sorting used for sale

Wet Aseptic Filling Line Krones PET 18000 bph Excellent condition Krones Dry Aseptic PET line for non-carbonated demanding products like smoothies, juices and dairy products without CO2. The line was commissioned in year 2018 by Krones and having only less than 12000 total operating hours. This line was purchased by current owner for contract filling so called Innocent Smoothies in 250ml, 360ml and 750 ml PET bottles with D38ml neck format. It has large GEA made aseptic processing plant for product treatment before filling. Blow moulder is Krones Contiform 310 PRO with 10 cavities, Contipure D preform disinfection system and for energy savings there is an infrared linear oven with ceramic reflectors and Air Wizard Plus pressurizer air recycling system. Filling and capping is made with Krones PET-Asept Bloc D, which has a wet aseptic system. Bloc contains aseptic bottle sterilizer STE ...

Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000 and more Translated with

workpiece dia.: 80 mm module: 2,5 mm fixture slide travel: 220 mm Control: Siemens - Sinumerik 840 D max. milling cutter diameter: 100 mm cutter length max.: 160 mm turning speed range: 200 - 5.000 U/min table turning speeds: 3.000 U/min Gear Hobbing Machine - Horizontal | GLEASON-PFAUTER - P60 equipped with magnetic chip conveyor for dry and/or wet machining. Furnishing: - attached exhaust system for dry processing: Ringler, - Noise insulation for dry milling machine - with platform, - subindulgence, - subsequent loading and unloading handling: Epson - LS6-602S (built 2018), - sorting unit, - Calibration unit: Stotz, control: Siemens - HMI, - Work cell: Eagle AMZ, with workpiece tray, - position check, - exit conveyor belt, - Control cabinet, with cooling unit: Rittal - coolant device, - Automation unit: AMZ, The machine is in very good condition. For additional equipment information p ...

The KT-100S hand-held metal analyzer will easily identify the most difficult alloy grades in a few seconds. The KT-100S uses Laser Induced Breakdown Spectroscopy (LIBS), enabling permanent and accurate alloy identification for use in: Scrap sorting Quality assurance in metalworking Positive Materials Identification (PMI) in mission-critical operations such as aerospace and petrochemicals Advanced identification of light elements LIBS is more sensitive and better suited to detecting light elements such as aluminum (Al), magnesium (Mg), and beryllium (Be). However, reliable analysis of materials containing these elements by LIBS has been very limited and has typically been confined to the laboratory environment - until now. The KT-100S handheld metal analyzer represents the latest technological achievements in the miniaturization of lasers and spectrometers, which have quickly expande ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Evacuators/ Infeeders/ Conveyor systems Manufacturer: Budde Year of construction: 2011 Condition: Good (Used) Colour: Blue -galvanized Total length: approx. 2500 mm Short side (ejector) : approx. 780 mm Total width incl. motor: approx. 1300 mm Straps: 18 pieces - approx. 40 mm wide Conveying width: approx. 1000 mm Stock: 2 pieces Including SEW motor (1.1 KW) Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading y ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Passage flap / retractable gate / hinged element Manufacturer: Interroll Condition: Good (Used) Model: Casters - with drive Total width incl. feet: approx. 890 mm Conveyor width: approx. 660 mm Total length: approx. 1300 mm Minimum height of the upper edge of the roll: approx. 700 mm Wheelbase: approx. 75 mm Roll diameter: approx. 50 mm Including 24 V motor Stock: 12 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading ...

Groninger plastic bottle filling & closing line for eye drops (Ophthalmic), etc. comprising ZVB 2650 fully automatic empty bottle sorting & feeding unit and DSVG 4132 fully automatic intermittent motion filling, stopper and capping machine with barrier system with laminar flow modules type ORABS with LF Units, working stations: 1. IPC Tara – 2. gassing during filling – 3. 4 filling heads (multi stage filling) with servo controlled peristaltic pumps, filling accuracy +/-0,5 % referred to volumes above 1 ml. and +/-1,0 % referred to volumes below 1 ml. – 4. IPC gross – 5. post-gassing – 6. 2-head dropper inserting station – 7. 2-head screw capping station – 8. Bottle discharge, Allen Bradly Control Logix PLC + Allen Bradley Panel View Plus 6 / 1500 HMI, includes format parts for bottles for 3 ml. (Ø 18,70 x H 28,20 mm) and 10 ml. (Ø 25,00 x H 43,65 mm), capacity up to 120 b ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Webbing Curve/ 45 Degree Curve/ Conveyor Curve Year of construction: 2011 Manufacturer: Interroll Condition: Good (Used) External length: approx. 2100 mm Inner length: approx. 800 mm Total width incl. motor: approx. 1500 mm Total width without motor: approx. 1300 mm Belt width: approx. 1050 mm Conveying width: approx. 1000 mm Height of the side guide: approx. 200 mm Material: Steel/ Aluminum Color: Galvanized Blue Including SEW motor (0.75 KW) Including side guide Stock: 3 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics  ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller conveyor with drive/conveyor conveyor Manufacturer: interroll Condition: Good (Used) Drive Type: Vertical Shaft approx. 42 linear metres available Plant consists of 14 segments -of which 6 are drive units (SEW motor (0.37 KW) Segment data Total width: approx. 535 mm Conveying width: approx. 455 mm Roll diameter: approx. 50 mm Wheelbase: approx. 75 mm Aluminum frame Frame height: approx. 120 mm Frame width: approx. 40 mm The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, incl ...

Pallet lift table/ pallet turner Manufacturer: Overbeck Year of construction: 2014 Condition: Good (Used) Drive Type: Chain Drive Total length: approx. 1300 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roll width: approx. 945 mm / Effective width: approx. 880 mm Roll diameter: approx. 80 mm Rolls: 7 pieces Axle spacing of the rollers: approx. 200 mm Stock: 2 pieces Price per piece The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or teles ...

Used Filling Line For Pet Bottles YOM 2001 Sipa blower equipment is in working condition still running till the end of the year These Used Filling Line For Pet Bottles are in good working condition It is possible to see all the machines in operation by the end of 2022 1 Sipa blower equipment type SF 8 4 893 year of manufacturing 2001 capacity 2L 4 000 bottles h inclusive Preform silo elevator and sorting unit inclusive in this Used Filling Line For Pet Bottles Industrial Frigo chiller Model GR2A 40 2004 2 Air conveyor system from outlet Sipa blower equipment machine to the inlet of the Radenska triblock The air conveyor system is pneumatically adjustable 14m Filling part of the line 3 Tribloc Radenska 24 48 5 Type T48 48 RP 24 N05 with 24 rinsing stations 48 filling valves and 5 capping for plastic screw caps year of manufacturing 1993 4 Complete bottle conveyor system 5 Foil shrinking m ...

General SKU321U768 LocationBarneveld MakeS+S Seperation and Sorting Technology TypeRX9-E-0300-M No.025613 Mach.No.025613-0717-2510 Main Features MaterialStainless steel Motor0.25 KW Dia/Width300 mm Specified Features - Metal detector MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Product spaceDia: 300mm With motor0,25kW, 230/400Volt, 1350rpm InletDia: 300mm OutletDia: 300mm Information Year of construction2007 Weight170 kg CEcheck Floorspace1,3x1,4 m Total height1,07 m Extra SpecificationsThis magnetic separator can, for example, be used for removing contamination from nutrition powder or lithium powder. Metal detectorsS+S SesotecPackaging machines > Metal detectorsBrand > S+S Sesotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...

Used Filling Monoblock for Wine Bertolaso 15000 BPH 2001 Rinser Automatic CALIPSO 63mm 2 450mm rotary rinser with 63 spray nozzles that penetrate 90mm deep into the bottle 2 channel rinser for steam sterilisation Support structure completely covered with AISI 304 stainless steel sheets AISI 316 stainless steel gripper elements with jaws made of food grade material AISI 316 stainless steel spray nozzles and spray valves Stainless steel drip tray with drain line pressure reducer for rinsing agent total treatment time at 15 000 bph 12 seconds Filler Low vacuum filling machine model ENOICA 72 2800 mm with 72 filling valves Ring bowl completely made of stainless steel AISI 304 bowl bottom with slope filling valves completely made of stainless steel AISI 316 Electric filling bowl height adjustment by push buttons on the control panel of the machine Electronic filling level probe Endress Hauser ...

General SKU032U183 LocationBarneveld MakeSuperior B.V. TypeSZV 800/5/6 No.8671 Year of construction1991 Main Features MaterialStainless steel Surface0.3 m2 Size length580 mm Sizes width480 mm Specified Features - Vibro sieve Vibro sieve/Sorting- and dewatering sieve (1x) Sieve surface0,28 M2 Number of sieve decks:4 Sieve sizes580x480mm With covercheck Inletdia. 100mm Outlet5x dia. 75mm + water outlet Drive vibro motorcheck Motor2x 0,4 KW, 220/380 Volt Sieve perforationdeck 1= 7,0mm, deck 2= 6,0mm, deck 3= 5,0 mm, deck 4= 4,0 mm MaterialStainless steel Information Mounted on mild steel framecheck Floor space1,3x1,0 m Total height1,2 m Weight400 KGMinerals & inorganicPlastic & rubberPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarOrganicsOther pharmaceuticsGeneric medicinesPowdered foodsConsumer wasteVibro sievesPaper &  ...

Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225 - rotating head 360 - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5 x 2.4 x 2.4 m weight 12000 kg

Complete production lines of Dornow various potato peeling machine Very interesting for e.g. potato producers or potato processing companies from the food industry, who could market their products directly to large customers. Machine We only sell the entire production line. It is a potato or tuber peeling unit consisting of: Conveyor belt Stone catchers, Roller peeling machine with an hourly output of 2t. 10m < for sale. However, these are not included in the price. It is a private sale, so no VAT. can be shown. More photos on request

Vegetable cutting and washing line consisting of: Product elevator by means of plastic belt with buckets. Dimensions: 2740 x 200mm useful Model: EV-2740X200 Cutting, slicing and dicing machine for vegetables (potatoes in its last application) with continuous working system for uninterrupted production. Three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140 mm) in any dimension. Cuts cubes or smooth or corrugated strips, three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Slices: 1/16 - 3/4 (1.6 - 19.1 mm) Cubing: A combination of the slicing blade, crosscutting blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjustin ...

Belt press POWERPRESS 400 is designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders + Fruit and Vegetable Washer Elevator Mill MAXIMILL 1000. # Pour jus de pomme, jus de raison, jus dorange, jus de poire, jus dananas, etc. The obtained juice flows in the collection tray under the press. The pressing process is continuous. Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. Bel ...

Marel Grading line consisting of: DWU 225 weigher Serial No: A002514 C 300/460 Sorting conveyor - 10 pots Serial No: A002566 300mm wide belt - Intralox Modular

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: commission trolley -Chassis: 4 swivel castors -Dimension: 1515/900/H1640 mm -Weight: 83 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: commission trolley -Cross braces: with 2 adjustable brackets -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 800/780/H1480 mm -Weight: 57 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: Commission trolley, floor trolley -Tiers: 4 borders arranged diagonally -Border dimensions: see photos -Chassis: 2 swivel castors / 2 fixed castors -Total dimensions: 810/500/H1650 mm -Weight: 69 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile racks, support arm trolleys -Magazine trolley: transport trolley with visible storage boxes -Transport trolley: 950 x 750 mm -Open storage boxes: 9 pieces 715 x 465 x H300 mm -Levy/Price: complete -Total dimensions: 950/750/H1610 mm -Weight: 67 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: Commission trolley, floor trolley -Tiers: 9 borders arranged diagonally -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 1000/800/H1700 mm -Weight: 103 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: Commission trolley, floor trolley -Tiers: 2 borders arranged diagonally -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 810/500/H1645 mm -Weight: 63 kg

Laser for cutting pipes and profiles ADIGE LT 722D is in good technical condition. By agreement, it is possible to see under the current. It can cut open and hollow profiles up to a length of 6500mm, with min. 10mm max. diameter 120mm. Automatic unloader for processing products with a length of max.: 4500 mm with the possibility of sorting products. Cooling equipment, extraction equipment, documentation for the machine. Regular service and prescribed maintenance. Operating hours Status 01/19/2024 – Computer: 87,001 h; High Voltage: 80.260 h; Counter: 81,444 Machine weight: 9000 kg Laser power: 2500 W Max. workpiece weight: 100 kg Pipe size max.:: D 140 mm Size of profiles min - max.:: 30x20 - 120x80 mm Automatic loader for processing bars with a length of max.: : 6400 mm Machine dimensions lxwxh: 10514x4600x2237 mm

Used capping machine Clean Pack up to 2500 bph Machine Specifications Firstly the CLEAN PACK brand capper features a single head configuration specifically designed for applying T caps Importantly this technical choice allows for precise cap placement which is essential for ensuring the integrity of the bottled product Moreover the cap distribution system operates through vibration mechanisms an effective method for sorting and feeding caps to the capping device without interruptions Speed Adjustment of the Used capping machine Clean Pack up to 2500 bph Secondly the production speed of the capper is adjustable via an inverter This allows fine control of the capping rate tailored to the desired production rhythm Consequently this adjustment capability proves particularly useful in dynamic production environments where requirements can quickly change Configuration and Safety Additionally t ...

SMH Trading Company Belt Conveyor/ Conveyor Belt/ Webbing Year of construction: 2010 Manufacturer: SMH Trading Company Model: FBK 5000 x 1000 Condition: Used Colour: Dark Green/ Aluminium Total length: approx. 5080 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 1050 mm Belt width: approx. 1000 mm Strap Type: Smooth Frame height: approx. 80 mm Material: Aluminum/ Steel Engine included Feet included (height adjustable) The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, ...

Overview The Krones Contiform 3 stretch blow moulder was manufactured in 2015 and installed in a mineral water company in Germany to replace an older contiform. As most other machines of this line are already older, the owner decided to stop production. Due to this, the machine has less than 3900 operating hours and is in excellent condition. With the machine, there are two sets of blow moulds (nine moulds in each set) The documentation and program backup are also available. In addition to the blow moulder, there is the preform kipper, hopper, alimentation and sorting. Tech Specs: Capacity: up to 18,000 bph Number of blowing stations: 8 Max. container volume: 3,0l Operating hours: < 3900 h Integrated power recovery Additional Equipment: Blow moulds for 0,5l; 1,0l  Preform feeding system Technical documentation Air conveyor

Belt Conveyor/ Conveyor Belt/ Webbing Year of construction: 2010 Manufacturer: ttw-Thermo-Technik Model No: 1002229 Condition: Used Colour: Galvanized/ Green Total length: approx. 3060 mm Total width incl. motor: approx. 1040 mm Total width without motor: approx. 890 mm Belt width: approx. 800 mm Strap Type: Smooth Frame height: approx. 80 mm Material: Aluminum/ Steel Engine included Feet included The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and  ...

Technical data baler: Manufacturer Presona Type LP 40 EH1 PET Year of construction 1998 Operating hours 37,884 hours, data according to operating hours counter, as of March No. of bales pressed 311,714 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 15 kW Connected load, total 18 kW Absicherung min. 50 A, max. 63 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective t ...

Technical data baler: Manufacturer Presona Type LP 40 EH1 Year of construction 1995 Operating hours 16,917 hours, data according to operating hours counter, as of March No. of bales pressed 28,745 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 18,5 kW Connected load, total 26 kW Absicherung min. 62 A, max. 100 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective tra ...

Monobloc rinser-filler-screw capper consisting of:  Rinser with 16 nozzles Filler with 16 filling valves Screw capper with 4 capping heads with sorting unit and chute for a Long cap Capacity: approx. 3000 bph Formats included - 1 litre D84mm H310mm - 0.75 litre D75mm H330mm  - Magnum D95mm H480mm More then 300 machines new and second hand on our seema .de

OPTICAL SORTING UNIT, To sort different colors of PET HDPE PP PVC PC ABS PMMA and more, Customizable from 1 to 6 channels, High precision and smart technology which uses A.I.to grant excellent performances., The best cost-effective deal you can find to improve your final product or create a new business., Very quick assistance if needed, Compact and versatile machine, available from 0,940 .up to 2,7 mt. wide (L x H: 1,8 x 1,8 mt.), For a variety of different uses, this machine can separate parts as small as a salt grain and as large as a walnut so increasing the value of your reground plastic scraps ., The control panel with its touch screen allows full customisation on different materials and colors., The 16 million colors high resolution digital cameras gives extremely high performances and can recognize down to 0,09 mm.large defects., The NIR cameras allow to detect stone, glass, soil ...

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: No, Total length: 1,800mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Mains connection: 230 VAC, 50Hz, Documentation: 1 x German paper

used for filling sliced and blanched mushrooms,, consisting of:, MURZAN - pump, type MUS-10, drip tape, LEONHARDT - filling machine, type AG1 DPE 150, year 1997, with a filling station, FURUKAWA, Old - Rivers - Pre-made Bag Packing Line, Ty FVV-8-275E, takes pre-made bags from a magazine, opens them, is filled via the Leonhardt,, a slight vacuum is drawn and the pouch sealed., Functionality:, The product is pumped with the Murzan pump from a storage tank onto a drip belt., The water is fed back into the tub via hoses because it is needed for pumping., The drip belt is designed in such a way that up to 4 employees can stand on the right and left, for example to be able to carry out sorting work., The product then falls into the funnel of the Leonhardt filler. Here there is another possibility to let the residual water run off before dosing., The product is conveyed forwards via the integr ...

automatically, a closing station in rotation. , Drive: 1.5 kW, Generation of the vacuum by means of a vacuum pump, with closure sorting, with device for TO 53, TO 66, TO 82, format parts for glasses with diameter approx: 60, 64, 70, 78, 90 and 102 mm (65ml, 125ml, 275ml and 1,062ml glasses),, Output: up to a maximum of 1,200 glasses per hour.

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: for open-fronted storage bins, double-sided -Both sides: 90 boxes / total 180 boxes -Swivel castors: with parking brake -Dimensions: 1000/500/H1690 mm -Weight: 70 kg

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: Transport trolley with open storage boxes, solid design -Transport trolley: 1425 x 640 mm -Storage compartments: 64 pieces, 32 pieces on both sides, some with open storage boxes -Base: 4 swivel castors -Total dimensions: 1425/640/H1460 mm -Weight: 225 kg

Description: With 7 drawers Including plastic sorting trays with ,transport frame Approx. Onsite Dimension. (l x w x h): 740 x 710 x 1,020 mm, weight approx.: 60 kg

Key data: 400 kN

Arburg 270S 400-70 / Very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 22 mm Spray weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 270x270 mm Size of clamping plates: 380x380 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Built-in conveyor belt and sorting flap Metrics: Weight: 2040 kg Length/Width/Height: 3.35x1.24x1.83 m Drive: Pumps/motor: 11 kW Heating capacity: 4.1 kW Total power: 15.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...

Key data: 500 kN

Arburg 320A 500-170 with the sprue picker / electric machine Year of construction: 2005 Injection unit: Screw diameter: 35 mm Spray weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit hardened - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Metrics: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the select ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann WP80 sprue picker Year of construction: 2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection A new injection unit is installed in the machine Built-in conveyor belt and sorting flap Sprue Picker Wittmann WP80 Year of construction: 2016 Travels in axes: X-100, Y-550, Z-90° Touch control panel Purchase of the sprue picker for an extra charge Metrics: Weight: 2400 kg Length/Width/Height: 3.41x1. ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...

Key data: 600 kN

Arburg 320C 600-250 / Machine in very good technical condition Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine Has Produced Molded Parts For Medical Industry - Pure Production Conditions Core Pull Control Injection unit hardened - Bimetal Built-in sorting flap Metrics: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected  ...

Key data: 800 kN

Arburg 370S 800-350 Year of construction: 2000 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 370x370 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap Robot Interface Hydraulic core pull x 2 Injection unit hardened - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Metrics: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company i ...

Key data: 1000 kN

Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 172 g Spraying pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machines are st ...

Key data: 700 kN

Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of construction: 2009 Injection unit: Screw diameter: 30 mm Spray weight: 65 g Spray pressure: 1390 bar Dosing volume: 71 ccm Clamping unit: Clamping force: 70 t Tie bar spacing: 370x370 mm Size of clamping plates: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Machine Operating hours: 33,544 in automatic mode Euromap 67 Robot Interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced Injection Units - Bimetal Proportional valves on spray units - precise spraying Parallel Movements The vertical injection unit - screw diameter fi 20 mm (29 g/PS) Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Machine with buil ...

Key data: 1000 kN

Arburg 420C 1000-350 / Very good technical condition Year of construction: 2002 Injection unit: Screw diameter: 40 mm Spray weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit : Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 10 Injection unit hardened - Bimetal The machine is integrated with the original Arburg conveyor belt Built-in sorting flap Metrics: Weight: 3430 kg Length/Width/Height: 4.35x1.64x2.08 m Drive: Pumps/motor: 22 kW Heating capacity: 10.2 kW Total power: 32.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests  ...