soli used for sale

Description Automatic Coiler Twin coiler Max. external diameter of coil is 800 Twin binder Pipe cutter

Tires, solid rubber tires, forklift tires, complete wheels -Handover: in its current condition as inspected -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic, 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Sale: complete -Dimensions each: Ø 570 x 160 mm -Weight: 96 kg

For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...

tires, solid rubber tires, forklift tires -Manufacturer: Solideal, solid rubber tires 2 pieces -Tire size: 23x9-10 RIM 6.50F-10 -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 465 x 200 mm/piece -Weight: 40 kg/piece

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Solideal, solid rubber tires Magnum with rim -Tire size: 18x7-8 -Bolt circle: Ø 140 x 18 mm -Recess: Ø 100 mm -Number: 2x tires available -Shipping/Price: complete -Dimensions: Ø 380 x 160 mm -Weight: 23 kg/pcs

Solar Gas turbine Taurus 65 SOLONOX The turbine and gear box is from 2022 and it only has 2000 running hours. The package is from year 2011. The condition is excellent and is ready to start working, in addition it included Solonox mode and fire extinction module. All the maintenance has been done by Turbomach official service. The equipment is already dismounted on our warehouse and ready to be load. It is available all the systems except the exhaust system that is optional. It is possible to have a visit and a inspection of the turbine. Also is available a boroscope of the turbine. YOM:2022 Power: 6300kWe Fuel: Natural Gas Working Hours: 2300 h Voltage: 6300V

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

Pressure: 13 bar Motor: 4 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,39 m³/min Measurement (WxHxD): 1240 x 950 x 650 Weight: 246 kg Compressed air connection: 1/2

Pressure: 7,5 bar Motor: 18,5 kW Free air delivery: 3 m³/min Measurement (WxHxD): 1250 x 1335 x 850 Weight: 400 kg Compressed air connection: 1

Used Used Packer Monoblock Buhmann Pac Solutions: Year: 2016 Condition: Good Used Packer Monoblock Buhmann Pac Solutions: Carton Former Buhmann Pac Solutions Model: C300 Year: 2016 Speed: 30 carton/minute Closure type: hot melt glue Brand and model: Nordson Problue 4 Case Packer and Carton Closer Buhmann Pac Solutions Model: modello PF800 Number of heads for packaging: 4 1 head for the closure Operation: automatic Closure above and to the side Safety protections Code: JM 105 More details: https://bottlingscout.com

Sollas S60 wrapper for cardboard packaging The plant was built in 2007 by Sollas Deutschland GmbH & Co KG. Since then it has been used for packing cartons. It has a product retraction function, so that folding boxes can also be welded with feet. ” Aggregate: wrapper s60 60 pcs. /min. Film rollers: Max. Outer diameter 400 mm Max. Roll width 435 mm Min. Internal diameter 70 mm Max. Internal diameter 83 mm Min. Cutting length 50 mm Max. Cutting length 750 mm Dimensions of the packaged goods: Length: 40 mm/300 mm Width: 20 mm/200 mm Height: 16 mm 96 mm According to the information provided by the manufacturer, the machine is designed for the following packaging materials: - Coated paper - PP - PE The machine is designed for the complete or partial packaging of products. Unpackaged food is not compatible.

SALES PROPOSAL GAS TURBINE PACKAGE – SOLAR TAURUS 70 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: Solar Model: Taurus 70 – 10302S CS/MD Stand Core Turbine Year: 2019 Package Year: 1997 Condition: Used – Good Operating Condition 2. Technical Specifications • Output: 8,500 kVA • Frequency: 50 Hz • Voltage: 11,000 V • Alternator: LS – 6,300 V • Fuel Type: Natural Gas 3. Operating Data • Total Package Hours: 14,517 hours • Number of Starts: 127 • Next Planned Major Overhaul: 30,000 running hours • Borescope Inspection: Completed in 2024 (report available upon request) 4. Key Advantages ✔ 2019 Core Turbine (recent upgrade) ✔ Low number of starts ✔ Recent borescope inspection ✔ Suitable for 50 Hz industrial power generation ✔ Natural gas operation 5. Commercial Terms • Availability: To be con ...

For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...

2015 Manufacture Date 0 hours since manufacture Stored continuously been stored indoors a temperature-controlled building since delivery (still crated) 7901S Taurus 60 (SoLoNOx) 5670/kWe Generator 13800 Volt 60 HZ (1800 RPM) 3 Phase No enclosure, open skid TURBOTRONICS PLC 4 with TT4000 Display FAT tested by Solar Turbines VFD start system Complete Air inlet filtration system Complete site (equipment) inspection performed by Solar 2019

General SKU062B447 LocationBarneveld MakeTechno-G Solids Zutphen Year of construction1998 Pressure Working pressure10 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1500 Ltr. Pressure10 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4301 (304) Capacity1500 Ltr Vessel sizesdia. 1200x1000mm Dished topConical bottom Outletdia. 200mm Information Mounted on legscheck Floorspace1,2x1,2 M Total height3,3 M Weight850 KG Extra Specifications- With candle filter make Pall, type Filtroplast 70/50 Pressure vesselsTechno-g SolidsTanks > Pressure vesselsBrand > Techno-g Solids What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Ba ...

General SKU204U051 LocationBarneveld MakeSollich TypeKK 420 Spezial No.0628 Year of construction09/1998 Main Features MaterialStainless steel Length6000 mm Width600 mm Specified Features - Belt cooler Cooling beltcheck Belt can be cooledcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck Total height1.14 m Weight2000 kg CEcheck Floorspace5,32x0,99 m Extra SpecificationsWithout belt, without control, incomplete this beltcooler was part of a SKU 204U1442 ( sollich FKW-s 15 chiller) Belt coolersSollichBelt coolers > Belt coolersBrand > Sollich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5-axis DN SOLUTIONS DVF 6500 was manufactured in 2022. It features a 650 x 600mm table, capable of handling a maximum weight of 600kg. Equipped with a high-speed spindle up to 18,000 rpm and a 40 tool magazine, it ensures efficient machining. The FANUC control unit and high-pressure 20 bar cooling through the spindle enhance precision and productivity. Consider the opportunity to buy this DN SOLUTIONS DVF 6500 vertical machining centre. Contact us for more information.

This 3-axis DN SOLUTIONS PUMA GT2100M was manufactured in 2022. It features a maximum spindle speed of 4,500 RPM and a robust turret with 12 stations. The machine is designed for high-precision turning and milling, with an X travel of 230 mm and Z travel of 580 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA GT2100M turn-mill centre we have for sale. Contact us for further details.

This 3-axis DN SOLUTIONS PUMA 700LM was manufactured in 2023. It features a maximum turning length of 3,200 mm and a swing over bed of 900 mm, making it suitable for heavy-duty operations. The machine is equipped with a robust 24 chuck and a powerful spindle motor with a maximum torque of 8,076 Nm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 700LM turn-mill centre we have for sale. Contact us for further details.

This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. It features a maximum spindle speed of 4,500 RPM and a chuck size of 8 (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details.

This 8-axis DN SOLUTIONS PUMA TT1300SYYB turn-mill centre was manufactured in 2019. It features a twin-spindle and twin-turret configuration, allowing for independent operation. With a maximum spindle speed of 6,000 RPM and integrated high-speed C-axis and Y-axis, it offers advanced capabilities for complex machining. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT1300SYYB machine we have for sale. Contact us for further details.

This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details.

This 7-axis DN SOLUTIONS PUMA MX2600ST was manufactured in 2023. It features a maximum spindle speed of 4,000 RPM and a bar capacity of 76 mm. The machine is equipped with a multi-tasking configuration, including 3 spindles and a lower turret with 12 stations. If you are looking to get high-quality milling and turning capabilities, consider the DN SOLUTIONS PUMA MX2600ST mill-turn centre we have for sale. Contact us for further details.

This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details.

This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022. It features a table size of 1,400 x 670 mm, with an impressive X-axis travel of 1,270 mm and a Z-axis travel of 625 mm. The machine is equipped with a maximum spindle speed of 12,000 RPM and a tool magazine capacity of 40 stations. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details.

This 4-axis DN SOLUTIONS LYNX 2100GA was manufactured in 2021. As new, showroom model. It features a maximum spindle speed of 6,000 RPM and a bar capacity of 45 mm. The machine is designed for high-performance compact turning, optimized for small precision parts. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100GA horizontal turning machine we have for sale. Contact us for further details.

General SKU068Z267 MakeWila Maschinenbau Sollstedt TypeHOGD-M-750 LTR No.0654 Year of construction1995 Mounted on legscheck Main Features MaterialStainless steel Volume750 Ltr. Motor15 KW Specified Features - Pre-mixer MaterialStainless steel 1.4301 (304) Pre-mixer(1x) Fountain mixercheck Capacity750 Ltr Vessel diameter1400mm Cylindrical height600mm Conical height800mm Inletdia. 300mm With inspection valve480x560mm Outletdia. 150mm Motor15,0 KW + 4,0 KW (Mischwelle/Mischzylinder) Information LocationBarneveld With switchcheck Floorspace1,9x1,6 M Total height3,4 M Weight1800 KGPre-mixersDiscountWila SollstedtMixers > Pre-mixersDiscountBrand > Wila Sollstedt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

Enclosure transfer element photovoltaic system GAK transfer element RJ45 for I ´ checker connection Manufacturer Wieland GET solar new, fully assembled Price per piece 400,00 6 STK. in stock

Fully automatic conveyor belt made of stainless steel including water supply and height adjustment function Manufacturer: Solia Material: 1.4301 (V2A) Dimensions: Length: 3.80 m Width: 1.20 m Frame height: 80 cm Height with funnel: 1.20 m The conveyor belt was originally mounted on a potato peeling machine. It has several tracks to sort the potatoes. However, it is suitable for almost all types of bulk materials. Furthermore it has a funnel through which enters the bulk material on the band. However you can easily disassemble the frame where the funnel and the tracks are welded on.You can easily loose the frame with the help of the star head screw. The conveyor belt was hardly used and is very high quality! Therefore in a very good condition!

Sollas SB250 stretchbander for cartons with 1000mm x 150mm (L x W) exit conveyor, output up to 25 packs per minute. Carton size range min. 60 x 35 x 10 mm (LxWxH), max. 400 x 450 x 200 mm Foil width 100 to 250mm Foil roll diameter max. 280mm Compressed air 4-6 bar

SOLD MARINE GEARBOX WITH PTO GUASCOR R360 4,4:1 SERIAL NUMBER 113058 MANUFACTURING DATE 13-11-2009

51 MW - CCGT comprising 3 x 12 MW Solar Gas Turbine generator and 1 x 15 MW steam turbine generator Model : TITAN 130 Capacity : 12 MW Voltage ; 11 KV / 50 Hz Qty : 3 sets Titan 130 + 1 set STG Year : 2012 Running hr : 6000 hrs since new

Sollich enrober EM 820 N

Two (2) Overhauled Solar Mars 100 Version 15000SAN – 10 Mw, 13,800v. 60 Hz (each) ISO - Natural Gas Turbine Generator. DOM – 2011 – warranty expired – sold as is – where is - These two units have been dismantled. SCOPE of SUPPLY: Complete Gas Turbines including: Gas turbine (axial compressor, combustion chamber, and power turbine), Intake volute, inlet silencers, Exhaust volute, exhaust silencers, Lubricating oil system, oil tank, heater, main and auxiliary oil pumps (main mechanical, AC electric pre/post, DC electric backup), filter, 120V DC starter, pressure and temperature regulator, oil mist separator, ventilation flame arrester, Starter motor, Oil pressure regulation system, Thermostat valve, Duplex filter holder with its 6-way valve, CO2 piping system, fire detection, and fire extinguishing system CO2, Instrumentation associated with the turbine (pressure transmitters, ...

Shredder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 700x530 mm, motor: 30 Kw (40 hp), year: 1998. Step rotor, vacuum cleaner: 1.5 Kw (2 hp) and silo: 2,000 L. With electrical panel.

Sollas Bandum 25, untested, as spare part donor

Sollas SB 380 stretchbanding machine, pack size min. 50 x 15 x 20 mm (LxWxH), max. 210 x 250 x 150 mm (LxWxH), capacity up to 30 single or bundle packs per minute.

Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers

Sollas AB 25/50 banding machine for cartons and similar with infeed stacking/collation unit (cartons are collated on their narrow side), size range min. 29 x 50 x 5 mm (LxWxH), max. 330 x 330 x 160 mm (LxWxH), foil width 25/50 mm, suitable for PP, PE, etc., capacity up to18 strokes per minute, machine floor space approx. 3400 x 1600 mm (LxW), machine height approx. 1500 mm

OVERWRAPPING MACHINE SOLLAS 19 Mobile automatic overwrapping machine, designed for precise single wrapping of folding cartons in the cosmetics sector. SIEMENS, Simatic S7-300 PLC. With linear infeed conveyor, 2 format sets and spare parts. Built in 2004. PRODUCTION - Machine speed: 50 cycles per minute max. (depending on setup, product, feed system, film type) Processable materials: PP, PE, and coated paper Package dimensions - Width (W): min. 40 mm; max. 200 mm - Length (L): min. 45 mm; max. 300 mm - Height (H): min. 16 mm; max. 140 mm Film roll dimensions - Outer diameter: 320 mm - Maximum roll width: min. 50 mm; max. 425 mm - Inner diameter: 45-80 mm - Film cut length: min. 110 mm; max. 590 mm SIZE - Dimensions: 3700 x 1800 x 2000 mm (ca) - Weight: 1200 kg (ca) ENERGY CONSUMPTION - Power supply: 230/400V - 3 phases + neutral 50/60Hz - Con ...

Grinder mill with blades. Brand: Mateu I Solé, model: B-25, cutting chamber: 680x380 mm, motor: 15 Kw (20 hp). Stepped rotor with water cooling. No electrical panel.

Paint dosing system from Fluid Solution incl. software

Brand: Mateu I Solé, model: B-10, cutting chamber: 450x280 mm, stepped rotor, motor: 7.5 KW (10 hp). With electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Brand: Direct Colour Solutions Model: DJ 1800S Printer, 6" IR2 INK Year of production: 2020 Equipment: Stock Base Dongle, ADA Module 1800S IR2 LCF, EZCyl, 1800S, IR2 Ink, 1800 Vac Table Kit, 13", 220V

Thank you for your interest in our used machines, which we are able to offer you as follows: Manufacturer: Sollich Model: 100F Chocolate Tempering Machine "Mini Temper" Year of construction: 1992 Masch. Nr.: 2241 Capacity: up to 80 kg/h Miscellaneous: good condition Chiller New in 2023 With the 100 F, you can keep 25 kg of couverture at a constant temperature and process it ideally pre-crystallized for several hours, or produce up to 80 kg of pre-crystallized couverture per hour. We offer this machine for sale "as is". from Hess warehouse. Lichtenau, unpackaged

Key data: 30 mm

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Grinder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 710x520 mm, motor: 30 KW (40 HP). Stepped rotor, flywheel, Without vacuum cleaner. With electrical panel.

weight max.: 3 t clamping width: 3000 mm total power requirement: kW weight of the machine ca.: 0,110 t dimensions of the machine ca.: 3x0,3x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: SOLO Model: Profitherm 300 Year of Manufacture: 2019 Type of Machine: Condition: Used Specification: 5 main stations: Furnace; salt bath; wash machine; salt recuperator; manipulator Water supply 900 l/h; 15 Celsius-25 Celsius; 5 bar; min bar 3,5 bar Gas connection panel: N2/C3H8/Air/CH3OH/NH3 Electrical connections: 3400 AC; 50 Hz; 221 kw; 3L+PE (3L: 3X 295mm2 ; PE: 1x95mm2) Control voltage: 24 VDC (230VAC) Electrical connections total: 270 kw Air supply: 7Bar Piloting system: Siemens It is capable of loading and treating 11 charges in one day. Find more here - / Contact us at -

Key Details: • Turbine: Solar Centaur 40 (Dual Fuel: Natural Gas & Diesel) • Power Rating: 3.5 MW • Total Running Hours: 40,000 since the last overhaul • Alternator: Hyundai, Air-Cooled, 3,500 kW, 50 Hz, 3,300V • Heat Recovery Boiler: Nebraska, 22-ton capacity • Gas Compressor & Control Panel included Spare parts available. Find more here - / Contact us at -