spa used for sale

Bull gear z=82

Seal Drawing No. 14430-2815C2

Seal Drawing No. 14430-2818C2

Seal Drawing No. 14430-2824C2

Pinion Drwaing No. 14272 - 167 C1 z=20

Pinion Drawing No. 14821- 167 C9 z = 23

Break

Knife Drawing No. 05714-223C1

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

control Mitsubishi CNC travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg table size 780x630 mm

Set for KUKA robot working area limitation Manufacturer: Nabtesco precision Europe Type: RV-260F-58.62 All information without guarantee

PTO hydraulic pump unit consisting of 1 piston pump (manufacturer unknown, no label present, only cast characters (only read number: 479 and 40 °) and a gear pump HALDEX W15A1 44 L K5 26NN.) Unaudited for screwdrivers for recovery. -Jacobis local, environmental & green care technology- Used machines for plant & sports center maintenance, Garden & landscaping, cemetery technology & winter service, sweeping work & disposal, environmental care, motors and more...

WIELAND IS 75 R Mobile Spaene extractor extractor system Manufacturer WieLAND Type IS 75 R Consisting of suction system type IS-75 R and Cooling agent tank, type FS 300, built 1986 Dimensions (LxWxH) approx. 1500 x 1200 x 1700 mm Weight approx. 550 kg Special price

many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available

Wartsila VASA V32 spare parts and complete engine also. 1.Reusable Liners wear below 0.30mm – free from crack, welding or any damages:8-10 2.Reusable Cyl heads bare – pressure tested free from crack:8-10 3.Piston with groove with in limit:8-10 4.Con rod – free from crack, wear within limit:8-10 5.Fuel pump - good condition:8-10 6.Centrifugal filter-good condition:1 7.Water pump – good condition:1 8.Lube oil pump - good condition:1 9.Turbo charger 354-11- good condition:2 10.Cam shaft – 12v32 A BANK & B BANK-good condition:2 11.WOODWARD 723 card - good condition:2 12.12v32 engine block - good condition:1 13.CAM SHAFT gear & CRANKSHAFT GEAR- good condition:2 14.FLY WHEEL- good condition 12V32:1 15.AFTER COOLER - good condition 12V32:1 If you are interested in complete engine part, please inform accordingly. For your information in past, we have supplied Engine  ...

CNC lathe Webo Roeperwerk in single parts! Machine coerper no longer available! Only spare parts / parts according to the description below. Type Weboturn 400 Control Siemens System 3T ( CNC 3T) items can be shipped, e.g. - Spindle verstaerker - Achsverstaerker, - CNC control, boards etc. - Monitor No longer available: 1. Main spindle with spindle stick 2. Riding stock 3. Ball roller spindle of the x-axis All photos of the machine, control and the boards can be requested on request. The price of the additional information refers to the main spindle motor with Achsverstaerker as described above. Special price

Various shredders to fit on EXTEC screening machines (e.g. 5000 S, Turbo, Turbotrac, S-series)

We supply service and spare parts for seam and machining centers of the manufacturers Elumatec, Rapid, URBAN, Josting, MAW Nottmeyer and Actual. In particular, electronic components of the following machine types are constantly available. Machining centers / saegen: SLK 118, SBZ 122, SBZ 130, SBZ 131, SBZ 140, SBZ 150, DG 142, DG 204, DG 244, DGL 200, DGL 220, DGL 250, DGL 260, DGL 300 Welding machines URBAN, ACTUAL: AKS 6100, AKS 6105, AKS 6110, AKS 6600, AKS 6605, AKS 6610, AKS 6900, AKS 6910, AKS 6250 Plastering machines URBAN: SV 410, SV 410-B, SV 420, SV 430, SV 430-C, SV 530, SV 530-B, SV 530-C, SV 800, SV 815, SV 820, SV 840 Fluegel fitting machines FBA 2500, FBA 2502, FBA 2504 A machine-specific parameterization of the respective components is possible (software, firmware). We keep the following components constantly available: ferrocontrol IPC E500, E550, ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 unused flail mower shaft to Dücker SMT 15

TO WHOM IT MAY CONCERN; WE VE GENUINE NEW & RECON SPARE PARTS OF MAK 8L 35 AT OUR STOCK. READY TO SHIPMENT IF YOU'VE ANY FURTHER QUESTIONS PLS LET ME KNOW Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE... GENUINE NEW & RECON SPARE PARTS OF CREPELLE AT IZMIR TURKEY TO WHOM IT MAY CONCERN; WE'VE MANY GENUINE NEW AND RECON GENUINE SPARE PARTS OF CREPELLE SN-3 AT OUR STOCK PARTS READY TO SELL... PLS REFER PART LIST ON PICTURES IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 aliagamarine.com TURKEY

FOR SALE... NEW GENUINE PARTS OF CAT 3512D & CAT 3406 CAT 3306 TO WHOM IT MAY CONCERN; WE VE LISTED NEW GENUINE SPARE PARTS OF CAT 3512D / CAT 3406 CAT 3306 AT OUR STOCK PLS REFER LIST OF PARTS ON PICTURES AND SOME SAMPLE PICTYRES OF PARTS ON ATTACHá IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Best of Regards; Aliaga Marine Services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

The OE750 spark spectrometer and the new OE720 are metal analyzers with new, groundbreaking performance features. With them, you can analyze all elements found in metals at low detection limits and with state-of-the-art multi-CMOS technology. Ever stricter requirements, complex supply chains and the increasing use of scrap as a base material are forcing foundries and the metalworking industry to reliably detect the lowest ppm values of traces and accompanying elements. Until now, spark spectrometers in these power ranges have been unwrive for many. With the OE series, this has now changed fundamentally. Hitachi OE spark spectrometers analyze all essential alloying elements and extremely low levels of trace, accompanying and treatment elements in metals, e.B nitrogen in steel. The OE750 also covers rare applications such as oxygen in copper and oxygen, nitrogen and hydrogen in titan ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 450 mm Width: 400 mm Max. dimensions of work piece: Length: 400 mm Width: 450 mm Height: 300 mm Table load max.: 200 kg Longitudinal traverse (X-axis): 200 mm Cross traverse (Y-axis): 300 mm Vertical travel (Z axis): 300 mm W axis: 230 mm Diameter of electrode wire: from: 0.3 mm up to: 3 mm Voltage 50 Hz 3x: 440 Volt Total power required: 4 kVA Weight total installation approx.: 850 kg Overall dimensions machine: Length: 1390 mm Width: 990 mm Height: 2080 mm

unused consoles o.a.., presumably to make "HOLDER". material thickness 10 mm € 200,-net + 19% VAT

Air nozzle 110 mm with flexible hose 80 mm, total length approx. 890 mm, shaft-mounted holder for 20 mm pipe

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jig Ingersoll IG750 Bj1992; Travel 500 x 700 x 350 with 6-fold electrode changer for Erowa ITS copper + graphite electrodes.

NEW GOVERNOR WOODWARD UG-8

Spreader pad width 1810 mm ex miner dung-and compost spreaders M 92 SG,. with 2 scatter shaft diameter approx. 520 mm. used part, bearing i.O. More parts available. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Deck baking oven W & P, type: Matador MD 101 - In the bakery State - 5 floors - 2 thermal circuits (upper 2 burners and bottom 3 flock) - oil burner weishaupt - 1 stone slab broken but spare available - regular maintenance - last 2016 - in one piece (mounted) -in the bakery condition - condition: good baking surface: 9.6 m2 Hearth size: B T 1.60 x 1.20 m The furnace is located in the bakery. An application is possible in one piece and can be applied on request, like us.

Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: WR 600 Included in delivery are: 01x pallet rack traverse, second choice Material colour: RAL 5010 Gentian blue Box profile: 60 x 40 x 1.25 mm Traverse type: TR4-088-064-25CEL QV71|71|3 Clear width: 880 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: WR 600 Included in delivery are: 01x pallet rack traverse, second choice Material colour: RAL 5010 Gentian blue Box profile: 60 x 40 x 1.25 mm Traverse type: TR4-200-064-25CEL QV71|71|3 clear width: 2,000 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: WR 600 Included in delivery are: 01x pallet rack traverse, second choice Material colour: RAL 5010 Gentian blue Box profile: 60 x 40 x 1.25 mm Traverse type: TR4-240-064-25CEL QV71|71|3 Clear width: 2,400 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

We heve some pnew parts in stock for STX MAN , Wartsila W32, HYUNDAI, MAN TURBO central control, Caterpillar

Technical data: Stand height: 2,000 mm Shelf depth: 600 mm Shelf length: 2,050 mm Usable area: 1,950 x 600 mm Shipping Weight: approx. 130 Kg Consisting of: 2x Shelf stand 2,000 x 600 mm / unassembled 6x Trusses 1,950 mm 6x Steel - Insert - 965 x 547 mm 4x Metal base Specialist load: 400 kg / at evenly distributed load Further attachment shelves of this variant are available for 184 € / piece incl. VAT ! These shelves are also available in other sizes. Let us create a free offer. Shipping possible on request.

Manufacturer: Lid Type: DE10C Year of construction: 1997 Following the technical data: Table dimensions L x b 390 x 280 mm traverse path: X - axis: 250 mm, Y - axis: 180 mm, Z - axis: 250 mm Table - Quill distance min./max.: 240 / 490 mm Table load: Max: 250 kg

PLUNGE EDM MACHINE CDM ROVELLA MODEL: ZENIT P1 STROKE X: 1500 MM STROKE Y: 1000 MM STROKE Z: 500 MM C AXIS 10-POSITION TOOL CHANGER MAX ELECTRODE WEIGHT: 2,500 KG MAX. WORKPIECE WEIGHT: 12,000 KG SUPPORT SURFACE: 2000 X 1200 MM TUB SIZE: 3000 X 1500 X 1075 MM CONTROL: HEIDENHAIN MOD. 406

PLUNGE EDM MACHINE AEG 443 B C AXIS X-AXIS STROKE: 1000 MM Y-AXIS STROKE: 600 MM Z-AXIS STROKE: 500 MM

PLUNGE EDM MACHINE AEG ELBOMAT 333 P ALEXTA DISPLAYED X-AXIS STROKE: 414 MM Y-AXIS STROKE: 292 MM Z-AXIS STROKE: 360 MM

PLUNGE EDM MACHINE AEG ELBOMAT 402 M DISPLAYED GHIBLI X-AXIS STROKE: 290 MM Y-AXIS STROKE: 160 MM Z-AXIS STROKE: 150 MM TABLE: 550 X 400 MM MAX HEIGHT PIECES: 300 MM MAX SIZE PIECES: 750-545 MM

PLUNGE EDM MACHINE AEG ELBOMAT 944 X-AXIS STROKE: 818 MM Y-AXIS STROKE: 326 MM Z-AXIS STROKE: 305 MM