spare parts auto used for sale

included: lattice box. Auction-ID: A1-45495-272

On and including 1 pallet Auction-ID: A1-45188-155

An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.

Scaffolding parts aluminium ALTRAD, erected on the right side next to the prefabricated garage, other parts resting on top, 4 scaffolding stairs, completeness n. known

KG pipe parts various. Grades, content 4 lattice boxes

Equipped with various turning parts, spindles, and clamps for lathes Auction-ID: A1-41992-79

Metrohm 858 Professional Sample Processor for Parts

Machine parts granulate conveyor PIOVAN C30E3 year 2015, S/N 50000058132, apparently unused, with hydraulic closing device HILGER & KERN pump 30, year 905

Machine Parts Material Separator PIOVAN 1x C30I Year 2006 S/N 50000022386 2x C10IX Year 1999, S/N 5AL 195-9004, 5AL 194-9004, 5 AL 198-9004

Machine Parts Material Separator PIOVAN 1x C15IX Year 1999 S/N 5AL 202-9004 1x C10I Year 2008, S/N 50000031431

Auction-ID: A1-40243-33

John Deere parts 30/40/50 series John Deere parts 6000/6010/6030 series John Deere parts 7000/7010/7030 series Hydraulic pump 40/50 series Accumulators 30 series Bearings and seals Engine overhaul kit Coupling shaft front drive 6030/7030 series Bulbs 30/40/50 series Lamps R series Work light kits 6030/7030 series PowerQuad spare parts 6010/6030 series Tank Float and Pump 6030 Series Temperature Control 6030/7030 Series Grammer seat with air suspension, air cushions and heated seats Grammer cassette air suspension Bowden cables 6010/6030 series (operation) Wiring harnesses 6010/6030 series Hydraulic Control Valve 6000/6010 Series Auction-ID: A1-40135-207

John Deere R Series Parts John Deere 6030 Series Parts John Deere 7030 Series Parts John Deere 77/7810 series parts John Deere 40/50 Series Parts Various AGCO parts Filters and strings Cab parts Orbitrol R-series Drive shaft R-series Gasket Sets Radio Motor wiring harness Autopower spare parts 77/7810 series Hydraulic pump 4050 series Side cover 77/7810 series Towbar and fender parts Front Loader Rack 6030 Series Exhaust manifold Air compressor Heat shield PTO Shaft Adjustment 6030/7030 Series Fluid coupling Nitrogen balls Kubota cylinder head with water pump Auction-ID: A1-40135-206

Length : Approx. 8.00 m; Width: Approx. 2.00 m; Height: Approx. 0.85 m ; Payload: 8.00 to. Auction-ID: A7-45983-150

Custers Mobile Scaffolding 2 shelves each 2m wide 4 side panels, each 2 m high 4 Rolls 5 crossbars 4 diagonal struts Good condition Auction-ID: A1-45889-2650

Workbench made of two parts Length 300 cm Depth 60 cm Height 84 cm Mint condition, dismantled, feet made of steel, worktop made of MDF Auction-ID: A1-45889-2696

with four swivel castors, lid that can be opened 1200x630x800mm Auction-ID: A1-45889-336

as good as new current new price: 12,000 EUR at Heidenhain Auction-ID: A1-45977-20

\"Load capacity 500 kg Inner dimensions: 2.20 m long x 1.25 m wide x 1.15 m high\" Auction-ID: A7-45983-37

Pallet with TRUMA parts, 1 pallet / box with various Truma parts, silencers, flexible pipes, blow-out ducts, clamps and more unchecked! Auction-ID: A7-45960-9

Metal cabinet grey Schäfer Shop – inside 9 shelves, 158 × 67 × 27 cm Used. with content – standard parts, see picture Auction-ID: A1-45889-2625

Tub volume: approx. 1940 x 1000 x 740 mm incl. Clamping width: approx. 6000 mm Auction-ID: A7-46287-180

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincerely Trade ...

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products

Poly-clip PDC 600 Semi Automatic Double Clipper, for fibrous, plastic, natural and collagen casings, calibres up to 90 mm, on a trolley, Suitable for following clip sizes: S 625 / 628 / 632 / 638, upon request with separator, in good condition!

Flaring system for sewage gas combustion - Mint- Manufacturer: Haase Maximum flow rate: 10 m³/h Gas pressure: 15-50 mbar Material: Stainless steel (V4A) Diameter: 150 mm Total height: 4.500 mm Emissions: CO2 and NOx to TA-Luft in the range of 50-100% of the maximum power. Flaring system is unused. Only a test run was conducted so as new and in very good condition! System is still built and can be visited at any time!

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

Semi-automatic/hydraulic Hacksaw Manufacturer: machine tool factory Silistra Type: OH 163.01 Serial No.: 970 Year of construction: 1972 Technical data: E supply: 380 V, plug 16 A

Used semi-automatic batcher granules machine, type DP/3. Production - Italy. New 2005. Stainless steel.

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.

Rod tube

Korimat KA 160 autoclave, 120 liters, 1.6 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

AUTOMATIC HYDRAULIC GUILLOTINE type MONGUZZI TRA 2600 Second hand machine Volt. 380/50 Working conditions : good Technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, smooth surface. You are very welcome to test the machine in our facility in Koblenz, Germany.

HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

Autoclave, Autoclav, Impregnation Chamber Overpressure Chamber Used Type: HP 2166-68 Volume approx. 6.8 m3 Length inside approx. 5 m Diameter inside approx. 1.5 m Large door on the end side approx. 1.5 m in diameter Max temperature: 140°C Pressure max 10 bar Dimensions outside approx.: 5600 x 1800 x 2500 mm 6 pieces in stock The autoclaves are used for sterilization of equipment, tools and materials. They can be used in the chemical industry, medicine and also in the processing industry for vulcanizing tires and rubber products or for printing impregnation. The system is completed according to your wishes by our own special machine construction. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Korimat KA 160 autoclave, 120 liters, 2.5 bar, mc control, as an autoclave for sterilizing including the measuring of the core temperature, as a rapid pressurized boiler for cooking meat, vegetables, soaps, and ready-to-serve meals, electrically heated, mottled surface. You are very welcome to test the machine at our facility in 56070 Koblenz, Germany.

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price

Size max 355 x 250 mm min 115 x 100 mm Speed max 4200 c/h Number of stitches Standard 7 Dimension 1500 x 1400 mm ; working condition

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine