soco system used for sale

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

see performance data on photo with data

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

Bread roll system Kövy KA 2 4- deer hourly output 4800 pcs. for 60x40 and 60x80 cm tilting planks Baker's condition ready for action

This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB

Process chiller / chiller air-cooled, Type: TAEevo Tech 251 P5 MTA S.p.A. TAEevo Tech 251P5 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P5 high-pressure circulation pump. Cooling capacity kW 48.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 8.26 Available pump pressure (bar) 4.93 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 29 Max. current (A) 50 Starting Current Circuit (A) 149 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1034 Connection Rp 2 " Serial No.: 2200384598 Year of construction 2022 Condition: Optical 2, Technically ok Used Price: on request in Eur ...

A compact extraction system for light applications of the Laser marking, coding and engraving. AD-Access combines cost-effective operating costs with performance, which is adapted to smaller laser applications. A three-stage Filter status display and three-stage filtering are standard Included: DeepPleat prefilter, HEPA range and chemical range. AD Access is an ideal solution for beginners to secure Working conditions for the operator and product quality Maintain.

HUNKELER POST-PROCESSING SYSTEM (unwinding, punching, turning, rewinding) The line consists of: Position 1: UNWINDER HUNKELER UW4 G 7119 (M. No.: 659595 // Age: 2001) Position 2: CROSS and LENGTH CUTTER HUNKELER AM 520-W 7150 (M.No.: 1509697 // Age: 2004) Position 3: TRANSFER STATION HUNKELER PU 520-W 7150 (M.No.: 2010062 // Age: 2008) Position 4: PUNCHING & PERFORATING UNIT HUNKELER DM 520-W 7152 (M.No.: 1509697 // Age: 2004) Position 5: TURNER HUNKELER WM 520-W (M.No.: 1509697 // Age: 2004) Position 6: CUTTER (TRANSVERSE and LENGTHWISE)HUNKELER CU 520-W 7154 (M.No.: 1509697 // Age: 2004) Position 7: CRISS CROSS DELIVERY ERTEC STSC-2 (S.No.: 34 // Age: 2008) Position 7.1: Brand new (never used) FOLDING UNIT FS4 7127 (M.No.: 1509697 // Age: 2004), can be used instead of the display Position 8: CRANE

BOFA's Advantage 350 suction and filter system effectively removes potential harmful vapours and particulate matter produced during the laser marking process arise. By maintaining a dust-free operating range, the System to protect valuable devices, a labeling of continuously higher To achieve quality, reduce scrap rates and reduce pollutants. The low-noise and compact Advantage 350 system is ideal for use light laser marking applications in schools, among others, Sign workshops and small industry.

Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...

Hot melt adhesive application system Adhesive Application, Hot Melt Glue Gun Make HBB Heinrich Bühnen GmbH Type WCH 1146 CE Serial No. 46-1007-04 PROline tank system Year of construction approx. 2004 Maximum power consumption approx. 1860 watts Electricity connection 230 V Current consumption 8 A Protection class IP 32 Electronic temperature controller grado 905 Operating temperature 135 – 230°C Heating capacity tank 1200 watts Melting capacity 4.5 kg/h Warm-up time approx. 20 minutes Hot melt adhesives as granules or block goods Usable tank volume 4.5 liters With heated hose type HP With hot melt adhesive hand applicator With instruction manual

Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke

Process cooler, chiller, chiller - air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 902 P3 – 178 kW TAEevo Tech 902 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 90 Max. current (A) 160 Starting Current Circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Ye ...

Dissolution Tester for testing the release of active ingredients from drugs. Incl. UV/VIS Spectrometer PerkinElmer.

Pilz safety system PNO m0p 773110, stocked goods, no functional test, manufacturer number: 773110. EAN number: 4046548013153

HausER composite system with 4 compressors Bitzer, 3 pcs. 6J-22.2Y and 1 pcs. 4G-20.2Y with control box, all wired The composite system can be used for plus as well as for minus.

Specifications: • RKT refrigeration dryer for the treatment of compressed air • 10 bar operating pressure • 4 kW • 400 V • 570 l/min effective delivery rate • ECN pressure vessel 270 l powder-coated • Duplex filter set WBF 63 MFO/CA consisting of Microfilters and activated carbon filters incl. automatic float trap (for paint booth) • Oil-water separation system KON-C2 incl. inlet and outlet fittings • 2 fully automatic tank drainage valves KN 1.230 Year of Make: 2025 Price: We ask for your binding offer. Available from: immediately Terms of delivery: ex location – EXW Berlin Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Bitzer double composite system with 7 compressors. 4 of them are 6H-25.2Y and 3 of them are 4G-20.2Y

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

Double composite system BITZER for plus and minus, consists of 5 compressors. Negative composite consists of 2 pcs. compressor 4DC-5.2Y-40S Plusverbund consists of 3 pcs. compressor 4GE-20Y-40P Including switch box

Bitzer CO2 composite system type TPS4-2FHC-3K with 4 compressors type 2FHC-3K for TK

TEKO composite system with 4 PCS FRASCOLD compressor type Z30.126. With control box

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

TEKO composite system with 4 pcs. FRASCOLD compressor type S20.56Y With control box

Composite system with 2 PCS. DORIN compressor, 1pcs. Type H850CC and 1pcs. Type H1002CC, 38.26 m³

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

Guntner condensator 150kW GVHX080,1B/2x1-MD.E 1200Eur Guntner condensator 264kW GVHX080,1B/2x2-MD.E 1400Eur Guntner condensator 289kW GVHX080,1B/2x2-ND.E 1500Eur Guntner condensator 32kW GVHX 050.1A/1-ND.E - 400Eur Guntner condensator 17kW GVM 040.1B/2-NW.E - 180Eur 2sht Guntner condensator 20kW GVM 040.1C/2-NW.E - 200Eur 3sht Guntner condensator 50kW GVH065.1A/2-X.E- 600Eur 1sht KUBA CA.06-1x2F OHNE VENT.E. 35kW - 700Eur LUVE SHVN 48/8 45kW - 400Eur LUVE SHVN 57/0 55kW - 500Eur LUVE SHVN 157 H/V 155kW - 1800Eur DT15K R404a VERY GOOD CONDITION!

Fortuna Head Machine Type: KM5 5 rows Weight range: 35-80 grams Hourly output: max. 5500 pieces With flour spreader cut + round off analog control can also be synchronized with a proofing cabinet 400V 50Hz Height: 170cm Width: 200cm Depth: 100cm

Description 3,000 litre tank of RT water 04-B-100 4.000 liter tank acid 03-B-100 4,000 litre tank lye 02-B-100 2,000 litre tank of fresh water 01-B-100 2 x Soaking tank 27 m3 Material: 1.4301 Weight: approx. 2000 kg Service conditions: Inner container druchkos, 20°C when cleaning 85°C Execution: Surface inside bright rolled III c Surface outside of polished III c Seams sanded inside Ra < 0.8 μm, except fillet welds Seams stained and brushed on the outside N11 1 Piece DN 200 DIN 11850 Spout N10 1 piece DN 65 drainage nozzle with strainer N9 N8 N7 Company Sign N6 1 piece DN 25 DIN 11850 Cable conduit (ends flared) N5 1 piece DN 50 DIN 11850 inlet N4 1 piece DN 500 manhole with limit switch Schmersal N3 2 pieces level sleeve N2 1 piece DN 25/65 CIP removable N1 1 piece DN 250 Vent with vapour drain 2 x hot water tank 15 m3 Material: 1.43 ...

FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller  ...

FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...

with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...

FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...

Packaging line consisting of: 1 4-chamber VA silo with bucket elevator, 1 multi-head scale MESOMA combinat 14S, type MD300/ME400, No. 11.02.-069, year of construction 1996, 1 flow wrapping machine MESOMA MD300, , 1 metal detector CINTEX,1 checkweigher OCS Ec, No. 1002883, year of construction 2005, with conveyor belt and dispenser, No. 11825/11208804, year of construction 2011, 1 packaging machine JP KV400, No. 362/2005, with control panel SIEMENS Simatic panel, 1 labelling and carton closure system COMARME gema 470, No. AZ026245, year of construction 2005 with labeller BLOHME Advanced.01, No. 10388, 1 carton folding machine BEDO VA 985, No. 985.1.52496, year of construction 1997

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.

We sell a Lippelt Mini Rustica with guillotine and punch. Good bakery condition

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...

Key data: 24 , 30 , 400

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

Waffle Cup Making Machine There are 4 different machines available, for different cup dimensions. Model: BM-260 - Mocaccino Model: ВМ-200 - Latte/Cauccino Model: ВМ-120 - Americano Model: ВМ-80 - Espresso Steps for production: - Preparation of the dough for the waffle cups - Production of the wafer cups on a cup production line - Preparation of the chocolate mass (melting of the chocolate briquettes/drops and tempering) - Pour the chocolate into the cup and turn the cup over so that the chocolate residue runs out of the cup - Cooling of the cups of chocolate on the work tables - Packaging of finished products in bags Technical data: - Number of molds per matrix: 32 pieces - Volume cup : 80 / 120 / 200 / 260 ml - Capacity: 320 - 480 cups per hour - El. Power: 18 kW - Weight: 655 kg - Dimensions: (L х W х H): 1,080 x 800 x 1,440 mm

Manual cleaning system for printing tools Type: HC-1000 Year of Make: 2020 good condition, fully functional, incl. stainless steel castors and various accessories (see photos) This revolutionary cleaning system is ideal for thorough and gentle cleaning of printing tools. Thanks to its well thought-out design and equipment with durable components, it meets the highest standards of efficiency and ease of use. Its detergent is non-volatile (VOC-free), fully recyclable and NEVER needs to be replaced thanks to the integrated recycling system. This saves time, reduces operating resources and disposal costs and also protects people and the environment. Features: - Completely solvent-free - Cleaning agent is recycled - No liquid waste - No explosion protection necessary - No suction necessary Equipment: - Flexible hose holder for precise work - Four sturdy stainless stee ...

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

CIP set - Moravek 5sa - Second Hand Moravek CIP 5SA designed to CIP and fully sanitises the keg filler and Moravek BC30 Beer carbonator with or without optional BF30 sterile filtration module. The Moravek CIP 5SA can also be used to CIP brewery conditioning, bright beer tanks and vessels up to 65HL (circa 2m internal diameter) when fitted with specified Alfa Laval spray ball cleaning heads as well as other ancillary brewery equipment Output flow adjustable range 500-5000 LPH Output pressure adjustable range 0-3 bar Capacity of tanks 2x250 litres Installed electric power max. 24kW Designed for cleaning BC30 Beer Carbonator, BF30 sterile filtration module, Can Pro 9/2 Filler/Seamer plus associated brewery storage tanks and vessels The unit is a mobile unit and can be used for CIP cleaning in other parts of the brewery as well. Measurements: Height: 1700mm approx. Length: ...