soft drink used for sale

roll diameter: 550 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

THE CLASSIC DOUGHNUT FRYER Consistently high quality doughnuts due to soft turning device frying platform for 36 pieces; productivity per hour: 360 pcs.; manual lifting device; manual turn; temperature controller with temperature indication; dimensions: 1010x1120x820 mm; power: approx. 6.8 kW

ID TR235 Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of sell ...

Press force max.:: 3000 kN heating plates:: 600 x 630 mm electrically heated:: °C heating power:: kW piston stroke:: 420 mm no. of stages:: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity in X (usefull): 5.250 mm Capacity in Y (usefull): 1.350 mm Capacity in Z : 100 mm Routers: 1 Main routing motor: 7,5 kW, spindle: HSK F63, C-axis Toolchanger with 12 places Vertical drills: 11 in X-direction, 11 in Y-direction Horizontal drills in X : 6 Horizontal drills in Y : 2 Machine table: 10 Supports with vacuum cups Software: Woodwop 4.0

In line 90? panel turning device (or transport crosswise without turning) Panels entering lengthwise, turning them to crosswise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machine Consisting of: -First roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW, additional roller coveyor aside in case of transport without turning -Adjustable fence -Clamping and turning device -Second roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feeds ...

roll diameter: 700 mm roll length: 2200 mm rolls drilled: Kernbohrung Nip adjustment: hyraulisch 0 total power requirement: 160 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 120 mm screw length:: 17D screw speedl:: 42 U/min drive power:: 138 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In line 90? panel turning device Panels entering crosswise, turning them to lengthwise Fence side at the left Panel sizes: -Width from 220 mm to 1000 mm -Length from 320 mm to 3200 mm The panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machine Consisting of: -First roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW -Clamping and turning device -Fixed fence -Second roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle w ...

machine measurements: 2.900 x 700 x 1.700 mm machine weight: 400 kg power capacity: 2,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

2 Thermal VLF Systems form one place: 1. CTP machine Lotem XL 60/80 Creo, YOC 2001 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness the smallest format is 45.7 x 38.1 The software is equipped as follows: 1 x Lotem XL 60/80 Brisque 4 Impose 1 x Solder 800V transformer 1 x Brisque Back & Front 1 x Lotem XL Singel cassette 1 x Brisque to Improof 1 x Brisque export PS b/w option 1 x EV 800 LVD w/ 8x36GB 1 x Solder XL Wide Conveyor 2. CTP machine Lotem XL 60/80 Creo, YOC 2000 similar to Creo Kodak Trendsetter VLF format 150cm x 200cm in production The imagesetter is equipped as follows: imagesetter, plate machine, plate stacker max.format 152.4 x 203.2, 0.3-0.4 thickness, the smallest format i ...

cutting diameter: 220 mm band length: 425 mm cutting lenght max.: 2500 mm total power requirement: 0,95 kW weight of the machine ca.: 219 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 680 mm sawblade length: 8550 mm Sawblade width max.: 1,3 mm Cutting height: mm Motor output: 20 kW Table dimensions: 600 x 620 mm Feed speed: m/min. Machine height: mm Weight: 10.000 kg Bandsaw horizontal, Precision-Saw for Silicon (Solar industry) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: SIEMENS 840 C total power requirement: 12 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 1150 working heigth: 200 mm length: 1000 mm width: 800 mm depth: 1400 mm Coil Weight per Base: 300 kg Base Diameter: mm Stack height: 0 mm No. – Furnace: 0 No. – Base: 0 No. – Cooling Hood: 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 250 mm roll length: 500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm roll length: 1100 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 85 t chamfer lenght: 2000 mm distance between columns: 1750 mm Control: TRUMPF Delem DA 65T total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m T R U M P F (Germany) CNC - Controlled Hydraulic Press Brake Model TRUMABEND V 85, year 1996 Serial No. 88 31 52 ______________________________________________________________________ ____________ Pressure, max. 85 to Working width, max. 2.050 mm Working width between columns 1,750 mm Side daylight of each column 410 mm Max. distance between upper and lower tool holder w/o tools 350 mm Adjustment of upper tool holder approx. 300 mm Table width approx 105 mm Height of Table from floor approx. 1.050 mm Max. stroke 215 mm  ...

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 660 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: M3-M16 Weight: 27 kg working range: 200-1900 mm turning speeds: 300 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...

turning diameter: 400 mm turning length: 915 mm control: NUM Type 1062 T total power requirement: 12,5 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2700 x 2300 x 1350mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3100 x 1350 x 1260mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 3 kW weight of the machine ca.: 1,28 t dimensions of the machine ca.: 2600 x 1350 x 1260 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 250 mm workpiece height: 485 mm Control: ELESTA CNC 314 total power requirement: 10 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 ____________________________________________________________ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/mi ...

table length: 1160 mm table width: 710 mm daylight: 650 mm Control: WENZEL ME 5007 total power requirement: kW weight of the machine ca.: 800 kg dimensions of the machine ca.: m 3-D-coordinate measuring machine with METROLOG II-Software The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 3 - 5 mm throat: 150 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Various Special purpose drilling machines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...

x-travel: 1000 mm y-travel: 1600 mm z-travel: 800 mm Control: WENZEL WPC 2040/FW31.351 total power requirement: kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of axles: 2 St. length: 7,7 m total wight: 20 t axis load in front: 10 t axis load in the back: 10 t width: 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

module: 12 diameter: 233 mm Bore diameter: 100 mm width: 274 mm number of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

module: 11 diameter: 315 mm Bore diameter: 60 mm width: 202 mm number of teeth: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 360 mm grinding length: 1600 mm centre height: 180 mm internal diameter: 0 mm grinding depth: 0 mm swing diameter: 0 mm total power requirement: 40 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m K A R S T E N S (Germany) Universal CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3  ...

Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.