133,253 used machines on RESALE, but how to find them? Machine Search
Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ
THERMO HAAKE Viscotester 550 Viscometer with PK 100 D Plate-Cone Measuring System Speed Range: 0.5 to 800 min-1 Uncertainty: ± 0.1% CD Mode: < 0.5% min-1 Torque Range (Ncm) up to 400 min-1: 0.01 to 3 Torque Range (Ncm) up to 800 min-1: 0.01 to 2 Uncertainty: ± 0.5% SDF Temperature range: 50 to +250 °C Power supply: 230/115 V (50/60 Hz) With measuring tank for coaxial cylindrical geometry With measuring unit PK 100D with multiple sensors The MV 3 st mobile is slightly damaged Viscotester 550: Typ002-7026 Haake PK 100 D: Typ002-2089
Scrubber BUCHI K-415 Acid Vapour Suction and Neutralization System BUCHI K415 Dimensions (L x W x H): 417 x 347 x 526 mm Weight: 12Kg Year of manufacture: 2012 In excellent condition
Manufacturer: Hanel Type: Lean-Lift Model: 1300-825 Year of Manufacture: 2007 Drive Power: 5.5 kW Operating Mode: 100% ED Voltage: 400V, 3-phase, 50Hz Current: 12.0 A Max Container Load: 250 kg Average Container Load: 33 containers front / 34 containers rear Front Load Capacity: 250 kg Rear Load Capacity: 250 kg Find more here - / Contact us at -
AGFA Avalon N4-30 (Screen PT-R 4600 S) year 2016 32 diodes 21 plates/h exposure time 23,920 h Running time 35,300 h plate loader without RIP plate processor Glunz&Jensen Quartz III 85 year 2012
CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control
An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.
A top-loading batch cleaning system Render is available. Pump capacity: 140l/min, cleaning bath fill volume: 130l, max. operating temperature: 130°C, load capacity: 120kg, connected load: 16kW, machine dimensions X/Y/Z: approx. 1350mm/1200mm/1350mm, weight: approx. 350kg. Includes a transport cart. Documentation available. An on-site inspection is possible.
Linde used chirogenic spiral food freezer Crygoline series type XF 700.
CTP HEIDELBERG SUPRASETTER A 52/ A 75 ATL -Year 2009 Thermal CTP -Laser Type: Laserhead (64 diodes, 160 mW, 2540 dpi ) Gen II -Approx 78.000 plates, 3.600 hours of work -Min. Plate size: 240x240 mm -Max. Plate size: 676x760 mm -Speed: up to 17/22 plates/hour -Manual plate loading -Internal plate punch Bacher system with 2 positions -Autoloader - ATL two plate storage cassettes ( max capacity of 50 plates in A1 size ) -Automatic paper separation from plate to plate -Heidelberg Prinect Metashooter included, computer and monitor -Always under Heidelberg Italy maintenance -Available in June, in very nice conditions
PUREGEN PGA 3672 SIMPLEX SYSTEM MAKE : PUREGEN GROUP OPERATION : AUTO BACKWASH SYSTEM DIMENSIONS : 36" Ø x 72" H FLOW RATE : ≈ 25 m3/hr MAX OPERATING PRESSURE : 150 PSI MATERIAL : STAINLESS STEEL SS304 WATER QUALITY : UP TO 10 MICRONS C/W JKKP DESIGN APPROVAL EACH FILTER C/W SUPER MICROSITE FILTRATION MEDIA WHICH CONSISTS OF 6 LAYERS OF ADVANCE DESIGNED MEDIA : ACTIVATED CARBON GREEN SAND SILICA SAND FINE SAND COARSE SAND QUARTZ STONE PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 04
A Wolf checkweigher with an integrated weighing unit Wipotech IW 40K is available. Infeed conveyor length: 600mm, weighing conveyor length: 700mm, outfeed conveyor length: 600mm, belt width: 400mm, direction of travel: right-left, max. product weight: 17kg, graduation: 1g, max. weighing weight: 15kg, throughput: approx. 200 products/min. Machine dimensions X/Y/Z: approx. 1300mm/500mm/1300mm, weight: approx. 200kg. Documentation vorhanden. An on-site inspection is possible.
A Happel layer palletizer is available. Products: bags/cartons/bundles/containers/drums, package rotation: 90°/180°/270°, pallet format: 800mm/1200mm, max. pallet height: 1500mm, min. product dimensions X/Y/Z: 150mm/150mm/40mm, max. layer weight: 150kg, max. palletizing capacity: approx. 2500pieces/h. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2500mm, weight: approx. 2500kg. An on-site inspection is possible.
Roll line WP Rollmeister - WP Rollmeister - 4 rows - Stainless steel - Rollmeister bread roll line - Details see pictures
Manufacturer: Nutek Model: NTM530WSXL-1800-3-AW Year of Manufacture: 2010 Machine length: 1800 mm Belt segments: 3 Maximum PCB width: up to 460 mm (XL size) Maximum PCB length: up to 460 mm (XL size) Voltage: 230 VAC, single phase Power: 250 VA Weight: 190 kg CE Certified Find more here - / Contact us at -
1.1 Kw. 400 V. 50 Hz. 2.5 A. Very little use. With 4m arm. The mobile extraction system reliably filters the fumes and dusts produced during welding work with non-alloy steels and stainless steels. The unit is IFA approved for welding fume class W3. The degree of separation is greater than 99%. The clean air then returns to the work area. Made in Germany.
1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.
Work piece handling system manufactured in 2014. This LOHMEIER Schräglademagazin features adjustable material lengths of up to 12,000 mm and can handle materials ranging from 20 to 120 mm. It has a maximum load capacity of approximately 30 kg per meter of magazine length and includes pneumatic material alignment to the machine axis. If you are looking to get high-quality handling capabilities, consider the LOHMEIER Schräglademagazin we have for sale. Contact us for further details.
A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.
Chocolate Enrobing Machine Dedy 220 Mesh belt width 220 mm Belt speed infinitely adjustable Working direction from left to right Stainless steel version Connection 220V Used machine as good as new & SAB tested with warranty + spare parts service
Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2070x800x2500 mm Weight: 450 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2570x1100x2490 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2000x800x2500 mm Weight: 400 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
On offer is a flour storage and dosing system from professional bakery production, used. It is an interconnected industrial plant for the storage, dosing and weighing of flour. The plant is designed as a functional system and is suitable for bakeries, food production and industrial dough production. Extensive documentation available (including manufacturer's documentation, explosion protection documentation). Plant components: - 3 flour silos (REIMELT/ Daxner) outdoor area, metal version) - 2 REIMELT flour dosing and weighing systems - Hoppers, dosing devices, discharge units - Pneumatics, pipes, valve technology - Weighing units and controls Modernization: Extensive technical overhaul and investment in the plant (piping, components, etc.). The plant is currently located at our customer's site in Pasewalk and is being sold due to restructuring. A viewing is expressly recom ...
Ethos X Microwave Extraction -Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)
A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 500kg, operating hours: 27305h, load hours: 10050h. 2) Compressor Rotorcomp, max. operating pressure: 15bar, max. operating temperature: 110°C. 3) Pressure vessel IPL, year of manufacture: 1997, volume: 1000l, max. operating pressure: 10.5bar, max. operating temperature: 50°C. 4) Air dryer German Blast BT-220. 5) Water separator. Documentation available. An on-site inspection is possible.
COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – built in 2011 For sale is a complete waste wood disposal plant of the Rudnick & Enners brand, built in 2011. The line consists of 20 positions and was used for the automatic removal, sorting and processing of rinds, chips and waste wood in a sawmill. The plant has a modular design, dismantled, in very good condition and immediately available. Technical Overview – Items 1 to 20 01 – TKF offset by reducer, W 600 mm 02 – Viborinne 1 trimming line, L 13.0 m, W 650 mm 03 – Viborinne 2-trimming line, L 15.0 m, W 650 mm 04 – Viborinne creel line, L 8.50 m, W 500 mm 05 – Viborinne 1-gang line, L 10.0 m, W 500 mm 06 – Viborinne 2-creel line, L 9.0 m, W 500 mm 07 – Viborinne creel roller table, L 7.50 m, W 500 mm 08 – Viborinne resawing line, L 11.0 m, W 650 mm 09 – Viborinne recut li ...
Fully driven roller conveyor Approx. 670m total length Year of construction 2017 Roll width 600mm Consisting of - Different element lengths : 3m elements / 2m elements / 1m elements - 16 scales - 15 curves of 90° each - approx. 20 rollers stroke - turner / corner turner - 3 x Apollo spiral conveyors Location : 42781 Haan Ready for collection from 01.08.2026
Two Belimed cleaning and disinfection devices RDG with integrated drying are available. Washing chamber dimensions X/Y/Z: 690mm/630mm/800mm, usable volume: 350l, coarse filter: 2mm, fine filter: 1.5mm, drying temperature: 110°C, air filter: HEPA H13, separation efficiency: 99.95%, A0 disinfection value: 3000. Machine dimensions X/Y/Z: approx. 1850mm/900mm/950mm, weight: approx. 400kg. Documentation available. An inspection on site is possible.
3-row layout Output up to 3,000 pieces of SQUARE or ROUND rolls p/h Weight range for square rolls approx. 40 – 150 g/piece Weight range for round rolls approx. 40 – 85 g/pc (incl. knitting drum 55/80gr) completely stainless steel clad with TOUCH computer control incl. div cutting rollers incl. 3 stamps / + # + sun with humidification and turntable sprinkling station Application: e.g. rustic rolls, shaped rolls, round rolls Ciabatta, cobbler's boys, mini baguette, etc...
Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-
Dimensions (L/W/H): 3500 x 3500 x 6000 mm Filter capacity: 216 m² Number of filters: 121 (11x11) St. From the closure of the window construction company ---------------------------- Nestro filter system with various fans Automatic shaking-extinguishing line including Heizomat feed for wood chips with transport to the silo ---------------------- Info: Outside: Intermediate filter, Heizomat, fans and pipes must be dismantled by yourself. Switch cabinets (fans, control, Heizomat feed) already disconnected by electrician and ready for shipping. Dimensions approx.: ---------------------- Filter system: upper part: length 3.4 m x depth 3.4 m x height 3.0 m lower part: length 3.0 m x depth 3.0 m x height 1.9 m adjustable feet: height approx. 0.9 m filter hose length probably 2,500 mm filter area probably 216 m2 heating system feed length 3.8 m x depth 1.4 m (technical information according to ...
Bread roll system Year of construction 2010 consisting of: Head machine MINI REX Futura Proofer G 2000 with Stüpfler for Kaiser, with long-rolling station
Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible.
- Tested and cleaned Bread roll system - For round or elongated products mobile Stainless steel clad digital control Working width 600mm consisting of: Head machine type K4 Weight range up to approx. 110gr Direct settling device for baking trays or proofing carriers with long-rolling station Trigger length adjustable 60/40 or 60/80 or 60/100cm
Chocolate enrobing plant, Fabr. Savy & Sife,Type XM2000
Dough dividing and rounding machine, King, Mini Rex
A refrigeration system / drinking water storage tank from the companies DK-Kälteanlagen / Daxner is offered Technical data: Manufacturer: DK-Kälteanlagen GmbH Emsdetten/ Daxner Model/ Type: KWE 950 with Aggr. SIL AGD 4590 ZTZ Year of Make: 2022 Capacity: 950 ltr. Max. operating overpressure: 6 bar Max. operating temperature: 95 degrees C Standards: DIN 4753, DIN 1988 Refrigerant: R 449A Corrosion protection: Two-layer enamelling The device is part of a complete sourdough plant, which is offered in a separate advertisement. It is currently with our customer in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, w ...
Key data: 190 mm, 190 mm, 250 mm
Trotec SpeedMarker 300 – Laser Marking Machine | YOC. 2021 | Laser new 2025 For sale is a Trotec SpeedMarker 300 in very good condition. The laser source was completely renewed at the end of 2025 – the machine is technically as good as new and ready for immediate use. Technical data: - Manufacturer: Trotec Laser - Model: SpeedMarker 300 - Year of construction: 2021 - Laser source: new (renewed at the end of 2025) - Marking software: SpeedMark - Cooling: Air-cooled - Included: Extraction system Areas of application: - Marking and engraving of metals (stainless steel, aluminum, brass, etc.) - Marking of industrial parts - Serial numbers, barcodes, logos, data matrix codes
used
Pallet circulation system for double walls and filigree ceilings - 56 pallets; L=10.00 m - W= 3.00 m - Longitudinal and transverse transport equipment - Storage and retrieval machine for storage and retrieval - Curing chamber - 1 tipping station - Stacking places - Exit car - Concrete spreader - Turning device - Control Fabr. Beckhoff - Steel processing Filzmoser
used
Pallet carousel system for filigree ceilings, Fabr. EBAWE = consisting of: - 52 pallets; L= 12.50, W.= 2.50 m - Longitudinal and longitudinal transport equipment - Stacker crane - Curing chamber - Stacking places - Exit car - Cleaning stations - Autom. Concrete spreader - Plotter - Steel processing
maximum number of results exceeded
please refine your search
