so used for sale

Sommer & Strassburger Stainless steel vessel 155 Ltr.; jacket 25 Ltr.; Maximum pressure -1/6 bar; Maximum temp. 130C, mounted on stainless steel frame on wheels, down outlet diameter 50mm for clamp connection

This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details.

Sollich RTN1000 Chocolate tank 2006, chocolate tank, 100Kgs capacity with adjustable temperature control, top mounted motor with agitation and scrape surface, 3Ph

This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022. It features a table size of 1,400 x 670 mm, with an impressive X-axis travel of 1,270 mm and a Z-axis travel of 625 mm. The machine is equipped with a maximum spindle speed of 12,000 RPM and a tool magazine capacity of 40 stations. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details.

CONTROLS   electronic controls OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 200 mm   sheet thickness max.: 4.5 mm   coil weight max.: 0.5 to DECOILER   coil weight max.: 0.5 to   mandrel expansion range from: 250 mm   mandrel expansion range up to: 550 mm LEVELLER UNIT   sheet width max.: 300 mm   sheet width (min): 20 mm   sheet thickness max.: 4 mm   sheet thickness min.: 0.5 mm   material cross section max. (450 N/mm2): 800 mm²   number of leveller rolls: 7   diameter of leveller rolls: 65 mm   number of infeed-/outfeed rolls: 4   diameter of feed rolls: 65 mm   drive power: 1.5 kW   loop controls: yes ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: ...

A full USNR automatic saw mill, - Log yard with debarker and sorting, - canter chipping line, - 3x quadro bandsaw, - 2x automatic edger line, - Almab drop sorting line for main products, - USNR drop sorting line for side products

Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

x-travel: 6.500 mm y-travel: 1.800 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 8.000 x 1.100 mm max. workpiece weight: 13.500 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 37 kW Speed range, stepless: 15 - 7.000 min-1 max. torque: 1.045 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 35.000 mm/min max. feed force X-Y-Z-axis: 16.000 N total power requirement: kW weight of the machine ca.: 34 t dimensions of ...

SORMEC heat press with: - 3000x1300mm assembled tops - 2 intermediate shelves / 3 load compartments - 6 lower hydraulic pistons, 600m stroke - Hydraulic pistons for blockboard mounted on the 1300mm side - with electric water boiler Machine not compliant with CE regulations, for export VISIBLE INSTALLED AND OPERATING UNTIL JUNE 2026

Packaging capacity: approx. 30pieces/min, side belt height: 50mm, max. carton dimensions X/Y: 515mm/505mm, min. carton dimensions X/Y/Z: 140mm/90mm/80mm, tape width: 50mm, weight: approx. 200kg. An on-site inspection is possible.

This 4-axis DN SOLUTIONS LYNX 2100GA was manufactured in 2021. As new, showroom model. It features a maximum spindle speed of 6,000 RPM and a bar capacity of 45 mm. The machine is designed for high-performance compact turning, optimized for small precision parts. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100GA horizontal turning machine we have for sale. Contact us for further details.

x-travel: 10500 mm y-travel: 1200 mm z-travel: 1600 mm control: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mm spindle speeds: 20 - 2000 mm voltage: 380 V total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 200 mm centre distance: 1.000 mm spindle turning speed range: 1600 U/min spindle bore: 42 mm turning length: 1600 mm turning diameter over bed: 410 mm : 230 mm machine weight ab.: 1.700 kg dimensions: 2000 × 1000 × 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

length: ca. 4.000 mm Working height: ca. 900 mm Weight: ca. 2.500 kg Return transport / mechanization suitable for Weinig Univar for transporting entire window sashes, panels or similar large workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg

number: 93 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 102 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 80 Positionen weight: 150 kg condition: neu : 28 mm dimensions: 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Curtain coater for flat pieces 2 coating heads, each with a pump Usefull coating width: 1300 mm Working heigth: 850 mm. Workpiece transport by interrupted belt 3x length 3000 mm Feed speed 20 - 120 m/min power 3,9 kW

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1?) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2?) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Sheeter Seewer Rondo â Product description âœ" Manufacturer: Seewer Rondo âœ" Type: UNIC-SOLO C âœ" Condition: used, functional, bakery condition âœ" Manual operation âœ" Side belt foldable âœ" on rollers, mobile  Details see pictures.

Sotemapack Robopac Monoblocco 70 Cardboard Collator and Wrapper  Almost new - 2021 Purchased for a project to pack large pizza boxes in layers, currently set up for packs of five or six. Only used for a few weeks due to contract change.

Inv. Num. : 9031 Type: DEF FA 85 Producer: Soco Generated: Parameters: Machining length: 25–320 mm. Diameter: 25–85 mm.

Machine Details - Manufacturer: Sodick - Model: AD55L - Year of manufacture: February 2016 Electrical Specifications - Supply voltage: 200 V - Phase: 3-phase - Frequency: 50/60 Hz - Rated capacity: 8.5 kVA - Full load current: 24 A - RMS symmetrical amps: 50 A Operating Hours - Total operating hours: 3050 - Machining hours: 1470 - Included Accessories - Electrode holder - Approximately 20 clamping brackets - 1 dial gauge - DI and electrical components installed in the machine Additional Information The storage system expired in 2022. DI unit and all electrical components are installed and remain with the machine. A test piece can be machined upon request prior to purchase Find more here - / Contact us at -

Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3  ...

245 x 150 x 180 cm

General SKU279X367 MakeSondex LocationBarneveld CEcheck TypeSonspy 1400 Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C Information No.SP10096 Year of construction2014 Mounted on framecheck Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg Extra SpecificationsSpiral heat exchangerShell and tube heat exchangersNew arrivalsSondexHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Sondex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Y ...

x-travel: 9000 mm y-travel: 3200 mm z-travel: 1900 mm w-axis: 700 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Drehverschiebetisch 2 Stück table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Workpiece interferece circle diameter: 2500 mm Orthotic head power: 46 kW Aggregate (pick-up max. 6 positions): Quill diameter 130 mm Orthotic head 1x1 degree Horizontal milling attachment Henninger angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and ac ...

x-travel: 8000 mm y-travel: 2600 mm z-travel: 1500 mm V-axis: 3000 mm control: Siemens 840 D SL Table: Schiebe- und Drehtisch 2 Stück table load: max. 20 t turning speeds: 100 U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 43 kW number of tables: faceplate: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Ortho head 1x0.001 degree Turning tool holder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...

x-travel: 6000 mm y-travel: 4750 mm z-travel: 1500 mm control: Siemens 840 D SL Table: Verschiebetisch table load: max. 20 t turning speeds: U/min coolant: Tool changer: 120 pos. tool taper: SK 50 size of pallet: 2200x1500 mm spindle power: 46 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us.  ...

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Walter & Sohn, frequency converter from the BRANDT KM 35 edge banding machine -Type: 501921522 / FU5 / 6 / 132LJD / 60 -Input: 380 V 50 Hz -Output: 220 V 200 Hz -Power: 5 KVA -Protection class: IP54 -Dimensions: 510/325 / H260 mm -Weight: 63 kg

Terminal and trim box, road cell -Terminal box: for up to 4 load cells -Inputs and outputs: via PG screw connections -Protection class: IP 65 -4 inputs, cable gland M12 for cable diameter: 2 to 6.5 mm -1 output, cable gland M20 for cable diameter: 7 to 12 mm -Number: 2x available -Price: per piece -Dimensions: 205/110/H70 mm -Weight: 0.8 kg

Descaling pump, universal suction, pressure and circulation pump -Device: for problem-free descaling -of smaller water systems such as heating coils, gas flow and Circulating heaters, water boilers, etc. -Drive: 220 volts -Max. Delivery rate: 6 l/min -Max. Delivery head: 40 m -Dimensions: 420/420/H410 mm -Weight: 9 kg

Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: Witt & Sohn, Mushroom head hood type PK wd 500 x-schw. VZ -Hood opening: mechanically lockable, handwheel -Bolt circle Ø 550 x 12 mm -Quantity: 2x hoods available -Price: per piece -Overall dimensions: Ø 905 x 820 mm -Weight: 89 kg/unit

Roof window roller shutters, blinds, roller shutters, roller shutter motor, tubular motor, radio tubular motor, roller shutter radio motor -Manufacturer: elero, roller shutter radio motor radio tubular motor -Type: RolTop M30-868 sonro -Torque: 30 Nm -Radio remote control: not included -Dimension: Ø 60 x 540 mm -Weight: 2.1 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: F4 -Item no.: 05.F4.SOC-1220/ -Power: 0.9kVA -Number: 19x frequency converters available -Price per piece -Dimension: 225/90/H115 mm -Weight: 1.3 kg/pc.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert Type: F4 -Item No.: 07.F4.SOC-1220/ -Power: 1.6 kVA -Quantity: 1x frequency converter available Price: per piece -Dimensions: 225/90/H115 mm -Weight: 1.3 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: KEB, frequency converter Drive Controller Combivert -Type: F4 -Item no.: 05.F4.SOC-1220/ -Power: 1.6kVA -Number: 3x frequency converter available -Price per piece -Dimension: 225/90/H115 mm -Weight: 1.4 kg/pc.

Drilling machine, drill press, pillar drill, column drill -Manufacturer: Solid, column drill type SHW 30 -Motor power: 1.1 kW -Speed speeds: 70 - 1980 rpm, 7 levels -Table size: 270 x 270 mm, travel 630 mm -Clamping table: pivotable on vice device -Spindle holder: MK3 with drill chuck -Spindle stroke: 120 mm -Throat: 280 mm -Column Ø: 110 mm -Accessories: including foot control -Dimensions: 860/640/H1850 mm -Weight: 273 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Sonnenschein charger dryfit TL 24V 260-300 Ah -Input voltage: 220 V -Power: 24 V / Battery capacity 260-300 Ah -Quantity: 1x charger included -Dimensions: 600/410/H450 mm -Weight: 40 kg

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Manufacturer: Commercy Soudure, welding rotating device swiveling -Type: PM 250 -Load capacity: see photo nameplate -Control: with foot pedal -Three-jaw chuck: Ø 314 mm, bore Ø 100 mm, base plate Ø 600 mm -Speed: max. 3 rpm right/left rotation -tiltable: via crank -Transport dimensions: 1190/720/H900 mm -Total weight: 267 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type SOG -Speed: frequency controlled -Conveyor belt length: 2400 mm -Belt spacing: 400 mm -Drive: SEW-Eurodrive 0.075/0.37 kW 280-1400/14-72 rpm -Number: 5x conveyor belt available -Price per piece -Dimensions: 2450/940/H460mm -Weight: 155 kg/pc.

Centrifugal pump, water pump, stainless steel pump, food pump, peripheral impeller pump, coupling housing magnetic coupling centrifugal pump -Manufacturer: Sondermann, coupling housing for magnetic coupling centrifugal pump -Type: MA-EFSK-24-200-1,1/35 -Dimensions: see photo dimensions -Dimensions: 230/215/H230mm -Weight: 8kg

Servo drive, servo card, output module, CPU card, frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, power module, U/E module -Manufacturer: Soprel, servo controller type PWME 140x8/16 -PN.: 7.31.715 41916 / 1088 -Quantity: 1x module available -Dimensions: 320/210/H65 mm -Weight: 2.6 kg

Servo drive, servo card, output module, CPU card, frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, power module, U/E module -Manufacturer: Soprel, servo controller type PWME 140x14/28 -PN.: 7.31.711 44476 / 1288 -Quantity: 1x module available -Dimensions: 310/210/H60 mm -Weight: 2.7 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Handover: in current condition as viewed -Tire wear: see photos -Manufacturer: Solideal, 2 pieces of tires with tube and rim -Tire size: 23-5(150/100-13) -Pressure:bar -Bolt circle: Ø 162 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 27 kg/piece

rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table -Manufacturer: Sopap, compact rotary table -Type: Ta 160-12-270-2-D -Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12 -Speed: 8 rpm / 12 intervals -Brake: 40 Nm -Individual components: see photos -Dimensions: 700/610/H390 mm -Weight: 212 kg