CRC 400x300 Inlet Width: 400mm Inlet High: 300mm Wheels: 4 x 4,0kW with Drivers Inlet roll table: ca.6.000mm Outlet roll table: approx. 6.000mm Blowstation: YES Incld. Main Panel., Very good condition! Price: Loading on truck .-€ Price: Loading on Truck .-€ Warranty: 6 months f ...

Turning center USC 11, Emag – used - : Price from location: 29.500.-€ (net), plus dismantling etc.! System designation turning center USC 11 Manufacturer: EMAG Year of construction: 2006 Available: now Condition: good - very good Location: Hamburg area Technical data of the machine: Current Chuck passage max 160 mm X-travel 300 mm Z-travel 300 mm Main spindle bore 180 mm maximum speed 2000 rpm Motor main drive 80KW full power from spindle speed 500 rpm Feed rapid traverse speed. in X 35 m/min Feed rapid traverse speed. in Z 35 m/min Maximum power for X and Z 4.1 KW Maximum torque for X and Z 13 KW Operating voltage 400 V Control voltage - DC 24 V AC 230 V Frequency 50 Hz Connected load 130 KW Supply fuse 250 A Weight approx. 20,000 kg Description of the plant components: Machine bed length 3000 mm Cross slide 2-axle Motor lockers: frequency-con ...

Spare part for HEIDELBERG OHT | Original Heidelberg Crucible Protection for V-belt drive Sparepart for HEIDELBERG OHT | Original Heidelberg platen Protective cover for V-belt drive Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The spare part is sold as it goes and stands. We sell the spare part "as is", no warrenty, no guaranty. We don't take the goods back. Price from location: 15370 Fredersdorf near Berlin - transport costs on request. Price is LOT. Shipping is not included.

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts! Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

Digi-Fold Nagel Serial: 120481 Include Operating manual and spare part list No working condition / For spare parts or repairing if invoiced in Germany + 19 % VAT Spare parts carrier / Non-functional

Woller width: 2500mm, product width: 2200mm, with fabric centering, spare scraper sets (24 rollers) and other spare parts, a second machine is available as a source of spare parts.

Unused, soundproofed, rollable, diesel generator set built in 2023 with key start Manufacturer: PLUS POWER Type GF2-6 - Electric Start Power 7 kVA 5,5KW Year of construction 2023 Hours 0 Engine 1 cyl, diesel with starter and battery, very economical! Key Start Generator 3 phase, 220/380V, 9.5A, 50Hz, Soundproofed incl. spare fuel filter, air filter and heavy-duty rollers. Dimensions width approx. xxcm, depth approx. xxcm, height approx. xxcm, weight approx. xxkg. Unused, immediately available. The device must be filled with engine oil before it can be put into operation! Incl. spare air filter, spare fuel filter, heavy-duty rollers, hopper. Imported by: MEDIAMQ OP VALENCIA S.L. C/ Bonaire 4 46389 Turis (Valencia) Spain Sale price

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

Total Volume : 745 liter Batch size : 65 – 500 liter It is useful for hair dye, cream etc in cosmetic industry. It is an automatic multi-purpose mixer with 500 liter capacity. it is a complex machine that offers a special solution for manufacturers who want to manufacture uniform with special homogenizer, special design scrapers and high speed. The maintenance has been done and no problem in operation. The machine has never used new original spare parts with a value of over eur 20,000. spare parts; packing felt vacuum ball mixer tungsten carbide shaft bearings oring and gaskets bearing sets boiler scrapers triger belt set selenoid valve thermocouple sensor kit plc eeprom card vacuum module temperature manometer tank replacement of gliser / also, the system will be given with all the equipment and spare boilers including the photo. mil handle miscellaneo ...

Trane CHHT0M4TKA0N092A 289.9 kW Screw Compressor | ChillerTech - Original Spare Parts Reliability and honesty! Genuine spare parts for Trane equipment in the cooling capacity range (Qch) from 1 kW to up to +1800 kW are a guarantee of satisfaction and safety. Taking into account the access to unlimited possibilities and even a storage area of +3500 m2, it is the best choice in terms of, m.in, screw, reciprocating, centrifugal and even scroll compressors. It is worth mentioning that as ChillerTech, we provide assistance in the field of service and repair of the above-mentioned devices throughout Poland, so you do not have to worry about possible downtime, problems or even damage. It's an investment for years! A Trane CHHT0M4TKA0N092A screw compressor with a cooling capacity of 289.9 kW under nominal conditions (according to the supplier) enables us to operate highly efficiently as w ...

Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine How to build one isobaric triblock The isobaric filler c ...

Used flash pasteurizer FH4000 2000L h The Used flash pasteurizer FH4000 2000L h produced in 2019 by UDMACHINES represents an advanced heat treatment system used mainly in the bottling industry Main features The Used flash pasteurizer FH4000 with an operating capacity of 2000L per hour has been designed to guarantee optimal performance and reliability over time The ability to reach temperatures of 95 C in a four stage system is particularly impressive especially considering the 1 L h water consumption reduction feature The overall weight of 2000 kg is a testament to the robustness and durability of the machine while the integrated safety features ensure safe and regulatory compliant use Technical details 1 Pasteurizer 1800 2000 lt h equipped with control panel automatic cleaning alarm detection for unpasteurized product electronic data system suitable for egg production The temperatures o ...

Supplier-immersed car spare parts from warehouse dissolution, for export, cheap to hand over. Years built from 1988 to 1995 various brands, such as Audi, VW, BMW, Ford, Opel, Seat, Fiat, Mitsubishi, Toyota, etc. Various car spare parts, such as struts, axle legs, motors, gearboxes, etc. Prices and quantities on request.

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

FOR SALE S.E.M.T. PIELSTICK PC3. 0 NEW ORIGINAL SPARE PARTS HAVE A GDY SIR WE VE BELOW LISTED NEW ORIGINAL SPARE PARTS OF S.E.M.T PIELSTICK PC3 AT OUR STOCK IN TURKEY. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. MAIN BEARING SHELLS STD 2 PAIRS THRUST BEARINGS 1 PAIRS LINER ORING 50PCS CON ROD BOLT 3 PC CON ROD BUSH 3 PCS BARREL PLUNGER 4 PCS PISTON RING KIT H 12 SET VARIOUS PISTON RING 93PCS PCS PISTON PIN RING 20 PCS GASKET OF CYLINDER HEAD KIT 3 PCS EXHAUST VALVE 5 PCS ENJEKTOR LONG SPRING 15 PCS ENJECKTOR SHORT SPRING 12 PCS ENJECTOR NUT 4 PCS ENJECTOR NOZZEL 15 PCS ENJECTOR DELIVERY VALVE 25 PCS LOCATING PIN 16 PCS . Capt. Ayhan Ugurlubay Best of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

The synchronous generator Flash 2500 S is in good condition, ready to use. Built in approximately 1997 Weight 36 kg 230 V, 50 Hz, 9.7 A 2 kVA 3000 min IP 23 Altitude 100 m above sea level. NN Ambient temperature 27 � C Radio interference level DIN 57875 spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

-only control (Similar to Fig.) This control only as spare parts carrier is sold due to age. Axles: 6 Control: S4 Type: IRB1400 M94A Load: 5 kg range: 1440 mm Accessories: manual control unit, set of cables Condition: Used, good condition. This control only as spare parts carrier is sold due to age.

Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency tin: INnen sechskant Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12