spare used for sale

Syringe pump Altek Hydraulic motor OMR50 Spray pressure 1 -10 bar Storage pressure 4 6 bar 4 pick-up points with rubber buffer

Used Ultimax 3 tft monitors with frame (see pictures)

Ersatzteil, Repair Kit GRACO (WALTHER PILOT) 221156 New ! Dimensions (packaging): 260 x 210 x 40 mm

Ersatzteil, Repair Kit GRACO (WALTHER PILOT) 222101 New ! Dimensions (packaging): 260 x 210 x 40 mm

turret of a Boehringer lathe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill quill, round rack, rack, quill for drill, bench drill, column drill, pillar drill, pillar drill, box column drill, tapping machine, tapping machine -Drilling quill: round rack -Recording: -Dimensions: see photos / techn. Drawing with dimensions -Dimension: Ø 62 x 267 mm -Weight: 4.3kg

Table milling machine, table milling machine -Spindle: comes from a Lubimez bench milling machine -Table milling machine: with rigid spindle -Dimensions: 800/800/H400 mm -Weight: 95 kg

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Dimensions: 79 x 19 mm -Lengths: 2x 1055 mm -Hole spacing: 50/238 mm -Bore: 17 mm countersunk -Price: complete -Weight: 24 kg

unknow A9020411 (12-14)-

Operator Panel

Cutler Hammer Panel Mate Power Pro PGGLOBL1701DPRO 1785T 91-01759-04 Dimensions approx. 26.5 cm Wide, 19.5 cm high and 10.5 cm deep Shipping : 7,90 with Hermes VAT not deductible

Type: RS 160 - center height: 140 mm - spindle thru-hole: 40 mm - alowable work diameter: 160 mm

We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;

Three-jaw chuck Röhm, type Duro, 200 mm, holder 4 x M12, passage 52 mm, Centering cone 105 mm, Height without jaws 97 mm, The three-jaw chuck is in very good condition. Original price:2500,-€

Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

Control CNC 432 Ref. 4022 226 4280 D 004594

Platform load: 350 kg/m² Year of construction: 2005 Location: Cologne

Description: Control Unit BOGE Ratiotronik Approx. Onsite Dimension. (l x w x h): 350 x 150 x 40 mm, weight approx.: 1 kg

Description: New list price: approx. 30.000,00€ Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 400 mm, weight approx.: 80 kg

1 batch of circlips for outside and inside, 1 lot of cylindrical pins and taper pins, approx. 30 kg 1 lot of oil seals

MAN 28/32H spares available: MAN 28/32H 15 pcs cylinder heads with std sized exh seat bores free of cracks and weldings MAN 28/32H pistons 10 pcs std sized ring grooves free of cracks and weldings MAN 28/32H connecting rods 5 pcs free of ovality and cracks MAN 28/32H water jackets 8 pcs From our istanbul stock Please contact us at infofin-marine

various accessories / spare parts for Tornos AS 14

spare parts - cook bolinders - pinch roll pivot arm - infeed bottom Feed swivel bracket bottom (front) made of ST Plate 2.2 No. 54

spare parts - dimter press cylinder for cycle press PN 25 H Press cylinder for hydraulic clock press 20 + 25 to

spare parts - cook bolinders - top clamp Clamping shoe eneerone Plate 3.1B, No. 20

spare parts - cook bolinders - Hydraulic cylinder PRESSING Hydraulic cylinder pressEN

finger jointing spare parts - GRECON Glue application system Glue system compl. Drive plate with Glue and dosing roller L=270 mm (300 possible) 2 Stueck

spare parts - cook bolinders - Cutter hood in steel execution Fraeshaube steel-exposure old glue system Plate 4.1C, No.

spare parts - cook bolinders - glue application with gluing combs Ccmealplm For adhesive application on compact wedge zinc systems (compact wedge zinc machine ) Praezisions glue comb system with working width max. 250 mm, 2 tine laenia 15 mm or alternatively 20 mm

spare parts - dimter application with 2 rollers Glue with 2 glue rolls 270 mm; guide from above; Aggregate not yet overdone, behaelter can be found;

spare parts - cook bolinders - bottom drive roll Feed roller below Cmtajuaa 2 Stueck Inlet, D = 147 mm; L = 233 mm; d = 35 mm Inlet, D = 145 mm; L = 240 mm; d = 35 mm Plate 2.2, No. 3

WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS

DISPONIBLE MENY SPARE PARTS FOR BRAND SSM OR MENEGATTO

MAK M20 Spares for sale. 1.Reusable Cyl Heads Bare-Pressure Tested Free From Crack:8-10 2.Piston With Groove With in Limit:8-10 3.Con Rod-Free From Crack, Wear Within Limit:8-10 4.Fuel Pump-Good Condition:8-10 5.Reusable Liners Wear Below 0.20mm-Free From Crack, Welding or any Damages:8-10 6.L O Filter-Good Condition:2 7.Water Pump-Good Condition:1 8.Lube oil Pump-Good Condition:1 9.Turbo Charger K54-Good Condition:2 10.STD Condition 6M20 Crankshaft, Within Std Limits, no Crack, no Ovality , Hardness Within Limits:1 11.Cam Shaft 6M20-Good Condition:2 12.Woodward UG-8 - Good Condition:2 13.6M20 Engine Block-Good Condition:1 14.Cam Shaft Gear & Crankshaft Gear-Good Condition:2 15.FLY Wheel-Good Condition 6M20:1 16.After Cooler-Good Condition 6M20:1

Infeed / Outfeed device

Press cylinder 12 to

COOK-BOLINDERS Inlet top, left thread, L 260 mm 2 Stueck Plate 4.3, No. 12 (L)

Clamping cylinder suitable for wedge tine press

for clock presses hydraulic up to 25 tons for hydraulic dimmed clock press

D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83

D 102 x L 78 x d 90 mm, material cast iron Plate 3.1B, No. 83

We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines

Available EMCII to SD machines - P76 - -> sold - P92 - P115 --> sold

Refer to code 1080 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1081 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.