soco system used for sale

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...

Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3500 mm - Hook height approx. 2800 mm - Crane track length approx. 5000 mm - Height approx. 3900 mm - UK crane carrier approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3900 mm - 2 longitudinal suspension carriers approx. 5000 mm - Cross suspension carriers approx. 3500 mm - Weight of the plant approx. 1000 kg

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YO ...

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. Bof7x8gtdey The price quoted is net plus 19% VAT. OUR USED EQUIPMENT S ...

The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtra ...

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

Supply air heating system, NW250, 400V, 9KW, KMS, mint condition -80% Special price ! The current new price of a similar product is more than € 8,000 excluding VAT. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Top condition like a demonstration unit! The part was removed from a new machine that has demonstrably only run for approx. 100 operating hours. Technical data: - Supply air heater 9 KW - Heating cartridge with heating cross 400V 3x3000W - Incl. pipework, complete design in stainless steel + pipe insulation - Incl. corrugated flex sleeves - Stainless steel intermediate non-return valve AWS ZRK-VA-VA-200-F - Assembled incl. stainless steel mounting bracket - Price is without HEPA filter and Ex centrifugal fan, we are happy to offer - Parts list and drawing from KMS - Inlet side NW250 - Outlet side NW250 reduce ...

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

working length: 2500 mm Working width: 1650 mm Working height: 850 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

working length: , mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mathis THN 10988 Laboratory Thermosal Plant Use This foulard-dryer combination has proven itself excellently in practice. It is used in this way for a wide variety of hot air treatment processes such as drying, fixing, condensing, thermo-isolating, etc This system is used wherever a certain sample size is already required, for example to produce sample collections or the like. Dryer THA If the foulard and dryer are to be used separately in addition to continuous operation, the THA type dryer should be chosen. Attached to this device are a unwinding unit at the dryer entrance and a pull-out unit at its exit. This element determines the speed of goods in individual operations. This offers the advantage of using the foulard and dryer independently and at the same time. For drying, fixing, condensing, etc., the goods are then put on the dryer. If all the previously listed ap ...

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...

Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x

Bito two-storey mezzanine system Multi-storey complex of Bito For large assortments and high picking performance Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage space. At the same time, the height of the warehouse is used optimally By integrating shelving racks, direct access to all general cargo is possible, even if your range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving on lower floors, slow-moving on top), which significantly increases the efficiency and speed of your warehouse management Make: BITO Type: C-hole profile Year of Make: 2020 636 m² (per floor: 212 m²) Floor + 2 storage levels (ground floor/1st floor/2nd floor) Footprint: 7,400 x 28,650 mm 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Shelf height:  ...

pHcbi MDF-DU901VHL-PE VIP ECO ULTRALOW FREEZER. The MDF-DU901VHL-PE VIP ECO -86°C ultra low temperature freezer provides maximum sample storage capacity within an optimum footprint combined with natural refrigerants to minimise energy consumption, reduce environmental impact and save money. 845 litre capacity. External dimensions (excl. handles & protrusions): 1150 x 870 x 1990mm (wdh). Internal dimensions: 1010x 600 x 1400mm (wdh). CFC free insulation and refrigerant. VIP Plus Insulation. Large LCD touchscreen Controller with graphical display of recent temperature history and USB port for data export. Fully automatic audible / visual alarm System complete with remote alarm connection. Status Alert monitors ambient and System conditions and notifies of any abnormal Operation. New EZIatch door handle with lockable outer door and with door hotline to prevent ice build up and two fully in ...

Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48 700 watts new condition with operating instructions LWH: 1600 x 600 x 1400 mm

Temperature control device Manufacturer: gwk Type: teco cs 90 N°: 11936 Y.O.M.: 2002 Heating capacity: 9 kW Rated cooling capacity: 23 kW Maximum temperature circulating medium: 95° C LWH: 900 x 260 x 600 mm

MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing unit suitable for refrigeration applications Typical applications include Freezers in supermarkets and mini-markets Cold stores Beer cellar Milk cooling systems Standard equipment Copeland Scroll M Compressor ZB series with sound insulation hood Oil sump heating Liquid collector with burst protection Filter dryers Sight glass visible from the outside Ball shut-off valves Component-tested combined HD/LP safety pressure switch Electrical equipment: control box IP 55, compressor contactor, DIN rail mounting Condenser is integrated into the housing Condenser fins coated with epoxy resin phenol (gold lacquer) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; All screws  ...

Emulsion fission system, oil-water separation system (for the de-oiling of condensation in compressors) The cost-effective and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. that cleaned water complies with the legal Rules on channel discharge

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

Refrigeration unit, refrigeration system, refrigeration system, cooling compressor, refrigeration compressor used. TEKO TPX2-112 Built in 2011 compressor 2 pieces FRASCOLD Type: S 7 56 Y 56 m3/h each 380 V Dimensions approx. 1600 x 900 x 2000 mm All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

Type APT1000 UC Universal panier system suitable for fine and coarse panning (japanese crumbs and corn flakes) complete stainless steel mobile infinitely variable speed with blow-off system with an on-reel roll Track width 1000 mm Dimensions (L x W x H) : ± 2,800 x 1,850 x 2,500 mm

Cooling & freezing chamber NN 2900x2200x2500 Type Cooling equipment Height 2500 Width 2200 mm Length 2900 mm

Sorter for light loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 trays, 261 targets - used - : Price sorter incl. control, continuous roller conveyors and pick by light (without conveyor technology) from location: 99.500.-€ (net), incl. dismantling, packed and loaded! Price of the existing Transnorm conveyor technology (approx. 170m) incl. scanner and labeller: 15.000.-€ (net) incl. dismantling, packed and loaded! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of Make: 2013 • UNIQUE PUSH TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6000 trays/h Total length of the system: 53 m Total width of the system: 14 m Number of infiltration stations: 1 Width of infiltration station: 2 m Number of trays: 200 pieces Usable size on the trays ...

ID3574 Monsuna AKS A4 year/Baujahr 2014 Tire washing system for commercial vehicles, Monsuna type AKS A4 series, including tank, control system, signaling system, and contact loop for automatic operation. The washing zone is fully galvanized. The water supply is fully integrated into the module frame. Passage zone: 4000 mm long x 3100 mm wide (clear passage width: 2900 mm). Weight: approx. 5,000 kg (2 washing modules, each with a capacity of 2,500 kg). Tank: 7000 mm long x 3000 mm wide. Weight (unfilled) approx. 3,560 kg. Tyre washing system for commercial vehicles Monsuna type AKS A4 incl. tank, control system, signalling system and contact loop for automatic operation, the washing zone is completely galvanised, water supply is completely integrated into the module frame, passage zone: 4000 mm long x 3100 mm wide (clear clearance width: 2900 mm), weight: approx. 5,000 kg (2 wash mod ...

Temperature control units Manufacturer: gwk Model: teco wv Machine no: 1) S001 2) S010 3) S030 4) 567 good condition with operating instructions Control via touchpad LWH: 1300 x 320 x 950 mm 4 pieces available

Temperature control unit Manufacturer: gwk Model: teco wv good condition with operating instructions Touch panel LWH: 1100 x 330 x 750 mm

For sale is a fully automatic cleaning and disinfection system of the type Expert 100 / T from the manufacturer Melksysteme Niedersachsen (NISA). The system is ideal for daily cleaning of milking equipment and milk lines on farms. It takes over all dishwashing, disinfection and control functions fully automatically. Specifications: Manufacturer: Melksysteme Niedersachsen (NISA) Model: Expert 100/T Function: Automatic cleaning & disinfection of milking systems Control functions: start/stop, washing programs, temperature control Flushing: Pre-, main and post-flush programmable Power supply: 230 V / 50 Hz (standard connection) Condition: used, cleaned, tested

Temperature control unit Manufacturer: Lauda Type: LTH140P No.: X12217 Power: 7 kW Filling volume: 5 l Year of construction: 1999 with operating instructions

Technical data: Bandwidth / strip width min. 150mm Bandwidth / strip width max. 1,650 mm Strip thickness min. 0.4 mm Strip thickness max. 400 N/mm² 2.5 mm 300 N/mm² 3.0 mm Coil weight decoiler/ coil weight decoiler 12,000 kg Coil outer Ø / coil outer-Ø 1,600 mm

SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 μm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample Types: Supports SBS standard plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes, and microscope slides Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robot systems Voltage (U): 100 – 240 V AC 50/60 Hz Power (P): 295 VA max Created: 01/2011 More items - new and used - can be found in our shop! International shipping costs on request!

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

Hydraulic wood splitter, functional Details on request

working length: 2451 mm Working width: 1670 mm Working height: 800-1000 mm Neue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine ------------------------------------------------------- Förderanlage für Holzlängen von 300 mm-4200 mm Pos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm - höheneinstellbare Stützböcke (ca.800 mm - 1000 mm) - stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge - Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen - Förderbänder 50mm breit, in Kunststoffbahnen geführt - Antrieb ca.5-25m/min, 0,37 KW - ca.1250mm von Anschlag zu Anschlag - Übergabe als Hebesenkeinrichtung - angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge - Antrieb ca.5-25m/min, 0,37 KW - Rollenabdeckung nach HBG Pos.2 Förderband ca.3000 x 260mm - höheneinst ...