soft drink used for sale

screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 18,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4260 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD 0: 20mm (s) Ampullen/h 0: mm 0: mm total power requirement: 22 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 4260 x 1660 x 1590 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two-coordinate measuring instruments ZKM Applications: External measurements - Internal measurements - Bore distance measurements with double image eyepiece Shape tests with reable inserts Angle measurements with angle measurement slot and optical rotary table (2") Male thread measurements Equipment: Spitzenbock - Angle measuring device to the tip trestle (5") - adjustable V-bearing opt.-mechanical probe (measuring lever attachment) - adjustable plant table - incident light illumination Projection device - Rotary table with partial circle Increased optical touch accuracy through the use of inteference lines ZKM 01-150 Measuring range x - 150 mm Measuring range y - 100 mm Scale value 0.1 mm ZKM 01-250 Measuring range x - 250 mm Measuring range y - 100 mm Scale value 0.1 mm possible versions:  ...

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 800 x 700 x 1200mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm grinding wheel diameter: 350 mm grinding wheel width: 50 mm bore: 127 mm : MK 4/5 work piece spindle speed: 50-500, stufenlos 1/min workpiece spindle - bore: 35 mm grinding head swivelling: 360 ° grinding spindle head - swivable: 12 + - ° grinding spindle speed: U/min : bis 0,05 mm/Ø : bis 0,05 mm/Ø : ±11 ° longitudinal feed of the table: 340 mm table speeds: 0-5 m/min : kg cross travel: mm : kg : mm grinding depth: mm : mm tailstock quill taper MT: 3 MK quill travel: 20 mm centre distance: 340 mm : M 48x3 total power requirement: 4,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,02 x 1,2 x 1,45 m overhauled with Tschudin geometrical protocoll. Internal grinding device is not in the offer included. Extra costs 5.000 Euro. Die Werkzeugmaschine entspricht zum derzeitigen Zeitp ...

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

Westphal Mechanics C7x Commutator Slot Center Machine No. M64127 Year of construction: 09/2019 The commutator slot center has four processing steps. In the steps, the following components are approached: Contact slot saw Insulating groove saw Deburrs Brush The Stäubli TS 80 Robotor with SP1 control has two grippers that transmit the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More information via this link. Further technical data will follow shortly. The roller straightening unit is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves,  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mm grinding length: 1500 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Steuerung FANUC 18i Maschine wird vor Auslieferung teilrevidiert nach Kellenberger Messprotokoll. -automatische B-Achse mit Hirth Verzahnung -Schleifscheibe rechts 500x80x203,2mm -Werkstückspindelstock in verstärkter Ausführung -Pneumatische Entlastung für den Werkstückspindelstock -H-Reitstock (heavy - verstärkte Ausführung) -Hydraulischer Pinolenrückzug für den Reitstock -Reitstock mit Mikroverstellung für Zylindrizitätskorrektur -Abrichtgerät am Untertisch montiert -Aktive Marposs L ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

DYNAJET 500th HELI with approx. 800 operating hours, price 38.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mini ...

: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DYNAJET 500th HELI with approx. 1,450 operating hours, price 33.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

grinding diameter: 300 mm grinding length: 620 mm centre height: 150 mm honing diameter: mm stroke: mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m machine overhauled according Tschudin protocoll -Checkomatic DRO with max. 5-axis x und z swivel angle DRO upper table are included swivel angle DRO Workhead or Whellhead upon request -new electrical cabinet -new AC motor for the workhead Internal grinding device upon request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...

x-travel: 164 mm y-travel: 210 mm z-travel: 70 mm Control: CNC 6000 turning speeds: 40000 U/min tool adaptor: HSK E 25 tool change unit: 7-fach total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,3x1,0x1,9 m HSC Milling Machine Portal stand construction for milling and engraving High-frequency spindle HFS 301 40,000 min-1, 3000 watts, HSK 25 E recording Tool length scan Laser sensor system for measuring the workpiece length and workpiece diameter NC controlled part head CNTK 200 center height: 200 mm Clamping device of a groove table Clamping device for clamping round components Coolant circulation system Collet holder Alpha CAM software (AC Mill 2D) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 bar control: Beckhoff turning speeds: 1435 U/min engine output: 5,5 kW rivet time adjustable: 2-3,5 sec compressed air: 6 bar total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 10x4x6 m Ingredients: 16x punch riveting tools 16x rivet feed units 6x Beckhoff control 3x HMI Mobile Panel 3x HMI panels 6x hydraulic units Material: Semi-tubular rivet made of stainless steel - flat head, different lengths Connection of 2 layers of aluminum (0.8 mm), no pre-drilling necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

KAWASAKI YF03N ULTRA HIGH SPEED DELTA ROBOT The Y Series robots are parallel type pick & place robots and offer quality and reliability. Brand Kawasaki Type YF03N Year of construction 2010 Serial number YF0030012 Electrical connection 400 V Total dimensions L 2400 mm Total dimensions W 2350 mm Overall dimensions H 2750 mm Description of the Kawasaki YF03N robot Type Parallel Kinematics Degree of freedom (axes) 4 Maximum payload (kg) 3 Positioning repeatability (mm) 1 ± 0.1 Range of motion (mm) ø1,300 × H500 Weight (kg) 145 Angle repeatability (°) ± 0.1 Cycle time (payload) 2 0.27s (1 kg) 0.45s (3 kg) Other: 400 volts; camera; Software; instructions; components; Iron frame, with control cabinet; 2x connection cable 5-pin; Control panel E40E-A003

turning diameter: 520 mm turning length: 1625 mm control: FAGOR 800 TG greates pass round over bed: 530 mm swing diameter over slide rest: 475 mm centre height: 260 mm bed width: 350 mm main spindle bore: 68 mm turning speeds: 1500 U/min rapid traverse: 5 m/min Drive: 10 kW total power requirement: kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,8x1,4x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The surface inspection system is used for 100% control of films. It detects, classifies and logs optical errors with an uplight illumination (top plus bottom). - Modular architecture - Optimal lighting technology - Process synchronization - Real-time error analysis - Automatic error marking / label control - Different error views Circumference: - 2 inspection stations Each 2 x High Speed 80 MHz CCD line scan camera with 4096 pixels (18,000 scans/sec.) Lens adapter, lens, mounting kit and workstation software - Lighting 2 x high-clocked illumination fluorescence with cylindrical lens 2500 mm - Inspection frame - FSP 600 Server

: Bj. 1996 pulling capacity: 100 kn stroke length max.: 2500 mm speed: 1-22 m/min return speed: 2-27 m/min Control: SPS S5-115 U Cast aluminum bars were cleared mechanically on this production line machined (drilling / milling) and separated into individual parts This also includes: -1 broaching machine (HOFFMANN, horizontal) so far for steel processing (Shift rods) - Horizontal broaching machine from Hoffmann - Machine type: RAW 630 x 2500 x100 - year of construction 1984 - Control S5 Siemens - 4 clearing points with 3 partial positions each - 1 x reloading for rear side processing - Loading and unloading: - 3x bunkers for raw parts - 3 x feed belts - Loading and unloading handling with 4 x loading and 4 x unloading grippers - 1 x turning device - 3 x material buffers for finished parts - year of construction 1995 - Siemens S7 control The data for this ad was created with ModulMWS - t ...

table diameter: 200 mm table load: 85 kg table height: 125 mm Control: CNC 220 total power requirement: kW weight of the machine ca.: 85 kg dimensions of the machine ca.: 1,0x0,8x0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6,0 m3/min rated current: 9 A total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m swarf cleaner The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...

x-travel: 800 mm y-travel: 500 mm z-travel: 600 mm control: FANUC 15 M turning speeds: 6000 U/min 0: 7,5/5,5 kW rapid traverse: 24 m/min total power requirement: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,5x3,0x2,8 m double table: tool probe: swarf conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 200 mm grinding depth: 250 mm swing diameter: 330 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: SPS SIEMENS SIMATIC HMI TOUCH Operating hours: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Grinding wheel: Diameter: 300 mm Width: 30 mm Bore: 127 mm Workpiece weight on centres max.: 20 kg Grinding wheel speeds: number (steps): 3 up to: 2450 rpm Hydraulic cross travel: 170 mm Angular displacement: 30 ° Work piece spindle head: speeds: stepless from: 60 rpm up to: 1200 rpm Spindle hole: 20 mm Spindle taper:: 4 MT Taper in tailstock:: 2 MT Spindle stroke: 20 mm Spindle diameter: 32 mm Table angular displacement: 30 ° Feeds: Z axis (longitudinal travel): 100 - 3500 mm/min X axis (transversal): 0.01-9 mm/min External Grinding wheel motor: 4.5 HP External Grinding wheel motor: 3 kW Internal Grinding wheel motor: 1.1 kW Machine´s weight about: 1600 kg Overal ...

workpiece diameter: 125 mm module: 4 Control: SIEMENS 840 C x-axis: 105 mm y-axis: 40 mm z-axis: 500 mm total power requirement: 47 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,6x2,1x3,1 m with measuring and palletizing system from Hörzer & Fehrenbach for gearwheels (bore receiver) Workpiece diameter: 17-39.5 mm Component height: approx. 6-15 mm Oblique as well as straight toothed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: SPS SIEMENS SIMATIC HMI TOUCH Technical data Centre height: 100 mm Distance between centres: 400 mm Max. Longitudinal travel: 400 mm Grinding wheel: Diameter: 350 mm Width: 50 mm Bore grinding wheel width: 50 mm Table load max.: 20 kg Workpiece weight on centres max.: 20 kg Grinding wheel speeds: Peripheral speed: 30 m/s Angular displacement: 15 / 30 ° Work piece spindle head: speeds: stepless from: 30 rpm up to: 1200 rpm rotatable: 90 ° Spindle taper:: 4 MT Table angular displacement: 30 ° X axis (transversal): 0.01-9 mm/min Table speed: stepless from: 100 mm/min up to: 3500 mm/min Voltage 50 Hz 3x: 380 Volt Internal Grinding wheel motor: 1.1 kW Total power required: 10 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1600 mm Width: 1400 mm Height: 160 ...

Heraeus Vötsch Temperature Test Chamber Here we offer a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Basic unit type VT 7021 Operator terminal color touch panel Microprocessor monitoring and control MINCON/32 independent adjustable temperature limiter tmin / tmax adjustable software temperature selector limiter min./max. serial interface RS 232 Schuko socket potential-free contact for test material shutdown Refrigeration unit air-cooled 1 door lockable, one-hand operation Calibration of 2 temperature values Mobile version 1 bushing, NW 80 mm, right Test room volume 210 liters Temperature range -70°C to +180°C Temperature deviation over time ± 0.2 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Temperature change rate heating 2.5 K/min Temperature change rate cooling 2.5 K/min heat compensation 800W  ...

description: Used Glideliner for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx.6 used glideliners; from 15.000 bottles/h up to 45.000 bottles/h, available immediately Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! ...

description: Various second hand full-crate-Inspections (Krones / KHS/ Gebo) for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 5 used full crate inspectors (predominantly Krones,KHS, and Gebo). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also  ...

description: Various second hand tray- and carton conveyors Krones/KHS/Gebo for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 140m used Tray-and carton conveyors (predominantly Krones,KHS, and Gebo, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger pr ...

description: Second hand crate-turning-stations for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 21 diverse used crate-turning-stations. When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our ...

The YC2500HR Large Format Printer was manufactured by the Chinese company Linyi Win-Win Machinery Co., Ltd. in 2019. The digital printer provides the highest print quality thanks to the LED UV curing system and eight 6th generation Ricoh print heads with CMYK + 2x WHITE + 2x VARNISH configuration. The machine allows you to print at a speed of 30 m2 / hour on items such as: ceramics, PVC plates, corrugated cardboard or plastic. The maximum width of printing on an object is 2500 mm. The plotter is equipped with RIP ONYX Software, Panasonic servo motor and TAIWAN HIWIN linear motor. Technical data of the YC2500HR large format printer - type of carrier: PVC, metal plates, glass, wooden boards, acrylic, ceramics, wallpaper, corrugated cardboard, plastic - RIP software: ONYX Software - print heads: 6th generation Ricoh - number of print heads: 8 - configuration of heads: CMYK + 2x WH ...

x-travel: 280 mm y-travel: 460 mm table-size: 280x610 mm table movement: 280x460 mm spindle turning speed range: 40-2500 U/min spindle diameter: mm grinding range: 5,0-125 mm grinding depth: 0,4-5 mm stroke length max.: 92 mm total power requirement: kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1,5x2,8 m Single Column Jig Grinder, conventional, DRO, accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Printshop Package from one place in poland: 1. 8 up Violet CTP Heidelberg Prosetter 102 - Type 2170 - ID No. 05805023 - date of production: March 2004 - efficiency: 12 plates in B1 format/h (2400 dpi) - in the beginning of 2017 new laser mirror set - current counter below (from CTP User Interface) 2. Developer Glunz & Jensen Raptor PRO 85P - model MP 85 - date of production: April 2005 - the set consists of cooler E04535 - new pre-heating rubber and silicone rollers in July 2017 - up-to-date exchange of spare parts (gears, roll mounting) 3. Stacker for AGFA boards - Type ST 125SX - May - 05/2012 4. Additional second CTP imagesetter to be sold for parts - Heidelberg Prosetter 102, D-69115 - Type 2170 - ID No. 05805023 - date of production: August 2005 - the imagesetter does not include: engines, sliders and laser mirror set (head) 5. The set consist ...

x-axis: 210 mm y-axis: 300 mm voltage: 230 V current: 16 A weight: 260 kg dimensions of the machine ca.: 1,75x1,0x0,9 m 3-axis laser system 2 VitroScan 3D scanning systems LCS-line projector 1200 ANS Iallows for the production of three-dimensional face scans (3D portraits of people) and other 3D glass objects, as well as the internal engraving of photographs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 200 mm min. workpiece diameter: 30 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, -  ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.