spa used for sale

Siemens Sirius soft starter Type: 3RW3027-1BB04 Input voltage: 200-480 V AC, 50/60 Hz Control voltage: 24 V DC Rated current: 32.2 A Power: up to 15 kW at 400 V Function: Soft start for three-phase motors Weight: approx. 1.2 kg Condition: used, tested Country of origin: Germany Price without VAT per piece Piece 1

Max workpiece size 1030x800x350 mm Table size 950x630 mm Can be inspected under power

Siemens SITOP PSE200U Selectivity Module 6EP1961-2BA21 Type: SITOP PSE200U Input Voltage: DC 24V/40A Output: 4× DC 24V/10A Weight: approx. 0.5 kg Condition: used, tested Price without VAT per piece Country of origin: Austria Pieces:6

Siemens SIMATIC ET200S with modules SKU: 6ES7 151-1BA02-0AB0, 6ES7 138-4CA01-0AA0, 6ES7 138-4FA05-0AB0, 6ES7 138-4FB04-0AB0 Type: ET200S IM151-1 High Feature + I/O Modules Input Voltage: DC 24V Modules 1× IM151-1 High Feature (6ES7 151-1BA02-0AB0) 1× PM-E Power Supply (6ES7 138-4CA01-0AA0) 2× Digital Input 8×24VDC (6ES7 138-4FA05-0AB0) 2× Digital Output 8×24VDC (6ES7 138-4FB04-0AB0) Weight: approx. 1.2 kg total Condition: used, tested Price without VAT per piece Country of origin: Germany Piece 1

Siemens SINAMICS G110 Frequency Inverter Item number: 6SL3211-0AB13-7BA1 Type: SINAMICS G110 CPM110 AIN Input: 1AC 200-240 V ±10%, 6.2 A, 47-63 Hz Output: 3AC 0-230V, 2.3A, 0-550Hz Motor power: 0.37 kW Degree of protection: IP20, integrated mains filter class B Temperature range: –10 ... +50 °C Weight: approx. 1.5 kg Condition: used, tested Price without VAT per piece Country of origin: EU (UK) Pieces: 1

Siemens SCALANCE X005 Item number: 6GK5005-0BA00-1AA3 Type: Industrial Ethernet Switch, unmanaged, 5 ports (RJ45, 10/100 Mbps) Supply voltage: 24 V DC Power consumption: approx. 0.1 A Weight: approx. 0.3 kg Condition: used, tested Price without VAT per piece Country of origin: Germany Pieces: 2

Charmilles Form 20 Tabledimensions / T slots : 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg

Siemens SIRIUS soft starter Item number: 3RW3018-1BB04 Type: Sirius 3RW30 Control voltage: 24 V AC/DC Nominal voltage: 200-480 V AC, 50/60 Hz Rated current: 17.6 A Motor power: 4 kW (400 V) / 7.5 kW (230 V) Degree of protection: IP20 Weight: approx. 0.45 kg Condition: used, tested Price without VAT per piece Country of origin: Germany Piece 1

Chucks 4 claw dia:1000 mm

Beckhoff PROFIBUS BK3150 bus coupler with I/O modules Model No.: BK3150 Power supply: 24 V DC Baud rate: up to 12 Mbaud (autobaud) Model: KL1809 Digital Input 16-Channel 24V DC 0.5A KL2809 Digital Output 16-Channel 24V DC 0.5A KL9010 Bus End Terminal Interface: PROFIBUS DP Sub-D 9-pin Manufacturer: Beckhoff Automation GmbH Condition: used tested Country of origin: Germany Price without VAT per unit Piece 1

Siemens SINAMICS Sensor Module SMC20 Model No.: 6SL3055-0AA00-5BA3 Item number: A5E02122667 Application: Incremental encoder (sin/cos 1Vpp), absolute encoder (EnDat / SSI) Power supply: 24 V DC, 0.6 A Operating temperature: 0 ... 55 °C Weight: 0.4 kg Interfaces: X520 (Sub-D), X500/X521 (RJ45/Multipole) Condition: used, tested Country of origin: Germany Price without VAT per Piece 8

Siemens SINAMICS Terminal Module TM120 Model No.: 6SL3055-0AA00-3KA0 Item number: A5E02274111 Type: TM120 Terminal Module Supply voltage: 24 V DC, 0.5 A Operating temperature: 0 ... 55 °C Weight: approx. 0.1 kg Manufacturer: Siemens AG Country of origin: Germany Condition: used, tested Price without VAT per unit Piece 3

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

Siemens SITOP PSU200M Model No.: 6EP1334-3BA10 Input voltage: AC 120-230 V / 4.4-2.4 A / 50-60 Hz or AC 230-400-500 V / 2.4-1.3-1.1 A / 50-60 Hz Output voltage: DC 24V/10A Temperature range: -25 ... +60 °C Weight: approx. 1.0 kg Condition: used, tested Manufacturer: Siemens AG Austria Product range: SITOP PSU200M Country of origin: Romania Price without VAT per unit Pieces: 2

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

Siemens SITOP PSU8200 Model No.: 6EP3446-8SB00-0AY0 Input voltage: 3AC 400-500 V / 1.2-1.0 A / 50-60 Hz Output Voltage: DC 48V/10A Temperature range: -25 ... +60 °C Weight: approx. 1.0 kg Condition: used, tested Manufacturer: Siemens AG Austria Product range: SITOP PSU8200 Country of origin: Austria Price without VAT per unit Piece 3

EDM machine Makino DUO64 vintage 2011.

Siemens SITOP PSU300S Model No.: 6EP1434-2BA10 Input voltage: 3AC 400-500 V / 0.6-0.5 A / 50-60 Hz Output voltage: DC 24V/10A Temperature range: 0 ... +60 °C Manufacturer: Siemens AG Austria Product range: SITOP PSU300S Condition: used, tested Country of origin: Austria Price without VAT per unit Piece 2

Output: 10000 U/h // Bottle Size: 0,5

For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

Key data: 300 mm, 200 mm, 200 mm

Specifications: Manufacturer: Sodick Type: AQ 300 L (5 axles) Year of Make: 2005 Control: Sodick LN1W Travel distances X, Y, Z: X 300 mm, Y 200 mm, Z 200 mm Travel distances U, V: U 80 mm, V 80 mm Workbench Dimensions: 750 x 500 mm Max. workpiece height: 200 mm/180 mm Max. table load: 300 kg Dimensions and weight Dimensions L/W/H: 2,400 x 1,300 x 2,210 mm Weight: 2,700 kg Condition Condition: Used Functional: Tested and fully functional The machine is in very neat condition.

Control Heidenhain X-axis travel 300 mm Y-axis travel 200 mm Travel Z-axis 200 mm Table length 600 mm Table width 300 mm Dimensions (L x W x H) 1430 x 1400 x 1970 mm Operating manuals available available now The price is net, unpackaged and freely loaded ex site. without warranty

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

The machine is in good technical condition, testing is possible after prior agreement. Machine on - 92331 h

FOR SALE - NEW PRECOMBUSTION CHAMBER + SPARK PLUG SOCKET Part Number: 438604 + 367151

for cutting machine 122 N:, Circular knife shaft complete with 91 knives - 2.8 mm cut,, Flat knife - holder without knife for 2.8 mm cut,, Round knife - shaft with nut, without knife,, Mincer shaft pitch 28 for 10 mm cubes - without knife, Complete list on request

Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible.

THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES & SPARE PARTS ARE AVAILABLE FOR PURCHASE: 1x Canon MC-30 Maintenance Cartridge 1x Toner Canon PFI-1700 MBK 1x Toner Canon PFI-1700 PBK 1x Toner Canon PFI-1700 M 1x Toner Canon PFI-1700 PM 1x Toner Canon PFI-1700 PC 1x Toner Canon PFI-1700 Y 1x Toner Canon PFI-1700 GY

The machine is in good technical condition, after prior agreement it is possible to test it. , connected = can be demonstrated in operation. Machine system completely backed up on ext. HDD. Disconnection, reconnection and possibly future service agreed with EDM (exclusive importer and seller)

Key data: 600 mm, 400 mm, 350 mm

For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

1 lot of retaining rings for exterior and interior, 1 lot of cylindrical pins and taper pins, approx. 30 kg 1 lot of shaft seals

Spare Parts for Printers and Thermoformers Consisting of :- GABLER 702/703 Complete Control Cabinet ILLIG VHW 72 Infeed Adjustment VAN DAM Vane Vacuum Pump Norgren Plugassist Cylinder Skeletal Waste Material Winder 20 x ILLIG RDM 70K Mold Parts for 68mm PP Cups 1 x Plastic Crate Polytype DDM 300 Spare Parts 2 x VAN DAM Goose Neck Cup Feeder, 1 x Inclined Conveyor Cup Feeder 8 x Plate Cylinder Assembley Polytype BDM 301R

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor N181, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

AS/RS, TGW with 2xMustang RBG's, 22,756 parking spaces, box size 60x 40x 35cm – used - : Price from location: only 99.500.-€ (net), plus dismantling etc.! Manufacturer: TGW Type: AS/RS, Year of Make: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 pieces Lanes: 3 Dimensions of the system: length x width x height: 64 x 13 x 7.90m Storage locations: 22,756 pieces Payload: 50kg/crate Load units (dimensions max.): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan is available as DWG – also further technical descriptions Stacker crane Mustang Basic unit: The Mustang single-mast storage and retrieval machine is used for automatic loading and retrieval Retrieval of containers to a high-bay or flow warehouse. This storage system can also be used to feed workstations in assembl ...

Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Key data: 500 mm, 400 mm

Roboform 350 + Erowa Robot Compackt 44-Fold Electrode Changer This die-sinking EDM machine offers precise machining with a wide range of features. Details: Year 2006 Travels: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg Accessories: incl. Erowa zero-point clamping system on table WITHOUT electrode holder

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

ALTAY V6 Type: Diesel Engine. Configuration: V-shaped, 6-cylinder. There are also other engines from tractors and trucks of Soviet production

D-65 diesel engine, which is installed on YuMZ-6 tractors Engine type: 4-cylinder diesel piston internal combustion engine. Power: 40 to 62 horsepower (29.6 to 45.6 kW). Displacement: about 4.94 liters. There are also other engines from tractors and trucks of Soviet production

Type: Diesel Engine. The engine is equipped with a turbocharger. There are also other engines from tractors and trucks of Soviet production

2 x die-sinking EDM machines Maho Hansen HS 350 E and HS 300E built in 1990

Wire EDM machine Fanuc alpha IB BJ 2002

Various spare parts for capsule filling machine BOSCH, type GKF1500.