so used for sale

Manufacturer: Sonic Air Systems Year: 2007 Type: Sonic 70 Power: 5.5 kW Dimensions: - Total height: 2300 mm - Width: 1000 mm - Length: 1000 mm - Bottle inlet height: 1530 mm The machine has been renovated and is ready for installation.

Tires, solid rubber tires, forklift tires, complete wheels -Handover: in its current condition as inspected -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic, 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Sale: complete -Dimensions each: Ø 570 x 160 mm -Weight: 96 kg

For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...

tires, solid rubber tires, forklift tires -Manufacturer: Solideal, solid rubber tires 2 pieces -Tire size: 23x9-10 RIM 6.50F-10 -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 465 x 200 mm/piece -Weight: 40 kg/piece

Scale Soehnle/Conveyor Technology Scale, motorized Manufacturer: Soehnle/ Overbeck Condition: Good (used) Model No.: SNR 215158 Total length: approx. 850 mm Total width: approx. 850 mm Conveyor width: approx. 440 mm Roller spacing/centre distance: approx. 75 mm Including roller drive Overbeck SEW motor included Feet included (height adjustable) Scales incl. Overbeck roller conveyor The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Internal Article Number: 2026012702 Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loa ...

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Solideal, solid rubber tires Magnum with rim -Tire size: 18x7-8 -Bolt circle: Ø 140 x 18 mm -Recess: Ø 100 mm -Number: 2x tires available -Shipping/Price: complete -Dimensions: Ø 380 x 160 mm -Weight: 23 kg/pcs

Solar Gas turbine Taurus 65 SOLONOX The turbine and gear box is from 2022 and it only has 2000 running hours. The package is from year 2011. The condition is excellent and is ready to start working, in addition it included Solonox mode and fire extinction module. All the maintenance has been done by Turbomach official service. The equipment is already dismounted on our warehouse and ready to be load. It is available all the systems except the exhaust system that is optional. It is possible to have a visit and a inspection of the turbine. Also is available a boroscope of the turbine. YOM:2022 Power: 6300kWe Fuel: Natural Gas Working Hours: 2300 h Voltage: 6300V

Sorter for light loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 trays, 261 targets - used - : Price sorter incl. control, continuous roller conveyors and pick by light (without conveyor technology) from location: 99.500.-€ (net), incl. dismantling, packed and loaded! Price of the existing Transnorm conveyor technology (approx. 170m) incl. scanner and labeller: 15.000.-€ (net) incl. dismantling, packed and loaded! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of Make: 2013 • UNIQUE PUSH TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6000 trays/h Total length of the system: 53 m Total width of the system: 14 m Number of infiltration stations: 1 Width of infiltration station: 2 m Number of trays: 200 pieces Usable size on the trays ...

• Sorting insert diam. 550 mm made of stainless steel • Frequency control unit MFS 168 • Oscillation 3000 • Plastic housing • Height adjustable • Mobile • Electr. connection 230V/50Hz

Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Comm ...

TURBO AIRCOMPRESSOR SONDEX PLATE HEAT EXCHANGER For any enquiry, please contact : 1. email: yytantopglove.com.my 2. Contact number: i. Aaron Tan: +6017-369 8203

Mobile sorting table Cycle Sort Type B BJ 2025

old sorter for hobbyists to pick up from our customer - still running, but rather "somehow" VB 2 crates of beer

- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2005 - Working width 1.300 mm - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %

- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2007 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %

- Producer Cefla / Sorbini - Type T / 20-SP-1 - Year of construction 1997 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 174 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1640 mm - Width 2590 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 4,5 kW - Weight 2.000 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, not on stock

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2007 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2003 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1000 mm total power requirement: 22 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 10.000 x 6.000 x 4.250 m Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sovereign SOV140 OH Top labeller Serial: 526 Stainless, top labelling machine, belt dimensions 1500mm x 90mm, max label width 90mm, height adjustable labelling frame, HMI touch screen control, 1Ph

Type SOP20 / 200M / ZU No. 212772 Specifications: Load capacity 200 kg Diameter of the systems 900 mm Bandwidth max. 220 mm Spreading range approx. 240 - 550 mm Drive 0.37 kW Rotational speed approx. 15 rpm

A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible.

A Somatech carton and tray erecting machine is available. Cycle output: 60 cycles/min. The machine has been fitted with new tools and a new linear unit. Documentation available. On-site inspection is possible.

General SKU279X367 MakeSondex LocationBarneveld CEcheck TypeSonspy 1400 Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C Information No.SP10096 Year of construction2014 Mounted on framecheck Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg Extra SpecificationsSpiral heat exchangerShell and tube heat exchangersNew arrivalsSondexHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Sondex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Y ...

Various used machines for metal processing are available. 1) Eccentric press Müller ExP 10.SVBA, year of manufacture: 1977, pressing force: 10t, outreach: 160mm, stroke rate: 120/min, ram adjustment: 40mm, stroke adjustment: 72mm, weight: approx. 800kg. 2) 3x decoiler Soprem SOP/20, year of manufacture: 1992/1992/1998, load capacity: 100kg, max. coil outer diameter: 850mm, max. strip width: 100mm, speed: 22rpm. 3) Welding closing system Messer FP500K, year of manufacture: 1977, outreach: 165mm. 4) Feeding machine Felss FR16-V, year of manufacture: 2002, max. tube diameter: 16mm, upsetting shaft speed: 342rpm. On-site inspection is possible.

Pressure: 10 bar Motor: 30 kW Voltage: 400 Volt / 50 Hz Free air delivery: 4,1 m³/min Measurement (WxHxD): 1350 x 1585 x 900 Weight: 590 kg Compressed air connection: 1 1/4

Pressure: 7,5 bar Motor: 18,5 kW Free air delivery: 3 m³/min Measurement (WxHxD): 1250 x 1335 x 850 Weight: 400 kg Compressed air connection: 1

Pressure: 13 bar Motor: 4 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,39 m³/min Measurement (WxHxD): 1240 x 950 x 650 Weight: 246 kg Compressed air connection: 1/2

Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is very handy and also protected according to protection class IP65, which means that it can also be used in wet areas without any problems With only five buttons, the SOEHNLE 2790 digital display device is particularly easy to operate. The built-in functions are on/off, tare, clear tare, zero and print. In addition, the 2790 indicator also has a piece counting function. The SOEHNLE 2790 display unit can be operated not only with the 230 V power supply included in the scope of delivery, but also with batteries for up to 100 hours independently of the mains. The 20 mm high digital display is backlit when plugged in and is therefore particularly easy to read. In battery or battery operation, an automatic switch-off can also be set to protect the batteries and batteries. Soehnle ...

SODICK AQ325L wire EDM was built in 2002 in Japan by Sodick Co., Ltd. The machine, distinguished by its exceptional precision and reliability, is an excellent choice for the production of parts with complex geometries, i.e. dies, punches and tools. The electrical erosion technology used in the machining process enables difficult shapes to be achieved in even the hardest materials. This method also minimises or completely eliminates the need for other secondary processes, such as polishing. The SODICK AQ325L is designed for machining workpieces with a maximum weight of 450 kg. The machining process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.30 mm. The workhead moves in five axes X,Y,Z,U,V with feeds of 350 mm, 250 mm, 220 mm, 80 mm and 80 mm respectively. The use of a dielectric increases the surface quality and dimensional accuracy of the w ...

REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm

SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...

For sale is a used SOMIC packaging system with 2 fan conveyors (=2 formats). Tubular bags were packed, but other products that arrive horizontally from an infeed conveyor can also be packed. The Somic has a height-adjustable levelling belt where the contents of the tubular bags can be distributed before packaging. Somic had worked with Elau technology in the control area and Elau discontinued these servos and controllers. The Somic can be equipped with new Siemens control technology 1500 and undergo a general overhaul.

Used Used Packer Monoblock Buhmann Pac Solutions: Year: 2016 Condition: Good Used Packer Monoblock Buhmann Pac Solutions: Carton Former Buhmann Pac Solutions Model: C300 Year: 2016 Speed: 30 carton/minute Closure type: hot melt glue Brand and model: Nordson Problue 4 Case Packer and Carton Closer Buhmann Pac Solutions Model: modello PF800 Number of heads for packaging: 4 1 head for the closure Operation: automatic Closure above and to the side Safety protections Code: JM 105 More details: https://bottlingscout.com

Malt Mill Sommer Maltman 110, capacity 150 kg/h This Maltman 110 malt mill is suitable for micro- and small breweries and micro-distilleries Malt kernel is crushed to produce grit, whereby the flour proportion is low and the husk remains largely intact. This enables the ideal preparation of the malt for the brewing or distilling process, and it also provides a natural filter layer for purifying. It has two rolls which one is driven by an electric motor with belt drive. Rollers made of high-alloy steel - fully through-hardened and regrindable. Roller distance is infinitely variable and it can be quickly adjusted. Malt mill has inbuilt magnetic separator and foreign body ejector. Mill was manufactured in year 2019 by German Egon Sommer and it is in very good operational condition. Technical Characteristics Manufacturer Egon Sommer Maschinenbau GmbH Manufacturer’s model Maltman 110  ...

REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

General SKU290S402 LocationBarneveld MakeF. Widmann & Sohn Apparatebau (D) Type160 Ltr. No.1346B-3 Year of construction1966 Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Cooking pan Cooking vesselcheck Capacity160 ltr. Vessel sizesdia. 680x600mm With jacket31 ltr. Without motorcheck Vessel can be tiltedcheck MaterialStainless steel 1.4541 (321) Information Floorspace1,4x1,1 M Total height1,0 M Weight150 KgCooking pansF. Widmann & Sohn ApparatebauStirring vessels > Cooking pansBrand > F. Widmann & Sohn Apparatebau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

x-travel: 6.500 mm y-travel: 1.800 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mm max. workpiece weight: 13.500 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 37 kW Speed range, stepless: 15 - 7.000 min-1 max. torque: 1.045 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 35.000 mm/min max. feed force X-Y-Z-axis: 16.000 N total power requirement: kW weight of the machine ca.: 34 t dimensions of ...

Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3  ...

An integrated packaging system Soco consisting of a carton erector and a carton sealer is available. 1) Bottom flap folder Soco F-100P, min. carton width: 320mm, max. carton width: 520mm, max. carton length: 900mm, machine dimensions X/Y: approx. 750mm/1150mm. 2) Carton sealing machine Soco T-402 5-5-7, carton length range: 200mm-750mm, carton width range: 120mm-460mm, carton height range: 95mm-470mm, sealing capacity: 18/min, max. adhesive tape roll diameter: 385mm, weight: approx. 200kg. Including safety guarding, roller conveyor and transfer unit. The system is as new and has only been in operation since January 2026. Documentation available. An on-site inspection is possible.

General SKUR1406 LocationBarneveld CEcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface8 m2 Specified Features - Nutsche filter Capacity17035 ltr With jacket(85 ltr), (66 ltr) Max. temperature-30/200 degr. C Without drivecheck MaterialStainless steel 1.4435 (316L) Information MakeSolme, Societa Lavorazione Metalli (It) Mach.No.9384 Year of construction2015 Floorspace4,0x4,0 M Weight8400 KgCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceuticalAPIMinerals & inorganicAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsNutsche filtersOintmentsGeneric medicinesPowdered foodsOils & fatSolme, Societa Lavorazione MetalliIndustries > Che ...

Producer: Sorgo Description: -Sorgo Smokehouses -One room for two trolleys -One main door -Powered by steam -Dimensions; 1450 mm x 2480 mm x 2700 mm -Higth needed to install 3100 mm -Total weight 1380 kg -Steam conection: 2-4 bar -Water conection: 4 bar -Air conection: 6 bar/40l/h -Electric conection; 3/MP, 50 Hz, 380 V, 220 V -Smoke generator dimensions; 1350 x 450 x1100 -Work options; drying, cooking, cooling, smoking, infusing -Seting control by mikroprocesor Mikster (brand new) with warranty -In excelent condition 2 machines available.

Sollas S60 wrapper for cardboard packaging The plant was built in 2007 by Sollas Deutschland GmbH & Co KG. Since then it has been used for packing cartons. It has a product retraction function, so that folding boxes can also be welded with feet. ” Aggregate: wrapper s60 60 pcs. /min. Film rollers: Max. Outer diameter 400 mm Max. Roll width 435 mm Min. Internal diameter 70 mm Max. Internal diameter 83 mm Min. Cutting length 50 mm Max. Cutting length 750 mm Dimensions of the packaged goods: Length: 40 mm/300 mm Width: 20 mm/200 mm Height: 16 mm 96 mm According to the information provided by the manufacturer, the machine is designed for the following packaging materials: - Coated paper - PP - PE The machine is designed for the complete or partial packaging of products. Unpackaged food is not compatible.

Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

REF-2263 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm