soco system used for sale

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

2019 WK Systemtechnik ILS 600 – HTL – Ionline Lubrication System Dickschickt preservation system. The oil is applied via nozzles The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly. By spraying using two-substance nozzles, the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered. The forming medium is in a closed circuit; the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock, so there is no environmental pollution. General data Dimensions (WxHxD) without conveyor units 2486mmx2080mmx2722mm Dimensions with open doors 3265mmx3510mmx2722mm Weight approx. 2500 KG Electrical connection Supply voltage 400 Volt / 50 Hz Power 15kVA Fuse protection 35 A Control v ...

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

Key data: 6 Meter

Machine Type: Plasma Inverter Cutting Machine Make EP-Systems Type M 40.60 Connection voltage: 1 x 230 volts, setting range: 15 – 40 amps, duty cycle: 60 % ED at 40 amps 100% ED at 30 amps Current adjustment infinitely variable max. quality cut 2 mm max. cut-off cut 5 mm Cooling inverter through built-in fan Cooling burners by compressed air Portable assembly system design Fuse 16 amps Dimensions L x W x H 470 x 250 x 250 mm Weight 10 kg Age 5 years Condition workshop-tested new incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece plasma torch PH-70, 6 mtr. long 1 piece ground cable 1 piece compressed air hose 1 Piece Instruction Manual Warranty 12 months from the date of delivery Original price €1,750.00 + VAT Price kpl. with the above accessories €159.00 + VAT _____________________________ ...

1. Process Engineering Equipment - VA VA-02. Glycol Regeneration System (C 612) 2 double-tank systems, type DPC160-27/5.0/35k/A, built in 1991 Fully functional, cleaned, skid-mounted system - complete unit Manufacturer: Klöpper Therm Dortmund Unterste Wilms Str. 21 44143 Dortmund Tanks: Dillinger Steel Construction Technical Data: Each system consists of 2 tanks – sheet steel construction, diameter approx. 0.88m; length approx. 5.60m; weight per tank approx. 2.80 t; volume per system approx. 4700 l; Motors: SCHORCH KE 9132 M BA014-7; 6.8 kW; 380/660 V; 13.6A; 14400/min; SCHORCH KE3160C-HB012-Z; 5.5/7.5 kW; built in 1991; 380 V; 13.4/14.4 A; 720/14400/min; Find more here - / Contact us at -

SNA-03. Other and Auxiliary Systems Air Technology Systems a) 1 unit Type Wolf KG 160/9391, functional, Built: 1991 b) 1 unit Type Wolf KG 40, functional, Built: 1991 c) 1 unit Type Eichelberger NSR 315, functional, Built: 1991, Rooftop system Manufacturer: Wolf Anlagen Technik GmbH Technical Data: a) 15,400 m³/h; 10 kW; 380V; 1500 rpm; 710 Pa b) 2,400 m³/h; 0.6 kW; 380V; 1500 rpm; 300 Pa c) 3,500 m³/h; 1 kW; 380V; 1500 rpm; 450 Pa Motors: a) 71M06 SIEMENS 1MA5163 4BB; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 b) 71M08 Loher ENCV090 SB 84A; 0.6 kW; 380V; 1500 rpm; 50Hz, Built: 1991 c) 71M07 FLENDER ENGV160 MB02A; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-06. Air Technology System, 2 units WOLF KG 100, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH & CO.KG Technical Data: 6750/6050 m³/h; 15 kW; 1500 rpm; 650 Pa Motors: 65M01 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M02 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M03 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M04 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Additionally, 2 refrigeration compressors DWM Copeland, Built: 1992 Type DMRH 750EWM/000; Capacity 26.5 m³/h; 1550 rpm Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

Manufacturer: Kohnle Model: Hardening System Year of Manufacture: 1995 Voltage: 400/230 V Frequency: 50 Hz Current: 220 A Power: 100 kW Find more here - / Contact us at -

We are offering for sale a EuroPallet complete system consisting of the following components: - Block destacker - Skid nailer - Skid inserts - Deck board insert - Main nail machine - Skid milling machine - Burning device - Corner saw - pallet stacker - Outfeed conveyor This offering includes a variety of makes and models, assembled from multiple sources. The equipment spans model years from 1980 to 2005, providing a diverse and robust setup. The system is designed for efficient operation, requiring only three personnel. It currently produces approximately 150 pieces per hour, with potential for significantly higher output through minor adjustments or upgrades. Find more here - / Contact us at -

2020 Viscotec Semi-automatic syringe filling system for dronabinol. The filling system is equipped with a storage container for heating the dronabinol to 60 – 70° C and keeping the Temperature constant during the filling process. The syringe is filled through the syringe tip and under a protective gas atmosphere (e.g. argon). No air should remain in the syringe. The filling system is suitable for the filling amounts of 265 mg, 530 mg or 1060 mg with tight tolerance limits. The dosing accuracy of the Pharma Dispenser 3VHD8 (0.35ml / U) amounts 1%. The repeat accuracy is > 99%, depending on the material. Detailed material data are currently not available. The determination of the actual dosing accuracy and dosing time takes place during commissioning. The customer is taking care of the process development. The storage container has a capacity of 500 ml and withstands a pressure of 0  ...

Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available.

WEIGHING SYSTEM FOR BIG BAG SUPPORTING AND FILLING STATION, The system includes a sturdy painted carbon steel structure to hold 2 big bags, the pneumatic system to fill them from a source, a diverting valve set to fill the bags alternatively and automatically, a weighing platform on which tha bag rests, with loading cells and a digital scale to check and set the weight of each bag ., price options: new machine bespoke to project

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 7.750 mm including transmission group, max diam. 3.000 mm.(exceptional transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle type, N.1 loading hopper with conveying screw  ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

Hitachi Chromaster HPLC System Merck Hitachi Chromaster HPLC System composed of -CM 5160 pump, 600 bar, manual purge, quaternary gradient 0.001-5.0 ml/min Degasser integrated -CM 5310 Column Oven 1-85 Celsius, 300 mm Colomn -CM5260 autosampler, thermostated -5430 DAD/Diodenarry detector 190-900 nm, analytical cell 13 ul organizer Used system

Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system with its small dimensions of 188 x 80 x 98 mm can be easily installed in or on production plants. The print head reaches top speeds of more than 180 m/min and has IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is via an i-Logic button. In addition, maintenance statuses can be shown on the display. The Integra One is particularly compact with dimensions of 188 x 80 x 98 mm and was specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard Cartridge Monitoring identifies the current ink type and autom ...

Manufacturer: Göpel Electronic Model: OptiCon BasicLine Year of Manufacture: 2011 Type of Machine : AOI System Voltage: 230V / 50Hz Current: 10A CE Marked: Yes --------------------------------------------------------------- Find more here - / Contact us at -

Manufacturer: Bär Type of Machine : Coolant Cleaning System Year of Manufacture: 2015 Voltage Supply: 3L/ N/ PE 400 VAC / 50 Hz Control Voltage: 24 V DC Connection Rating: 185 kW / 350 A Max. Fuse Protection: 400 A Minimum Cable Cross-Section: 240 mm² Find more here - / Contact us at -

Manufacturer: Walter Metz Type of Machine : Container Washing System Condition : New Compatible with pallets and large four-wheel containers (660L & 1100L) Find more here - / Contact us at -

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate (0,30-0,40 Kwh/kg), Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you can save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit ,  ...

Paint System for Engines(Year of Manufacture: 2019) Technical Data: - Footprint: approx. 26m x 9m - 118 skids - Average cycle time: 49 seconds - Process time: 97 minutes (approx. 1.5 hours) - Maximum capacity (3 shifts): approx. 258,000 units/year Main Components: - Loading and unloading area with continuous floor conveyor system - Automatic robot paint booth with dry separation system incl. recirculating air unit - Painting robot Series T2 with hollow wrist - High-performance automatic spray gun LZ-2013 - b+m cap cleaner APRA 12 for automatic spray guns - Manual paint booth with dry separation system - Exhaust systems for manual paint and adhesive spray guns - Fresh air unit - Flash-off zone incl. recirculating air unit - Chiller 1 – recirculating air temperature 40°C - Chiller 2 – recirculating air temperature 20°C - Dehumidifier - Reverse osmosis system and water softener -  ...

Manufacturer: NanoFocus Model: Usprint 3D Inspection System with Bauman Year of Manufacture: 2014 Condition : Excellent Control Operation Voltage: 24 / 400 V Nominal Current: 17.3 A Electricity Type: 3-phase Frequency: 50 Hz Compressed Air: 6 bar Supply Line Fuse: 25 A (slow-blow), 16 A (fast-acting) Nominal Power: 4.6 kW CE Marked Find more here - / Contact us at -

Applikon Pilot System 50L fermentation system Stainless, 50L pilot fermentation system

Manufacturer: Lutzke Year of Manufacture: 2008 Type of Machine : Adhesive Bonding System Find more here - / Contact us at -

Putzmeister sewage sludge conveyor system with a maximum delivery rate of 6-7 t per hour and a pressure of 100bar (including pumping) Is no longer in the pit in the pictures, has been cleaned and stored. Fully functional and hardly used Design data (organic) Medium Conveying medium: Sewage sludge Material definition (Fluid I / Fluid II) (1): Fluid 2 Dry matter content: 25 to 30% Type of dewatering: Centrifuge Precipitant (4): Polymer Maximum particle size: 5 mm Type / size of foreign bodies (6): Wood, glass, stones / 80 x 80 x 80 mm Flowability: Like moist soil Temperature of the medium: +5 to +20 °C Density of the medium: 0.9 to 1.1 t/m³ pH value: 6 to 8 Gas formation: None Loss on ignition (5): < 40% Rheological behaviour: Thixotropic Aggressive: No Abrasive: Yes Corrosive: No Sticky: Yes Further data: Installation location: Outside Ambient temperature: -5 to ...

• DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). • Output max. 400 items/min, belt speed 5 - 90 m/min • Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Various other readable code types, including Pharmacode • Product run from left to right • Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) • Ejection belt 300 mm long • Product height max. 150 mm, product width 45 - 130 mm • Bad product ejection by pneumatic pusher with collecting container • Ejection countercheck • Central height adjustment for printer and camera • Light barrier for product detection (trigger) • 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 • 3 installation positions for camera: front (as-i ...

• DataMatrix station for marking and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation) • Output max. 400 objects/min, belt speed 5 - 90 m/min • Datamatrix-code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules • Several other readable codes, a.o. pharmacode • Operation direction from left to right • Product take over by alignment belt, consist of lower (length 500 mm) and height adjustable top belt (length 400 mm) • Discharge belt length 500 mm • Product height max. 100 mm (optional 150 mm), product width 45 - 200 mm, max. product width incl. open flaps 240 mm • Bad ejection by blower nozzle with collection container • Ejection counter control • Central height adjustment for printer and camera • Light barrier for product identification (Trigger) • 1 LAN PCE camera Mini-smart, plain text/code control  ...

TBVE (TVE-ESCALE) ESCALE – Three Bath Open Width Washer Model: High Efficiency Washing Range (Washing Range – ESCALE) Manufacturer: TVE-ESCALE (TBVE Group) Year of manufacture: 2023 Condition: Good, fully operational Configuration: 3-bath open width washer with 3 evacuation (vacuum) slots – one per scour bath Documentation: Manual available Status: Available for sale Three heated wash bays, counter flow, working width of 2800mm fabric specs of 100gsm – 400 gsm (can be used on heavier cloth successfully) all plc controlled with three evac slots (one on each wash bay) input from roll or plated, output plated. --------------------------------------------------------------- Machine Description The TVE-ESCALE High Efficiency Washing Range is an industrial open-width textile washer designed for high-quality washing, scouring, and bleaching of fabrics. The system combines bath ...

Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - / Contact us at -

Plant for the production of caustic soda PROMINENT SYSTEMS Tank and dosing system for cleaning systems in the food sector, such as bottling plants - Storage tank DVS 2205 made of PE-100 - Fall arrester - Dosing system - Container diameter: 1,640 mm - Container height: 2,000 mm - Net volume: 4 m³ - Everything regularly maintained and TÜV tested - Condition: Mint Viewing by arrangement

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately

System Overview Each line consists of one gravity roller conveyor, one gravity acceptance piece, and one chain conveyor. The system is designed to transport pallets linearly by gravity over a defined gradient using braking rollers. All components feature a robust sheet steel construction with galvanically zinc-plated carrying rollers. Height adjustment is provided via threaded spindles (M20). The maintenance-friendly design ensures continuous operation and easy replacement of individual assemblies. 1. Gravity Roller Conveyor ( 6 pieces ) Transports goods linearly over a defined gradient on carrying rollers. Features premium braking rollers with a three-stage planetary gear for progressive braking and extremely smooth start-up. - Conveyor width FB: 926 mm - - Total width GB: 1066 mm - - Conveyor length FL: 3600 mm - - Parking space length SL: 1200 mm - - Inlet height EH: 320 mm -  ...

1 of used dryig system, consisting of main assembly (hood with Tetra conveyor frame) with hood, Sonic Air Systems blower with Leroy Somer motor type 256TC / 3x 400 V / 50 Hz, 20 HP / 27.6 Amp. (with Danfoss VLT 5000 VFD in separate panel), and 3x Sonic Air Systems airknives each 3" body diameter and 610 mm slot length With manifold from 1 to 3 hoses. Hoses not available. Control panel not available (was switched from combined line conveyor control panel).

General SKU276P412 MakeGericke (CH) TypePTA 20 No.20.3032 Year of construction2004 LocationBarneveld Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume20 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity20 Ltr Dished topcheck Dished bottomcheck Top connectionsCone valve DN200 with actuator Outletdia.50mm (butterfly valve with actuator) Information Mounted on consolesmobile With switchgearcheck Floorspace1,2x1,0 M Total height1,3 M Weight170 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...

General SKU276P418 MakeGericke (CH) Type50 No.50.3012 Year of construction2004 LocationBarneveld Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D500xd180xh450mm) Outletdia.50mm, with butterfly valve and actuator Max. temperature80 degr.C. Information Mounted on consolesmobile With switchgearcheck Floorspace1,9x1,0 M Total height1,5 M Weight250 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU276P415 MakeGericke (CH) Type50 No.50.2154 Year of construction2002 LocationBarneveld Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4541 (321) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D500xd180xh700mm), with butterfly valve and actuator Outletdia.50mm, with butterfly valve and actuator Information Mounted on consolesmobile Floorspace1,1x0,8 M Total height1,8 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU276P416 MakeGericke (CH) Type50 No.2003 Year of construction1992 LocationBarneveld Pressure Working pressure3.9 Bar Main Features MaterialStainless steel Volume50 Ltr. Pressure3.9 Bar Specified Features - Pneumatic conveying system MaterialStainless steel 1.4571 (316Ti) Pneumatic air conveying systems Capacity50 Ltr Dished topcheck Dished bottomcheck Top connectionshopper (D600xd180xh700mm) with butterfly valve with actuator Outletdia.50mm, (butterfly halve with actuator) Max. temperature80 degr.C Information Mounted on consolesmobile Floorspace1,2x0,8 M Total height2,0 M Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU054U425 MakeAZO TypeACW-7/6 Mach.No.2224/2225 Year of construction1996 Main Features Volume6 Ltr. Specified Features - Pneumatic conveying system MaterialStainless steel Pneumatic air conveying systems Capacity4-6 KG Information Mounted on framecheck LocationBarneveld Floorspace2 x 1,5 m Total height1,75 m Weight750 kgPneumatic conveying systemsAZOConveying systems > Pneumatic conveying systemsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Pre AOI - Automated Optical Inspection System Koh Young Pre AOI systems use high-resolution optical imaging and advanced inspection algorithms to verify component presence, placement accuracy and solder paste coverage on PCBs prior to reflow. Integrating a Pre AOI station into an SMT line significantly reduces defect rates, rework costs and scrap by catching errors at the earliest possible stage in the assembly process. Find more here - / Contact us at -

Manufacturer: Koh Young Year of Manufacture: 2022 Machine Type : Post AOI - Automated Optical Inspection System Koh Young Post AOI systems use high-resolution 3D optical imaging and intelligent inspection software to verify solder joint quality, component placement and board integrity after reflow soldering. A Post AOI station is an essential quality gate in any high-reliability SMT production line, preventing defective boards from advancing to final assembly, test or customer delivery. Find more here - / Contact us at -

Pallet handling system manufactured in 1992. This FL SYSTEME F05.10 FLG features 42 rows with 4 levels, each accommodating 2 pallet spaces. The frame height is approximately 7m, with a total length of about 90m. The crane is essentially included free of charge, and the price includes dismantling. If you are looking to get high-quality pallet handling capabilities, consider the FL SYSTEME F05.10 FLG machine we have for sale. Contact us for further details.

A complete cut-off grinding system is available. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking device. 4) Bar rotating drive and measuring station. 5) Weighing station with section sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic power unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible.

Key data: 1200 m³/h, 1 kW

For sale I offer a mobile welding fume extraction system Kemper cartridge filter system 7000 from 1997. and is given. The extraction system is in good condition for its age and has hardly been . Shipping available for an extra charge. Extraction is tested and sold immediately ready for use with a new UVV test and operating instructions. # Extraction # Kemper # System # 7000 # Fume extraction # Cartridge filter # Extraction system # Mobile

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

Manifold System Satorius with 3 stainless steal funnel (100ml) for microbiological research

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

Kiener Skinetta Pac-Systeme ASK-300 bundler and stretch wrapper, output up to 32 packs per minute. Maximum reel width 300mm. Maximum final pack dimensions 380mm (W) x 360mm (L) x 290mm (H). Includes stacking unit.

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,