spare used for sale

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 6.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

New milk bacteria clarification separator (bactofuge) for reducing the bacteria in milk and consequently reduces the temperature of the pasteurisation process. Used to upgrade the quality of (drink)milk or for the production of cheese. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Process temperature: 50°C - 60°C. Feeding pressure (in): ± 1,5 bar. Bacteria clarified milk pressure (out): ± 4 bar., The efficiency, measurable in terms of the percentage of bacterial load abatement, depends on the product and process characteristics as follows:, - 97-99% anaerobic spores., - 85-95% aerobic spores., - 75-95% total bacteria load., Milk bacteria clarification capacity: 8.000 liter per hour., The new offered milk bacteria clarification separator (bactofuge) comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Used Isobaric Complete Bottling Line 6000 bph Used isobaric filler Machine Bertolaso 11000 bph Suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine Used Capping Machine Bertolaso RS 6 9000 BPH Straight ...

General SKU403S960 LocationBarneveld MakeAlfa Laval TypeTS6-MFG No.30110-16425 Year of construction2017 Pressure Working pressure8 Bar Main Features MaterialStainless steel Surface0.9 m2 Size length328 mm Sizes width508 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Heating surface0,9 m2 Capacity2,5 ltr / 2,96 ltr Number of platens12 Plate sizes326x508 mm ConnectionsDN 65 (4x) Max. temperature140 degr. C Information Total height0,7 Weight200 Kg Floorspace0,7x0,4 M Extra Specificationsincluding 1 spare end plate and 3 spare intermediate plates. material sealing: EPDM checkUNUSED Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

General SKU403S961 LocationBarneveld MakeAlfa Laval (SE) TypeM6-MFG No.30110-16416 Year of construction2017 Pressure Working pressure7 Bar Main Features MaterialStainless steel Surface2.2 m2 Size length750 mm Sizes width250 mm Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Heating surface2,2 m2 Capacity3,6 ltr / 4,03 ltr Number of platens18 Plate sizes250x750mm ConnectionsDN50 (4x) Max. temperature100 degr. C Information Total height0,95 M Weight170 Kg Floorspace0,75x0,35 M Extra Specificationsincluding 1 spare end plate and 3 spare intermediate plates. material sealing: EPDM checkUNUSED Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinat ...

General SKU403S966 LocationBarneveld MakeAlfa Laval (SE) TypeTL10-BFG No.30110-16415 Year of construction2017 Pressure Working pressure7 Bar Main Features MaterialStainless steel Surface40 m2 Size length1500 mm Sizes width375 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4401 (316) Plate heat exchangerscheck Heating surface40 m2 Capacity36,6 ltr / 37,5 ltr Number of platens81 Plate sizes375x1500mm ConnectionsDN100 (4x) Max. temperature100 degr. C Information Total height2 M Weight900 Kg Floorspace1,2x0,5 M Extra Specificationsincluding 1 spare end plate and 3 spare intermediate plates. material sealing: EPDM checkUNUSED Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

General SKU403S963 LocationBarneveld MakeAlfa Laval (SE) TypeTL10-BFM No.30110-16412 Year of construction2017 Pressure Working pressure7 Bar Main Features MaterialStainless steel Surface57 m2 Size length375 mm Sizes width1500 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4401 (316) Plate heat exchangerscheck Heating surface57 m2 Capacity52,7 ltr / 51,6 ltr Number of platens116 Plate sizes375x1500 mm ConnectionsDN50 (4x) Max. temperature100 degr. C Information Total height1,9 M Weight950 kg Floorspace1,1x0,5 M Extra Specificationsincluding 1 spare end plate and 4 spare intermediate plates. material sealing: EPDM checkUNUSED Plate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

General SKU289P505 LocationBarneveld MakeSartorius (DE) TypeSARTO / MF / M38 and SARTO /CIP No.3/30/001/6 and 3/30/003/6 Year of construction1996 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel Filter surfaceUnknown Information Floor space2.3x1.2 M Total height1.4 M Weight350+200+150+200 KG Extra Specifications1 Centrifugal pump brand unknown 1 pipe heat exchanger length 2000 mm with 7 pipes approx. 25 mm internal total heated surface area 1.25 m2 19 spare plate filters Pall Filtron cassette type NOVA NMWL: 5K 1 Danfoss HVAC DRIVE controller type VLT 3516 HV-AC 380-415 Volt 1 spare filter Pall Membralox Performance according plant information was uptop 70 m³/h @3-5 bar. ( product Heparin ) Miscellaneous filtersSartoriusFilters > Miscellaneous filtersBrand > Sartorius What you can expect from Foeth: -- Machine is in ...

Grinding wheel : Standard grinding range (dia.) : Ø1~80 mm Capacity increases with special arrangement : Ø40~150 mm Grinding wheel size (O.D. x width x I.D.) : Ø455 x 205 x Ø228.6 mm Grinding wheel speed : 1260 r.p.m Grinding wheel motor : 15 HP x 4P Regulating wheel : Regulating wheel size (O.D. x width x I.D.) : Ø255 x 205 x Ø111.2 mm Regulating wheel speed : 10~300 r.p.m. (variable) Regulating wheel tilt angle : +5° ~ -3° Regulating wheel swivel angle : ±5° L x W x H : 2200 x 1840 x 1530 mm EQUIPMENT : Magnetic Coolant Separator 80 L/min + Paper Filter 80 L/min : Auto. Infeed Attachment (Hydraulic) : Spare grinding wheel flange : x1 Spare regulating wheel flange : x1

Triblock isobaric filler mod. 12-12-5 consisting of 12 rinsing tongs, 12 filling straws, 5 capping heads with 26 crowns. The fully automated machine can also be put in line complete with: bottle drive motor at the entrance, Samung touch screen plc panel for managing the machine functionality in manual / automatic mode, format change from 100 ml to 1000 ml glass n ° 1 spare Siemens inverter, set of original spare gaskets. Year of construction December 2017 Speed up to 1,500 bottles / h beer / sparkling water / still water / wine. The machine will be decommissioned from the line in mid-April.

Type: LFS 10 - 2SP Manufacturer: Okuma Year of production: 1999 Location: Czech Republic Description: The machine is in good technical condition. Control system: OSP 7000 L Tris conveyor: yes Operating hours: 34.288 in the CNC process / as of 16/05/2019 Accessories: spare pallets, tool holders spare pneumatic 3-jaw gripping head for robot. AJ Documentation. Possibility of tour in agreement after agreement.

SMALL METAL PARTS AND ELECTRICAL SPARE PARTS: - Miscellaneous small metal parts (nuts, screws, bolts, washers, etc.) in plastic containers - Small parts and electrical spare parts of various types and brands (Bticino, Scame, Ave, Vimar, etc.).

Description: Content consisting of cables, switches, machine spare parts, mostly spare parts from SIEMENS, screws, lathe tools, accessories for TRAUB lathes, fuses, O-rings Approx. Onsite Dimension. (l x w x h): 950 x 500 x 1,900 mm, weight approx.: 100 kg

Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000

Shelf Shelving System Spare Parts Warehouse High Rack, Storage Rack, Industrial Rack Used Manufacturer: GEMAC Spare parts warehouse over 3 walk-in levels with floors, elevator and office space approx. 25000 sheet metal shelves each approx. 400 x 1100 mm Shelf load: 80 kg Load max: 500 kg Field width: approx. 1100 mm Depth: approx. 400 and 800 mm Shelf height approx. 1800 mm The plant is currently being dismantled

Krones labeling machine, Robusta regularly serviced with documentation from Austria. Machine in Poland SUPER STATE! Well cared for! SN: 722-544, Up to 8000 bph Brand: Krones; Type: Robusta; Year of construction: 1996; Serial number: 722-544; Electrical connection: 380 V; Overall dimension L: 2300 mm; Overall dimension B: 3000 mm; Overall dimension H: 2500 mm; 2 vacuum cylinders, 3 labels, full documentation! comes from a very well-known jam and beverage factory in Austria, has always been regularly serviced! She applied the following labels: on hexagonal jars 196ml 90x122 hull, 28x45mm ride 385ml 89 x 167mm body, 75 x 50mm back 580ml 75 x 50mm (trunk and back) There are also a lot of spare parts: Spare parts package: 3 servomotors refurbished 1 servomotor new 2 plates for servomotors glue roller new small parts Clutch for the worm New value tens of t ...

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10 800 cph represents indeed a reliable and efficient solution for industrial bottling operations Equipped with specialized and high quality equipment this line is meticulously designed to maximize productivity and ensure in fact optimal results CFT Empty Can Twist Rinser Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans Moreover with its dual can rinser system and spare parts sets for 0 35L and 0 47L aluminum cans it ensures flexible operation tailored to specific production needs Additionally the rinse process guarantees pristine can surfaces vital for maintaining product integrity CFT 20 Valve Can Filler Seamer of the CFT Canning Line The 2013 model RS20 CFT 20 valve can filler with seamer ensures precise and rapid filling o ...

BINOVA TWIN SCREW EXTRUDER for PP HDPE, with crammed feeding unit, Barrel with 2 x 128 mm screws 40 LD, n.2 degassing pumps, positioned 2 mt.apart for better degassing, 250 kw a.c.drive ( + 1 x 355 kw spare drive), n.2 spare screws, semi-automatic screen-chager with 300 mm screens, water ring pelletizer, drying centrifuge, electric cabinet and operator desk, constructed in 2008, complete with Users manuals, drawings, CE compliance, offered as is, where is

There are 7x Roller Mills Golfetto GLCO, 2x sifters, 14x rotary valves, 2x two-rotary valve benches, 2x five-rotary valve benches, the corresponding separators, 2x bran centrifuges, a flour vibro, 1x flour collecting screw, various fine impact mills, 1x grain tipping scale and 2x micro dosing units for ascorbin and malt addition, with some spare rollers for the roller mills, spare sieves for the sifter and flour vibro, have been maintained regularly.

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

Storage tank, storage tank, diesel tank, fuel oil tank, steel tank, yard filling station, service filling station - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 3.80 m - D = 1.60 m - weight approx. 1.6 to. - ex works, freely charged - General: You will receive an invoice with VAT shown. The purchas ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Viledon Filter Mats, PA/560 G-10 TO Cut dimensions e.g. 2140 x 1229 or 4500 x 1436 or similar. The filter mats are superimposed, partly minimally contaminated on the side wheels, but otherwise as good as new. Delivery price 60% below new price plus VAT, packaging and transport. 8 €/m2 We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Ladies and gentlemen, Below you will receive a non-binding offer for railway spare parts for all common railway coaches and railway freight wagons new and partly used: Wheelsets All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. Inte ...

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

The best way to own a HPLC mass spec in your lab! fischer analytics - Quattro series tandem mass spectrometer system Waters Quattro Premier XE very sensitive and reliable spectrometer, comparable with AB Sciex 4000 or 5000. CMC nitrogen generator NGM-11 spare filter elememnts Edwards E2M28 foreline pump WATERS 2695 HPLC system WATERS 996 PDA detector unit is sold as tested, meets all specs!

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. L = approx. 2.80 m / D = 1.60 m / weight approx. 1.3 tons. / ex works, freely charged. General: You will receive an invoice with VAT shown. The purchase ...

Diesel tank, storage tank, service station, tank plant, steel tank, storage tank with 10,000 litres of content according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 tons. / ex works, freely charged. General: You will r ...

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

Used roller doors for painting systems between the painting booth and the dryer Make : ITP, Wolf Width: 1 pc. approx. 6.1 m 1 pc. approx. 5.7 m 1 pc. approx. 2.6 m Height: approx. 2.6 m each Drive: electric, each approx. 0.5 kW Location : Nuremberg Warehouse Sell price: € 1,450,- for 5 to 6 meter long roller doors € 1,250,- for 2 to 4.99 meter long roller doors per net, from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de

Ladies and gentlemen, we can offer you on request various aircraft spare parts new and used. With a friendly greeting Trade & Translations

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

We have 2 fillers for sale! One machine for 95 mm cups, dual filling/sealing/lid stations for increased capacity. One machine intended for spares (100 ml plastic cups for juice/water). Lots of spare parts. Price is as is, where is. Could also be sold refurbished, please inquire. Machines located in our warehouse in Lund/Sweden. please contact Editec AB.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

Lifting device control MRC 2 220 - 240 VAC 50 Hz 3000 VA Lifting device control comes from operating resolution . Spare parts, filters, powder guns, wear parts in stock. Tel. 05242 / 43186 email info@pradler.com Filter cell Gema ITW 592 x 592 x 292 mm from operating resolution in stock Filter cartridge D = 327 x 605 mm for Wagner etc. in stock TS Residual filter D = 115 mm x 605 mm please enquiries / many pos. at the camp Mfg. Pradler Machine Service Tel. 05242 / 43186

Chamber filter plates PP Polypropylene chamber filter plate -for almost all manufacturers: Rittershaus & Blecher, Passavant, Netzsch, Hoesch, von Roll, Diemme, Filox, Andritz, etc. Cake thicknesses and plate thicknesses are freely selectable depending on the application and filtration conditions. The chamber filter plate made of plastic is characterized by excellent chemical resistance and easy handling due to its low dead weight. - One component - The filter surface consists of a special conical bump structure. This pimpled structure supports the filter cloth and ensures excellent filtration performance for each individual chamber. - Filtratin inputs and filtrate sequences individually according to customer requirements - High plan parallelism, thus flawless sealing in the closed state. Standard formats: 250, 400, 470, 500, 630, 800, 915, 1000, 1067, 1200, 1300, ...

High voltage unit EPE 726 , Gema high voltage unit for two powder guns 100 KV , plug-in adjustable high voltage , dosing air and conveying air Switchable Pistol 1 / Pistol 2 / Pistol 1 + 2 Insert from maintenance general overhauled. Powder guns , spare parts in stock Tel.05242 / 43186 email: info@pradler Filter cells for Gema 592 x 592 x 292 mm 298.00 € per pc net see pictures . ! Prices Net excluding MWsT. Mfg Pradler Machine Service Tel. 05242 / 43186 email: info@pradler

Membrane filter records Standard welds together the filtration cycle can be shortened by the application of membrane filter records considerably, while the unproductive phase of the pressure filtration is broken off and is substituted with the postpressing. full plastic membrane record with welded together membranes, thereby the easiest Handling and the highest chemical permanence perfect separation of the Nachpressmediums of the filtration product variable material choice membrane corners as ? circle to the membrane movement poor in tension for almost all formats and manufacturers. they need spare parts, accessories, service or servicing for your chamber filter press high-pressure membrane pump or drainage facility? request us. we help you with pleasure.

12 cylinder diesel engine SACM-AGO, Jeumont cutter generator AC630 L4, 2,500 KVA, water-cooled, incl. control cabinets, incl. 4 large fans, incl. additional parts 1 unit complete and 1 piece (not complete) additionally as spare part carrier Year of construction is estimated

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Cross-moving trolleys for the lateral transport of passenger cars, e.g. from the paint booth to the adjacent drying cabin. Make : Wolf and Lutro Track width: 580 mm or 600 mm Dimensions: 630 x 580 x 120 mm (WxLxH) Material: Aluminum or steel Weight: approx. 8.5 kg or approx. 12 kg We also have older cross-slide trucks from LUTRO, Hildebrandt, Durst etc. made of sheet steel with larger gauges in stock, e.g. 810 mm, 880 mm and 1000 mm. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask. Please ask.

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

We offer spare parts and accessories for hose pouring machines. Visit our homepage: www.protech-web.de

Cone diameter: 2,100 mm!, feeding size: 0-140 mm, gap: 10-60 mm, capacity: approx. 600 t/h (0-20 mm), up to 800 t/h, E-motor 250 kW, many spare parts, completely with basic frame, approx. 100 t.; hydraulic unit in extra 20ft container currently dismantled into parts, but ready for transport