spare used for sale

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 169x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.310/10.63.848.1091 P3 D63mm, total length of the screw approx. 1090mm, thread ...

Sychron motor with ball screw, MDD112D-N-030-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 185x26x28cm, ca. 250kg, consisting of: - 1 pc Sychnron motor MDD112D-N-030-N2M-130GB2, R911260224, from Rexroth, permanent magnet motor, max. 75Nm, 3000rpm, 62kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.78/10.80.910.1189 P3 D80mm, total length of the screw approx. 1189mm, thread  ...

Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Catalog number 4348 - 150mm cutting width - cutting height from 45-200mm - kerf thickness 1.3-1.4 mm - number of saw frame strokes 450 strokes / min - main engine 11kW - feed speed 1.5m / min - infinitely variable feed - central lubrication included: - saw frames x 6 pcs - spacers about 200 pcs - balls around 60 pcs - guides 12 pcs - spare support frame It is very easy to change the saw frame by turning the machine. Overall dimensions: - length 2500mm - width 750mm - height 1650mm - weight 2200kg - band sawmill used - perfect condition - original technical documentation Net Price: 85900 PLN Net price: 20452 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)

-Winding unit with right winding sense -Winding buckthorn holder for coils Inner diameter 2-5mm -Winding number 2-30 -Wire thickness 0.25-1mm -Gear translation AA + DD -Roller-drht richter -380V; 50Hz; -Documentation, spare parts plans Explusinszeichnungen and schematic available -Dimensions Space requirement 675 H430 735mm low Ehcubsv -Weight 65Kg

1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition

The Salmson pump type 208-15/7,5 is sold Pump was stored as a spare device. n-2900 rpm 7.5kW Flange diameter 200mm Bore 80mm Bdhrml3rbb Hole circle 160mm / holes 18mm 8 pieces Distance flange / flange 435mm Height 740mm depth approx. 300mm

Fuel oil tank, diesel filling station, tank plant, service filling station, steel tank with 100,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, the dome lid sanddowns and fit ...

Emergency generator Diesel engine Kälble Generator AEG Original operating hours 217h machine was used as a spare device and ran only for maintenance work Power 100kVA Dimensions Agreggat 3.5m1m1.5m High Bfb0n7gh2d Control cabinet 1m0.4mca 2m High Weight approx. 4.5to Schematic available

tank plant, fuel oil tank, service filling station, diesel filling station, steel tank with 50,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 to. - ex works, freely charged - We recommend: Above container from the outside sandblast, ...

Treif portion cutter Model: Zebra CE Serial: 450004.60060.3837 2003, Stainless, designed to cut fresh and soft products into this slices, the precision of the machines cutting performance is achieved by means of double grounded blades and adjustable feed pressure, perfect for fixed thickness slicing of large sub-primal boneless meat either fresh or cooked, min product -5'C, cutting thickness 2mm to 200mm, max product 610mm x 145mm, comes with spare blades, 3ph

2-sided LED display panel, SX502-420/05/0X-200-0A-20/0, Siebert, mint condition Special price The current price of a similar product is € 5.300 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! This high quality scoreboard was purchased in early 2000 and has been originally packed in spare parts storage since then. The unit is as good as new and has never been used. On the part of the manufacturer there is a limited service. Parallel interface for Profibus Serial interface for PC 2 page LED display 104 x 40 x 21cm Incl documentation and programs Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will ref ...

TO WHOM IT MAY CONCERN WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN NR 34S AT OUR STOCK. NEW BEARING BUSH 1151768-0353 517003 1PCS NEW LOCATING BEARING 1151768-0580 517002 1PCS NEW NOOZLK E RING IMO 3318 129.88cm3 1PCS NEW BEARING ASSY 5891812 30021F 8PCS ALL PARTS EX STOCK LOACTED AT IZMIR TURKEY. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

Ground precision ball screw, D63mm, 1275mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1516.6/30.63.1010.1275 P3, Fa, Steinmeyer, Ball screw diameter 63 mm, Pitch 30 mm, Length of thread 1010 mm Length of ball screw nut 325 mm, Max. total stroke 685mm, Total length of the spindle 1275 mm Diameter for coupling with motor 42 mm Diameter bearing seat 50 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the uni ...

Ground precision ball screw, D63mm, 1458mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1516.555/10.63.1215.1458 P3, D63mm, 1458mm, Fa. Steinmeyer, Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 1215 mm Length of ball screw nut 192 mm, Max. total stroke 1023 mm, Total length of the spindle 1458 mm Diameter for coupling with motor 32 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional ...

Kneading machine Kemper SPL 75 - 100 litres Masch. No. 672500 Strong and robust kneading machine in very good and well-maintained condition. Kneading machine from bakery.- 2 speeds- front and return pulse function timer no longer runs out- Operating hours: see photosPallet size, weight approx. 500kg (note when picking up) The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Ultrasonic welding system used as spare part carrier with at least 30 single-welded pneumatic feed cylinder solder cylinder sands and clamps

Machine type TIG inverter welding system gas-cooled DC system Make Merkle Type MobiTIG 190 DC Connection voltage 1 x 230 volts Adjustment range 5 - 190 ampere Switch-on time 20% ED at 180 amperes 100% ED at 90 amperes Current adjustment infinitely variable max. weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Fuse 16 Ampere Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare part box kpl. Equipped 18 month warranty 1 piece user manual New price €1,590.00 + VAT Price kpl. wi ...

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Ground precision ball screw, D40mm, 1479mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 3526.7/25.40.852.1479E P3, D40 mm, 1479 mm, Fa. Steinmeyer, Ball screw diameter 40 mm, Pitch 25 mm, Length of thread 852 mm Length of ball screw nut 140 mm, Max. total stroke 712 mm, Total length of the spindle 1479 mm Diameter for coupling with motor 28 mm Diameter bearing seat A 32 mm, Diameter bearing seat B 20 mm Diameter 34 mm x 340 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for  ...

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Ground precision ball screw, D63 mm, 962 mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type (123170) 409801/3-1, D63 mm, 962 mm, Fa. Steinmeyer Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 745 mm Length of ball screw nut 152 mm, Max. total stroke 593 mm, Total length of the spindle 962 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 50 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. ...

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

Ground precision ball screw, D50 mm, 1143mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, incl. roller bearings on both sides. 3526.508/30.50.900.1143E P3 D50 mm, 1143 mm, Fa. Steinmeyer Ball screw diameter 50 mm, Pitch 30 mm, Length of thread 900 mm Length of ball screw nut 193 mm, Max. total stroke 707 mm, Total length of the spindle 1143 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 40 mm, Bearing seat A 25mm Functional guarantee! We cannot provide a conventional guarantee and warranty for  ...

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Ground precision ball screw, D50x10, 1741mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1516.364/10.50.1410.1741, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 1410 mm Length of ball screw nut 150 mm, Max. total stroke 1260 mm, Total length of the spindle 1741 mm Diameter for coupling with motor 35 mm Diameter bearing seat A 44 mm, Diameter bearing seat B 48 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional gu ...

Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...

Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Ground precision ball screw, D50x10, 1741mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1516.322/10.50.1410.1741 P3, MAG IAS X.0109.0329, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 1410 mm Length of ball screw nut 150 mm, Max. total stroke 1260 mm, Total length of the spindle 1741 mm Diameter for coupling with motor 35 mm Diameter bearing seat A 44 mm, Diameter bearing seat B 48 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we  ...

As the exclusive sales partner of Ceetec A/S for the German-speaking region, I am pleased to introduce you to our P40 coating machines. The operating principle is very simple: In the front area, the workpiece is flooded all around with lacquer material (lacquer/glaze/impregnation/oil) and in the rear area 3 counter-running brushes pull off the excess material and massage it into the pores at the same time, so that the wood protection is optimally applied. A feed pulls the workpiece (length from 800mm) through the machine at 25m/min. For an extra charge, we offer you a suitable roller conveyor set. They can be firmly connected to the machine. In the outlet, disc rollers are used, which leave only barely visible traces on the back (the paint material used arrives). To make the purchase of your new brush machine a complete success for you, we offer the following services: � ...

Used Heuft Empty Bottle Inspector InLine IXs reflexx Device No. 2ZG044698 Condition: very good, ready for use at short notice ·       Commissioning 6 May 2012 ·       Upgrade for later integration of additional ground control using X-ray technology ·       Tape control Heuft Synchronous TX ·       Network Heuft Hlan ·       Haylofts two ways discharge with div. Heuft container transport Convejor ·       Troubleshooting Software Wizard ·       Software assistant guided instructions for the different container changes ·       Power max. 46,000 fl./h ·       5 Variety licenses incl. scope of delivery: ·       Belt control Spectrum TX ·       Measuring bridges for inlet control and discharges incl. height connections ·       2 x Discharge Delta K  ...

Precision ball screw, D50 mm, 1253 mm Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type model Star D50 mm, 1253 mm, Fa. Rexroth, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 1000 mm Length of ball screw nut 180 mm, Max. total stroke 820 mm, Total length of the spindle 1253 mm Diameter for coupling with motor 32 mm Diameter bearing seat A 35 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does n ...

Pendulum circular saw Irion Cutting width 350 mm Roller table 3000 mm L x W x H: 600 x 500 x 1800 mm Weight approx. 250 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Precision ball screw, D50mm, 1520mm, Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, D50 mm, 1520 mm, Fa. Rexroth, Ball screw diameter 50 mm, Pitch 20 mm, Length of thread 1370 mm Length of ball screw nut 215 mm, Max. total stroke 1155 mm, Total length of the spindle 1520 mm Diameter for coupling with motor 24 mm Diameter bearing seat A 40 mm, Diameter bearing seat B 42 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If  ...

Chain stemmer GF with drilling unit for wall mounting L x W x H: 1200 x 800 x 2300 mm Built in 1972 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Precision ball screw, D50mm, 1635mm, Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type R151054395, D50 mm, 1635 mm, Fa. Rexroth, Ball screw diameter 50 mm, Pitch 20 mm, Length of thread 870 mm Length of ball screw nut 90 mm, Max. total stroke 780 mm, Total length of the spindle 1635 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 40 mm, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does no ...

Ground precision ball screw, D50 x 10/6mm, 892 mm, Eisenmann, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 20070616, D50 x 10/6 mm, 892 mm, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 615 mm Length of ball screw nut 164 mm, Max. total stroke 451 mm, Total length of the spindle 892 mm Diameter for coupling with motor 40 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit d ...

Autom. filling machine (inline filler, 8-positions) for liquid products. Dosing volume: 50 to 1000 ml. Output: up to 4000 units / min. PLC SIEMENS Simatic S5. Machine comes with a lot of spare parts and accessories.

SOMOS Dry Air DryEr TF40 with integrated material conveying + MC1 control for plastic granules Overhauled: January 2020 Colour: Tuerkis Dry air quantity: 40m3/h Heating capacity dry air: 4.5 kW Drive power: 0.5 kW Total closing value: 5.0 kW Dimensions dryer + hopper: 95x66x230 (LxWxH in cm) - with reduction of support Weight Dryer: 165kg Additional: - 100l GRP drying hopper insulated on an integrated frame - Lid for separators available - Incl. dried material conveying automatically to the machine - hopper filling according to customer requirements; with conveyor or hand-filled Completely overhauled in 2019 with 1 year warranty, except wear parts Location: Germany Total dimensions: 110x512x220 (LxWxH in cm) without conveyor pipe removal Weight: 100kg Funnel filling and spare parts package up ...

Ground precision ball screw, KGT 40, 1453 mm, Blis, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type KGT 40, 1453 mm, Fa. Blis, Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1185 mm Length of ball screw nut 160 mm, Max. total stroke 1025 mm, Total length of the spindle 1453 mm Diameter for coupling with motor 32 mm Diameter bearing seat A 35 mm, Diameter bearing seat B 32 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guaran ...

Glue stand hydraulic, double-sided Format L x W: 3000 x 2000 mm L x W x H: 3200 x 2200 x 1100 mm Weight approx. 600 kg Built in 2003 Pressure per cylinder 2500 kg 8 clamping elements 2 Holders The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Ground precision ball screw, D83mm, 1180mm, Blis, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, D83 mm, 1180 mm, Fa. Blis, Ball screw diameter 83 mm, Pitch 10 mm, Length of thread 885 mm Length of ball screw nut 205 mm, Max. total stroke 680 mm, Total length of the spindle 1180 mm Diameter for coupling with motor 55 mm Diameter bearing seat A 65 mm, Diameter bearing seat B 45 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If t ...

Ground precision ball screw, D40 mm, 1200 mm, Kuhn, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Ke.Nr. 16000855, Sp.Nr. 5830, D40, 1200 mm, Fa. Kuhn Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1015 mm Length of ball screw nut 70 mm, Max. total stroke 945 mm, Total length of the spindle 1200 mm Diameter for coupling with motor 20 mm Diameter bearing seat A 25 mm, Diameter bearing seat B 30 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you  ...

Ground precision ball screw, D40 mm, 1088 mm, Wulf Hatzfeld, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, KGT 40 mm, 1088 mm, Fa. Wulf Hatzfeld Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 865 mm Length of ball screw nut 136 mm, Max. total stroke 729 mm, Total length of the spindle 1088 mm Diameter for coupling with motor 24 mm Diameter bearing seat A 30 mm, Diameter bearing seat B 30 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a func ...

Ground precision ball screw, D40 mm, 1200 mm, Danaher, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Sp.Nr. 812250/8, D40 mm, 1200 mm, Z-Nr.: 42.20101.01.3171.00, Fa. Danaher Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1020 mm Length of ball screw nut 145 mm, Max. total stroke 875 mm, Total length of the spindle 1200 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a func ...

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

Ground precision ball screw, D63mm, 1730mm, Kuhn, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Ke.Nr. 14000988, Sp.Nr. 2471+17, D63, 1730 mm, Fa. Kuhn Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 1455 mm Length of ball screw nut 143 mm, Max. total stroke 1312 mm, Total length of the spindle 1730 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 45 mm, Diameter bearing seat B 45 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give y ...

Complete Acrylic mIll machinery for sale: NSC Schlumberger & Cie. 1. Breaking Converter - ТВ-10, year 1999 - 1 piece. 2. Breaking-mixing machine R5GC15, year 1999 – 1 piece. 3. Drawing machine GC15656RE, year 1999 – 1 piece. 4. Drawing machine GC15683, year 2001 - 1 piece. 5. Drawing machine GC15698, year 2001 – 1 piece. 6. Roving machine FM-20, year 2003 - 1 piece. 7. Spinning-winding machine with steaming Zinser Germany Model 319LSL, year 1985 linked with Murata 7-V, year 1997. 2 pieces. All machines are in excellent working condition. Machines are on floor and all spare parts goes with the machines Sliver cans are available free of charges

E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.

Ground precision ball screw, D40 mm, 1415 mm, KSK, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 190009-0141-02, 1505441-7, D40 mm, 1415 mm, Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1080 mm Length of ball screw nut 161 mm, Max. total stroke 919 mm, Total length of the spindle 1415 mm Diameter for coupling with motor 18/25 mm Diameter bearing seat A 25 mm, Diameter bearing seat B 32 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you  ...