sorting used for sale

Metal sorting system for small scrap and bulk materials, metal recycling, ash recycling used Manufacturer: GEODUR with eddy current separator for non-ferrous metals Dimensions: approx. 10 x 2.5 x 3 m This is a larger semi-mobile sorting plant Formerly used to process ash, bottom ash / slag from waste heating plants / incinerators / smelting plants by means of this sorting plant in order to separate metals and other fractions from it Can also be used to sort / separate sand and stones. Metals were sorted by means of Überbangamnet. Non-ferrous metals by means of non-ferrous separators / eddy current separators This line also includes other plant components, overbelt magnet, sieve sorting machine and conveyor belts with steel structures We are in the process of setting up the line in such a way that you can see the entire circumference compared to this plant Search  ...

An X-ray sorting machine for jars in the food industry is available. Sorting width: 500mm, machine dimensions X/Y/Z: approx. 2300mm/1900mm/2200mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.

Stock number: F680, Capsule out sorting,, Motor-driven carousel., With control panel and frequency steering., Ø 800 mm.

Stock number: F709, Capsule out sorting,, Rationator CS 650., Motor driven Carrussel,, With control panel and capsule guide., Ø 650 mm.

The used Fraunhofer sorting system from 2007 is ideal for removing bad parts from bulk materials such as dry and shredded plants. The system uses a color-capable line camera that scans 20 million pixels per second. This enables precise detection with a conveyor belt width of 500 mm and a speed of 2.5 m/s, with 16 pixels per mm² being recorded. The continuous display of the bulk material image shows color-coded bad parts, and the system is intuitive to operate. Defective parts are blown out approx. 100 mm behind the measuring line using air nozzles. In 2019, the system was optimized by replacing the camera, control cabinet and valve block. The system has an output of approx. 60 to 160 kg per hour, depending on the product.

It is a functional sorting belt made of stainless steel (V2A) Width: 75cm Band height: 64cm Highest point: 115cm Length: 350cm If you are interested, please contact us.

For sale is a system that was used for the sorting of frozen fruit for the foreign body rejection. The system then weighs and packs them into tubular bags. Functional sequence: Transport via incline conveyor to the vibrating table for separating the fruits. The fruits then reach the BEST laser system LS 9000, which detects foreign bodies and blows them out by means of approx. 80 air nozzles. Lasers can be reprogrammed by running so-called good goods, i.e. goods without defects, through the machine. The laser recognizes the surface structure on the basis of a point cloud and thus knows what is good or bad goods. The product then goes to the conveyor belt with metal detector and visual inspection Finally, the fruits are transported again via an incline conveyor for weighing and filling into tubular bags. Weight per bag can be between approx. 10 to 25 kg. Docume ...

vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 Fpobmafvewav R Sjpxok vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition!

E+K SORTIERSYSTEM EMSE-55GU 800mm stainless steel vibratory feeder bowl feeder make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Transnorm accumulating roller conveyor with ejector 3820-700-645 RA2279 Make: Transnorm Running direction: both directions Roller width (RB): 645 mm Nominal/outer width (NB): 700 mm Length: 3820 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, WA20/T DR63L4/TH and 24 V drum motor Electrical data: V 380, kW 0.25/S1 Frame height: 120 mm A total of 6 modules available with 2 dischargers each. price per element There is a storage space between each discharger as a buffer Conveying speed: 0.33 m/s Optionally available: Supports Side guides on one and both sides Frequency converter for stepless speed control Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 380-500V Conveying length in mm: 3820 Nominal / outside width in mm: 700 Roll width ...

Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 190 kg,

A Probat coffee grading machine for sorting out defective coffee beans is available. Machine dimensions X/Y/Z: approx. 1200mm/1000mm/1800mm, weight: approx. 450kg. An on-site inspection is possible.

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock

NEW, 140 kg net weight, suitable for 1.5 - 4 t excavators, oil flow for excavators 15 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

TECHNICAL SPECIFICATIONS Manufacturer: BOREMA Umwelttechnik AG Description: Manual sorting system Version: with feed hopper, conveyor technology, overbelt magnet Year of construction: 2024 Material: KVA pre-sorted, combustible waste Feed size: approx. 0-500 mm Required capacity: approx. 5.0 t/h FACILITY CONSISTS OF: 01) Vibratory Conveyor SFLU Dimensions (LxWxH): 5,000 x 800 x 250 mm Hopper volume: approx. 5 cbm 02) Climbing Tape FB Conveyor belt length: 3,000 mm Conveyor belt width: 1,000 mm Inclination: approx. 20° Drive power: 3 kW Rubber Belt: Supergrip 03) Permanent overbelt magnetic separator IMP Z-120 Material: magnetic FE metals Drive power: 2.2 KW, 400 V, 50 Hz 04) Sliding belt conveyor FB, manual harvest Conveyor belt length: 6,500 mm Conveyor belt width: 1,000 mm Drive power: 3 kW Hand sorting area: Lining with wood 05) Swivel Sliding  ...

NEW, 140 kg net weight, suitable for 1.5 - 4 t excavators, oil flow for excavators 15 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

NEW, 690 kg net weight, suitable for 7 - 16 t excavators, oil flow for excavators 45 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

NEW !, 2024 Mustang GRP1000 Demolition & Sorting Grapple, 990 kg, Suitable for 13-19 t excavators, Required dredging power: 300bar, Oil flow rate of the excavator: 50 l/min, Grapple capacity: 70 bar, Oil flow rate of the grapple: 30 l/min, Many more grapples available!

Screwing plate / hammer plate / demolition grapple plate / sorting grapple plate suitable for Hammer and Mustang GRP250 and GR25

Mustang GRP1500 demolition & sorting grapple, Technical specifications:, - Year of construction: 2025, - Dead weight: 1250 kg, - Suitable for 17-23 t excavators, - required excavator power: 300 bar, - Excavator oil flow rate: 75L/min, - Gripper capacity: 70 bar, - Gripper oil flow rate: 30L/min, Many more grippers available!

NEW, 1640 kg net weight, suitable for 22 - 31 t excavators, oil flow for excavators 90 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

Mustang GRP450D demolition & sorting grapple, Suitable for 5-12t excavators, With hydraulic rotator, 60cm AB, 145cm opening width, 50cm gripping height when open, Transport dimensions:, - 200cm length, - 70cm wide, - 125cm height, - 600kg

Sorting/Cutting Table

Mobile sorting table Cycle Sort Type B BJ 2025

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible.

A Meyer color sorting system for the optical separation of small grain sizes in the food industry is available. Chutes: 10, cameras: 20, camera type: RGB 5400 CCD, compressor power: 37kW, compressor delivery rate: 7.1m³/min. Including integrated stainless steel container, refrigerant dryer and screw compressor. The conveying elements were integrated used and may need to be renewed if required. Documentation available. An on-site inspection is possible.

• Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, according to format set • Output approx. 6000 bottles/h • With format set for round bottles Ø 24 mm x length 52 mm • Feed hopper with lifting device, • Aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) • 240V/50 Hz

PAPER CARTON SORTER good condition Available now! cheap to give away

Cimbria S.r.l. colour sorting machine, model: CHROMEX-3 TN-TR, serial number: CX3-TN-TRC1680-17, year of construction: 2017, 230 V, 1 Ph, 50-60 Hz, weight: 1060 kg, 6 digital color cameras and additionally 3 NIR and 3 NIR InGaAs cameras for best possible detection, 2 CCD cameras per chute for real color detection, 4,048 pixels, camera resolution 0.07 mm/pixel, number of nozzles: 162, nozzle spacing: 5 mm, automatic interval cleaning of the detection system, chute width: from 810 mm, total dimensions: 1800 mm x 1100 mm x 2300 mm.

2 units air classifier type Nihot - 2 x 2 pieces blower - 2 x 1 piece airlock cheap to show off

• Sorting insert diam. 650 mm made of stainless steel • Frequency control unit • Adjusted for cap diam. 28 x h 12 mm • Plastic housing • Height adjustable • Electr. connection 230V/50Hz

Coin counting and sorting machine SAFEscan 1250 EUR, SN 113054721170480

Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own

Type NRO mini completes with:- Control console (400V 3PH+T) completes with CPU- Photocell at the corker- Electro mechanic device of orientation- Device for signalling emergencies and/or anomalies- Pneumatic rotor for the orientation- Flap door opening sideways in the hopper- Safety guard in shaped lexan, complete with safety contact- Hopper, capacity 110 litres with closing coverM

Waste recovery and sorting plant for sale in Barcelona, Spain On behalf of CLD Corporation, TEGA Industrial Assets announces the sale of a complete waste recovery and sorting plant located in Barberà del Vallès, Barcelona, Spain. The sale is due to a change in operations at the site. The plant was installed in 2022, has very low working hours and is in excellent condition. It is designed for the treatment of mixed non-hazardous waste and commercial and industrial waste through an automated sorting, classification and material recovery line. The facility has a nominal capacity of 11.42 tonnes/hour and includes equipment from leading European manufacturers, including PICVISA, NIHOT, SPALECK, GÜNTER, FELEMAMG, SPR and others. Main equipment includes a shredder/bag opener, feeders, screens, optical sorters, densimetric separator, magnetic separators, eddy current separator and ma ...

Equipped with: DEHACO DSG 1200, weight:1500 KG, suspension:CW 40, hoses, quick couplings, 2 hydraulic motors, 2 hydr. cylinders, welded blades, 360º hydraulic rotation, due to the special cylinder arrangement and the equator they move minimally, causing virtually no wear on the internal hoses. Auction-ID: A1-40139-168

Equipped with: MB Crusher MB-G600 S4 sorting grab (year 2025) with a weight of 625 kg, hydraulic system with maximum working pressure of 300 bar, type \"pinza movimentati\" (sorting grab) and serial number 35664. Auction-ID: A1-40139-183

Sorting belts - Ref - 4382 Manufacturer: Transmatic Model: NC Year: 1993 Serial Number: NC Documentation: present Overall dimensions (W x D x H): 2370 x 800 x 1770 mm Weight: 430 kg Tested and functional used sorting belts Sold EXW Auction-ID: A1-47051-69

Complete industrial logistics conveyor and sorting installation manufactured by SIILog. Consisting of roller conveyors, powered roller sections, inclined conveyors, accumulation conveyors, transfer sections, conveyor curves, elevated structures, access platforms and steel support frames. Originally installed in a warehouse/logistics environment for internal parcel and goods handling operations. The installation includes: Motorized roller conveyors Gravity roller conveyors Inclined conveyors Conveyor curves Accumulation sections Transfer modules Steel support structures Walkways and operator access platforms Electrical motors and drive units Sensors and control components visible on site Approximate build/project period visible in documentation: 2017. Condition: Used industrial condition Previously operational before dismantling/preparation Visual wear from in ...

Equipped with: demolition sorting grab, width 970, Max opening 1900mm, height to head plate 1300mm, screw-on blades, without rotation and head plate, outer dimensions mounting ring 600mm, 20 pieces mounting holes, operating weight excavator: 12 - 20 t, weight without mounting plate: 1.070 kg, closing force: 46 kN, capacity scales: 500 l, setting values opening/closing: max. 350 bar, opening/closing: 120 l/min, opening size: 1.950 mm, height (open): 1.245 mm, height (closed): 1.456 mm, width (closed): 1.175 mm Auction-ID: A1-40140-201

Manufacturer: HÄNER Baumaschinen GmbH (Germany) Type: HSL70-1400A Equipment Type: Screening Bucket / Sorting Bucket for Excavator Year of Make: 2025 Serial Number: 25006070 Model HSL70-1400A Volume (SAE) 650 litres Weight 500 kg Recording Pin system Bolt diameter Ø 70 mm Pin-to-pin spacing 463 mm Inner width receptacle 285 mm Year of construction 2025 Suitable for excavator class approx. 6–9 tons Auction-ID: A7-46429-2063

A sorting machine is for sale, letters, brochures and magazines can be sorted. At the moment an SBS is defective and therefore the machine no longer starts. The machine is therefore sold as non-functional. Some parts have been renewed (belts, light barriers, display, to name a few.) A forklift is available for transport.