sorting used for sale

Description: Bed Milling Machine Brand: Soraluce Type: Soramill SL 5.000 Control: Heidenhain TNC 415 B Year of construction: 1995 Table length: 5,000 mm Table width: 800 mm X: 3,500 mm Y: 900 mm Z: 100 mm Intake: ISO 50 Rapid traverse: 12 m/min Speed: 2,000 rpm Feed: 5 - 10,000 mm/min Colour display Coolant treatment CNC controlled milling head Indexing per 2.5° Clamping conveyor Motor: 22 kW Power: 22 kVA Milling head is 100% reconditioned weight approx.: 16,500 kg, Approx. Onsite Dimension. (l x w x h): 7,250 x 3,900 x 3,200 mm

Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Comm ...

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2007 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, not on stock

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2003 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock

- Producer Cefla / Sorbini - Type T / 20-SP-1 - Year of construction 1997 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 174 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1640 mm - Width 2590 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 4,5 kW - Weight 2.000 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, not on stock

- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2005 - Working width 1.300 mm - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %

- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2007 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %

• Sorting insert diam. 550 mm made of stainless steel • Frequency control unit MFS 168 • Oscillation 3000 • Plastic housing • Height adjustable • Mobile • Electr. connection 230V/50Hz

This 3-Axis CNC milling machine, the SORALUCE Soramill SL 4000, was manufactured in 1995. Featuring a CNC-415-Heidenhain control type and ISO 40/M16 spindle holder, it offers a spacious work area with traverse paths of x 2500 mm, z 900 mm, and y 1600 mm. With 30 tool stations and a weight of approximately 14.5 tonnes, it ensures robust performance for milling and drilling tasks. Consider the opportunity to buy this SORALUCE Soramill SL 4000 milling machine. For further information, contact us.

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1000 mm total power requirement: 22 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 10.000 x 6.000 x 4.250 m Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-axis CNC horizontal milling centre SORALUCE - Sora 2 Control system: TNC 426 Spindle speed rpm: 15-3000 Clamping surface mm: 2360x1000 XYZ: 2000x1200x1000 C-axis 360° Max. load kg: 5200 Spindel: SK50 Weight to: 16.8 Wz. magazine 30 seats Rotary table (C-axis) - swivelling horizontal / vertical Swivelling head - swivelling horizontal / vertical Measuring probe integrated in control unit Available: July 2024 Find more here - / Contact us at -

Description: Brand: Soraluce Type: Soramill 4 TF4 Year of construction: 1995 Table dimensions: 4,000 x 1,000 mm X: 4,000 mm Y: 1,000 mm Z: 1,500 mm Taper: ISO50 Speed: 3,000 rpm Huron freewheel Motor: 22 kW weight approx.: 25,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 6,000 x 4,250 mm

x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm Control: Heidenhain TNC 426 total power requirement: 74 kW weight of the machine ca.: 16,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SL 6000 with a TNC415 control. Year of manufacture: 1992 Travels: Lenks X 4500 mm, Vertical Z, 1000 mm, Cross Y 900 mm Motor power: 22 kW Speed: 5-2000 rpm We would like to sell the machine. The following things are new on the machine: ball screw X-axis, air conditioning door, screen, main spindle motor (overhauled) and Simodrive 611. The machine has an E-Prom error on the control. Machine is without Swivel head Find more here - /

SORALUCE is the most important machinery manufacturer nationwide. He has more than 50 years of experience and is part of DANOBATGROUP,one of the most relevant business groups on the European scene. In fact, SORALUCE manufactures any type of milling machine: bed type milling machine, milling machine gantry, brige type milling machine or travelling column milling machine. The SORALUCE TA-25 fixed bed milling machine A that we currently have in inventory, presents all the possible extras that a milling machine with these characteristics can have. That is, it has an automatic head with a precision of 2.5º-2.5º. It has a perimeter fairing that covers the entire machine, so that it prevents all the shavings and coolant from splashing onto the operators or ending up outside the machine. Likewise, this second-hand SORALUCE TA-25 A milling machine has a chip collector, internal cooling, paper ...

Producer: Sorgo Description: -Sorgo Smokehouses -One room for two trolleys -One main door -Powered by steam -Dimensions; 1450 mm x 2480 mm x 2700 mm -Higth needed to install 3100 mm -Total weight 1380 kg -Steam conection: 2-4 bar -Water conection: 4 bar -Air conection: 6 bar/40l/h -Electric conection; 3/MP, 50 Hz, 380 V, 220 V -Smoke generator dimensions; 1350 x 450 x1100 -Work options; drying, cooking, cooling, smoking, infusing -Seting control by mikroprocesor Mikster (brand new) with warranty -In excelent condition 2 machines available.

Table length: 6000 mm Table width: 3000 mm Longitudinal X: 6000 mm Cross Y: 3600 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 SORALUCE - FR 6000 Floor Type Milling Boring Y-Travel 3600 mm MACH - ID 6361 Make: SORALUCE Type: FR 6000 Control: HeidenHain TNC 426 YOP: 1999 X-Axis    6.000 mm Y-Axis    3.600 mm Z-Axis    1.500 mm Table Length      6.000 mm Table Width        3.000 mm Table load           20.000 kg Power on spindle       35 kW Spindle speeds           3000 Rpm Spindle Taper             50 ISO/Bt/Mk Feed rate X-Axis        12.000 mm Feed rate Y-Axis        ...

Table length: 3860 mm Table width: 1200 mm Longitudinal X: 3500 mm Cross Y: 1600 mm Vertical Z: 1200 mm Positions ATC: 30   CNC Brand: Heidenhain Bed type milling machine SORALUCE - TR 35 MACH-ID 8606 Make: SORALUCE Type: TR 35 Control: HeidenHain iTNC530 Year: 2002 17.04.2023 new milling head for EUR 20.000 Tool changer with Sk50 tooling holders 30 units Measuring probe 3D 4e Axis NC-ROtary table 800 x 800 mm X-Axis 3500 mm Y-Axis 1600 mm Z-Axis 1200 mm Table Length 3860 mm Table Width 1200 mm Table load 5000 Power on spindle 28 kW Spindle speeds 4000 Rpm Spindle Taper 50 ISO/Bt/Mk Feed rate X-Axis 15000 mm/min. Feed rate Y-Axis 15000 mm/min. Feed rate Z-Axis 15000 mm/min. Millinghead auto-index 2,5 x 2,5 °

Table length: 14000 mm Table width: 2000 mm Longitudinal X: 14000 mm Cross Y: 2100 mm Vertical Z: 1500 mm Positions ATC: 1   CNC Brand: Heidenhain CNC Model: He Bed type milling machine SORALUCE - FP 14000 MACH-ID 8761 Make: SORALUCE Type: FP 14000 Control: HeidenHain iTNC530 Year: 2010 FP Model ideal for variety of application Medium-Large size Components Floor type milling boring machine High dynamics with speeds of 35M/Min INA linear guiding system&nbsp; Hydro mechanical clamping slides Orthogonal milling head for machining at any desired angle X-Axis: 14000mm Y-Axis: 2100mm Z-Axis: 1500mm Table Length: 14000mm Table Width: 2000mm Table load: 50000 Power on spindle: 43kW Spindle speeds: 5000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Millinghead auto-index:Orthogonal 1 Gr° ...

Table length: 4000 mm Table width: 2500 mm Longitudinal X: 8000 mm Cross Y: 1500 mm Vertical Z: 2600 mm Positions ATC: 60   CNC Brand: Heidenhain Bed type milling machine SORALUCE - FP 8000 MACH-ID 8760 Make: SORALUCE Type: FP 8000 Control: HeidenHain iTNC530 Year: 2012 FP Model ideal for variety of application Medium-Large size Components Floor type milling boring machine High dynamics with speeds of 35M/Min INA linear guiding system&nbsp; Hydro mechanical clamping slides Orthogonal milling head for machining at any desired angle Rotary table RUCKLE 2500 x 2000 x 20 Ton ATC 60 Positions IKZ 1000 Liter 20 bar&nbsp; 3D measuring probe M&amp;H Chip conveyor Under power 10.2024 X-Axis: 8000mm Y-Axis: 1500mm Z-Axis: 2600mm Table Length: 4000mm Table Width: 2500mm Table load: 50000

Manufacturer: Sorbini Lackersatzwalze Moosgummi 1300 mm gebraucht muss geschliffen werden, Sorbini: yes, Roller rubber coating: Moosgummi defekt, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: ca.210,

Manufacturer: Sorbini Moosgummiwalze, Sorbini: yes, Rubber coating length cm: 1298, Shore Härte: Moosgummi alt,

Vehicle rack, commercial vehicle equipment, sortimo block, equipment block -Manufacturer: Sortimo, vehicle rack vehicle equipment with vice -Type: unfortunately without type designation -Mounting kit: BFE215 -Vice: clamping jaws 120x25 mm, span 170 mm -Dimensions: 1720/380/H1500 mm -Weight: 88 kg

Soraluce TA-35A CNC Bed Type Milling Centre CNC : HEIDENHAIN iTNC 530 HSCI Main Drive Number of spindles 1 Spindle speed range 20-4000 Spindle motor power 28 kW Number of axis 3 Movement X-Axis Movement 3500 mm Y-Axis Movement 1250 mm Z-Axis Movement 1200 mm Table Outer length 2700 mm Outer width 1000 mm Number of tslots 6 x 22 H12 This SORALUCE TA-35A Milling machine was manufactured in 2015 in Spain. It is equipped with a HEIDENHAIN iTNC 530 HSCI (3 axes + spindle) Rotatable remote unit control pendant with joint. Includes a 19 flat screen, metallic keyboard with integrated mouse, and USB interface at the control panel. Processor speed 0.5 ms included too. Interpolation turning with HEIDENHAIN iTNC 530 consisting of CAM system, HEIDENHAIN post-processor, software adaptation C-axis. The machine has Portable electronic handwheel HEIDENHAIN HR 410 with 3 m spiral cabl ...

Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.

Soraluce TR1-1600 radial drilling machine. Arm of 1600mm. Drilling capacity in steel: 60mm. Drilling capacity in foundry: 80mm. Boring capacity in steel: 100mm. Boring capacity in foundry: 120mm. Thread capacity in steel: 50mm. Thread capacity in foundry: 70mm. Spindle diameter: 90mm. Travel: 350mm. Taper morse 5. 12 speeds. Motor power: 7,5hp.

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

Sorgo smokehouse One trolley Standard 1000x1000x2000 mm

Table length: 3000 mm Table width: 0 mm Longitudinal X: 10000 mm Cross Y: 2000 mm Vertical Z: 1500 mm Positions ATC: 60   CNC Brand: Siemens CNC Model: 840 D MAKE   Soraluce TYPE     FS 10000 YEAR    2003 SPECIFICATIONS X - Travel   10.000 mm Y - Travel     2.000 mm Z - Travel     1.500 mm Controll        SIEMENS 840D Table Length x Width    3000 mm Table load in kG      10000 Kg Spindle Taper    Bt 50 kW power on spindle   35 kW Spindle speeds / ranges    3000 Rpm ATC tool changer   60 Coolant true spindle / Bar   15 Bar Number off controlled axis     3 + 2 + 2 = 7 CNC Automatic milling head / Gr.Auto indexing DIMENSIONS Length    16.000 mm Width  &n ...

Code: 0578 Brand: SORMEC 2000 - ITALY Model: 10000 - Norme CE Automatic cold press for panels, polyurethane foam, industrial shed doors, perimeter walls, foamed panels, insulation panels, laminates and various - CE standard Technical data: Working dimensions mm 10000 x 1500 Workpiece passage mm 2000 Opening mm 1000 Height of roller table mm 500 Motorised roller conveyor for workpiece feed with possibility of forward/backward movement N° 18 pistons diameter mm 70 N° 2 hydraulic power unit Pistons opening/closing choiceor Pressing timer Safety protection nets Power Kw 10,3 Compressed air 7 bar Overall dimensions: mm 10500 x 2300 x 3300 h Weight kg 19000

Sorvall Discovery 90 Centrifuge Digital temperature setting: 0 to 40°C Speed 90,000 rpm without rotor

Texture application machine SORBINI T20-3 STP Сharacteristic Length, mm - 6300 Width, mm - 2500 Working width, mm - 1200 Height, mm - 1700 Number of nodes, pcs - 3 Number of shafts, pcs - 6 Total power of engines, kW - 13,50

CNC Universal Bed Type Milling Machine Condition very good –11000 operating hours only Inspect under power IS POSSIBLLE Manufacturer Soraluce Model TA-A 25 Year 2018 Control Heidenhain TNC 640 Table size 2700 x 1000 mm Table load max. 6700 kg T-Slots 6 x 22 H12 Reference slot 1 x 22 H8 Distance between T-Slots 140 mm Travels Longitudinal travel X 2500 mm Vertical travel Z 1250 mm Cross travel Y 1200 mm Through the two horizontal positions forward of the automatically swiveling milling head the vertical machining can be extended by 500 mm (up to 1750 mm). Feed thrust X/Y/Z 10000 N Rapids X/Y/Z 25000 mm/min. Average Acceleration 2 m/s2 Automatic indexing milling head Number of swivelling positions 0.001° x 0.001° Positions in ...

Soriano brand crusher mill with blades, cutting chamber: 495x340 mm, motor: 7.5 Kw (10 hp). Step rotor, magnet in hopper. No electrical panel.

- Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1.300 mm - Working height 870 + - 20 mm - Max. part height ~ 70 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor 1 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 95 mm - Feed speed adjustable 5 - 25 m/min - Length 1.500 mm + 500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 12,56 kW - Voltage fluctuation max. +/- 5 %

- Producer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of construction 2007 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Max. part height 70 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp max. 120 W/cm - Electic capacity lamp infinitely variable - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 86 A / 36,4 kW - Voltage fluctuation max. +/- 5 %

- Producer Sorbini - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height ~ 880 - 920 mm - Part height ~ 5 - 80 mm - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive - Double diaphragm pump 1 Stk. - Length 950 mm - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 %

Grinder mill with blades Brand: Soriano, cutting chamber: 750x650 mm, motor: 40 hp. Triple rotor in ladder with 9 mobile blades and 6 fixed. With electrical panel. Flywheel.

- Producer Cefla/Sorbini - Type Ecolight - Year of construction 2000 - Working width 1.300 mm (1.445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Width 2.300 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 38 kW - Voltage fluctuation max. +/- 5 %

proximity switch -Manufacturer: di-soric -Product type: DCC 3.0V1.0 PSK-K-TSL -Number: 5x switches available -Price: per piece -Weight: 0.01 kg/piece

Table length: 2860 mm Table width: 1200 mm Longitudinal X: 2500 mm Cross Y: 1300 mm Vertical Z: 1400 mm Positions ATC: 1   CNC Brand: Heidenhain Bed type milling machine SORALUCE TR 25 X-2500mm High dynamics with Feed 35M/Min and 16000 N on All axes Longitudinal axis double servomotor, gearboxes and rack and pinionfor optimum interpolation independently and dynamics for workload on the table ORTHOGONAL Head indexing 1 x 1 Gr with Simultenous positioning of both head directions at 37 kW and 4000 Rpm Full enclosure with 2 BIG doors in front X-Axis: 2500mm Y-Axis: 1300mm Z-Axis: 1400mm Table Length: 2860mm Table Width: 1200mm Table load: 7500 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 0 - 35000mm/min. Feed rate Y-Axis: 0 - 35000mm/min. Feed rate Z-Axis: 0 - 35000mm/min. Millinghead auto-index:Orthogonal 1 Gr° Working ho ...

SORMA GNA AV550 vegetable flowpack machine for sale. Perfect condition, fully functional, I can send videos of the device in operation.

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

Ref. -No.: 10373 Manufacturer: SORALUCE Year of construction: 2017 Type of control: CNC Control: Heidenhain 530i Storage location: Halberstadt Country of origin: Spanien X-Travel: 6500 mm Y-Travel: 1600 mm Z-Travel: 900 mm Table-Size (Lxw): 8000 x 900 mm Drive power spindle: 28 kW Swivel range milling head: 2,5 ° Tool Taper: SK 50 Feed rate: 15000 mm / min Further information: - Number of axes = 3 + 2 - incl. Swivel head

Sorbini: yes, Rubber coating length cm: 1310,

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Program: yes, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-120, Durchlassbreite min-max mm: 1350, Working height: links, Lackauftragseinheiten: 980, Vorschub Transport m/min min - max: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Auftragseinheit 1 shore härte: yes, Gummierung mm: 5-15, Dosierwalze 2: 1400, Auftragseinheit gelasert: 5-25, Shore: möglich, Stärke Gummierung mm: 120, Dosierwalze verchromt: 150, Dosierwalzen Gleich und : 5-25, Reverse und Gegenlauf: yes, Type of transportation: 2,5, Working hight approx mm: 1520, Year :1999

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Program: yes, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 8-120, Durchlassbreite min-max mm: 1350, Working height: links, Lackauftragseinheiten: 980, Vorschub Transport m/min min - max: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Gummierte Auftragswalze(n): 15, Dosierwalzenschwindigkeit m/min min-max: EPDM, Auftragseinheit 1 shore härte: yes, Auftragseinheit 1 : yes, Gummierung mm: 5-12, Shore härten möglich: yes, Shore: möglich, Durchmesser Auftragswalze mm: yes, Type of transportation: 2,5, Working hight approx mm: 1520, Year :1999

Manufacturer: Sorbini / Tagliabue, Type: Walzstrasse, Year: 1998, Work piece width min-max mm: 1.300, Min.-max. workpiece height in mm: 3 - 80 , Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 6 - 24, Inlet conveyor: yes, Lackwalze 1: T/20-MF, UV Trockner 1: 1 Lampe, Lackwalze 2: T-20-MF, UV TRockner2: 3 Lampen, Lackwalze 3: T-20MF, UV Trockner 3: 3 Lampen, Paint sander: TAG 13KS DPSTRA, Paint rollers: 3, Year :1998

Manufacturer: Sorbini, Type: VA/32-AT, Year: 1999, Number of units: 1, kW Leistung Motoren: 1,2, Working width mm: 1350, Operating side: links, Wight approx. kg: 1260, Year :1999