141,102 used machines on RESALE, but how to find them? Machine Search
Plate dimensions: 3000x1350 mm Daylight opening: 400 mm Number of daylights: 1 St. Heating: 31,5 kW Specific pressure: 2,5-5,0 kg/cm² Total pressure: 90 t Motor output: 1,5 kW Dimensions (L/W/H): 3480x1500x2000 mm weight of the machine ca.: 5000 kg Year: Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4200x1650x2150 mm Weight: 7500 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2950x1550x2950 mm Weight: 4000 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4200x1650x2250 mm Weight: 7900 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.
A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000k ...
Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...
x-travel: 710 mm y-travel: 250 mm z-travel: 400 mm table-size: 1200 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 50 - 2500 U/min quill stroke: mm total power requirement: 2,2 kW weight of the machine ca.: 1,7 t dimensions: 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cup Ø: - mm depth: - mm NUMBER OF TURNS: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pneumatic tilting table / Conveyor, Allows a good working position during carton filling., The tilting table operates as an inclined packing table. With a compressed air control activated by a foot pedal, the tilting table straightens., - Round objects that are difficult to pack into boxes wrap more easily on a tilted table., - Space-saving solution. The tilting table can be fixed right opposite a semi-automatic carton closer., Dimensions (mm): 575x570 H 775
20,000 bottles per hour Pros: •High labeling speed •Automatic feeding and precise positioning of the bottles •Modular design for different bottle sizes and shapes •Easy to maintain and cost-efficient in operation Machine Condition: •Used machine in good condition •Previously used in the beverage industry •Regularly serviced •with spare parts Labeling stations 2 × cold glue 3 × self-adhesive 1 × tax label
Key data: 600 mm, 400 mm, 350 mm
For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...
Ultrasonic cleaning system for anilox rollers and other parts. By means of a cleaning fluid and ultrasound, the rotating anilox roller is cleaned.
General SKU340X780 LocationBarneveld CEcheck MakeK-Tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter220 mm Specified Features - Metering screw Metering screwcheck Screw diameter35 mm Pitch50 mm Shaft diameter15 mm Screw length250 mm InletDia. 220 mm OutletDia. 110 mm With DC motor0,45kW, 200V, 2000RPM Without controlcheck Screw speed120-600rpm With breaking/mixing shaftcheck Metering screws MaterialStainless steel 1.4571 (316Ti) General TypeK2m-T35 No.11240198/800890 Year of constructionunknown Floorspace0,85x0,45 m Total height0,4 m Weight50 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedC ...
NISSEI FREEZER soft serve ice cream machine Water-cooled 400 volts 2.5 kWh H 150 x W 54 x D 84 cm 250 kg
SOMAT Food Waste Reduction Disposal Composter DH-100W Somat DH-100W Stainless Steel Dehydrator System
General SKU381X957 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter150 mm Specified Features - Metering screw Metering screwcheck Screw diameter2x 35 mm Pitch10 mm Shaft diameter40 mm Screw length400 mm Capacity± 50 l. Hopper sizesø 200/400x880 mm Inletø 150 mm Outletø 100 mm With DC motor0,45 kW, 200 volt, 2000 rpm, With breaking/mixing shaftcheck Metering screws MaterialStainless steel 1.4301 (304) General TypeK-ML-KT35 Atex No.310358/MO-73640 Floorspace1,10 x 0,70 m Total height1,30 m Extra SpecificationsWith LWF D5 platform scalePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDai ...
Roller conveyor curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90° degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Wheelbase: approx. 110 mm Roller Type: Plastic Material: Steel/Plastic Color: Zinc Plated, Light Gray, Orange Including 2 motors Soco 0.12 KW Stock: 4 pieces Price per piece The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Internal Article Number: 2026020302 Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutio ...
number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION! Tools are designed for 25mm thick tabletops. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.
General SKU300W571 LocationBarneveld MakeSociete Nouvelle Usifroid Syrius TypeMinilyo SMH 45 Main Features MaterialStainless steel Vacuumcheck Surface0.6 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,6 m² Number of plates4 Plate sizes508x305x40 mm Between the plates56 mm With cooling compressorcheck Cooling mediumFX 80 MaterialStainless steel 1.4404 (316L) General No.18022 Year of construction1998 Mounted on wheelscheck With switchgearcheck Floorspace1,29x0,88 m Total height1,95 m Weight700 kg Extra information Process de-icing, hot gas, Nominal ice cap, 20 kg With laptop control Powdered foodsGeneric medicinesFine chemicalsBiotechnologyFeed additivesFreeze dryersCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPISociete Nouvelle UsifroidIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicin ...
This 3-axis DOOSAN dnm 4505 vertical machining center was manufactured in 2024. It features a robust FANUC 0iPLUS control system, a spindle speed up to 12,000 r/min, and a table size of Φ1000 x 450 mm with a loading capacity of 600 kg. The machine also includes a 24-tool capacity ATC, rapid traverse rates of 36/36/30 m/min, and a high spindle motor power of 18.5/11 kW. For more information about this vertical machine center, please reach out to us.
CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)
This 5-axis DMG Sauer Ultra sonic 50 universal machining centre was manufactured in 2006. It features a Siemens 840 D control system, a 16-fold tool changer, and a fully protected cabin with safety doors. The table size is Ø 630 x 500mm, supporting a load of 200kg. Ideal for diverse machining needs, the DMG Sauer Ultra sonic 50 machine we have for sale is a robust addition to any workshop. Contact us for more information.
This 3-axis DOOSAN DNM 5705 vertical machining center was manufactured in 2024. It features a robust table size of 1300 x 570 mm with a loading capacity of 1000 kg, and a high spindle speed range of 8,000 to 12,000 rpm. Equipped with a BT40 tool shank type and a rapid traverse rate of 36/36/30 m/min for X/Y/Z axes, it ensures efficient machining. Ideal for precision tasks, buy this DOOSAN DNM 5705 vertical machining center. Contact us for further details regarding this machine.
This SORBINI SmartCoater SP1 was manufactured in 2009. It features a working speed of 5–20 m/min and can handle workpiece widths up to 1,350 mm and thicknesses up to 100 mm. It includes SUPERFICI UV lamps and a VENJAKOB conveyor belt, enhancing its efficiency in wood production. For more information about this machine, please reach out to us.
used industrial equipment, 135 pieces in total: - Quantity 4 – Leroy-Somer Mentor MP MP1200A6R – 850 kW - Quantity 2 – Leroy-Somer Mentor MP – MP550A4 – 200 kW - Quantity 2 – Leroy-Somer – SPMD1404 – 160/200 kW - Quantity 1 – Leroy-Somer Mentor MP – MP350A4R – 125 kW - Quantity 1 – Leroy-Somer – SP6402 – 110/132 kW - Quantity 1 – Leroy-Somer Mentor MP – MP210A4 – 75 kW - Quantity 1 – Leroy-Somer Mentor MP – MP155A4 – 56 kW - Quantity 1 – Leroy-Somer – SP5401 – 55/75 kW - Quantity 2 – Leroy-Somer – SP3401 – 15 kW - Quantity 4 – Leroy-Somer – Unidrive M700 – 11/15 kW - Quantity 3 – Leroy-Somer – SP2402 – 7.5 kW - Quantity 2 – Allen-Bradley – 20AC015A0AYNANC0 – 7.5 kW - Quantity 6 – Drive 380-480 V – 4.0/5.5 kW - Quantity 1 – Leroy-Somer – SP1406 – 4 kW - Quantity 10 – Allen-Bradley – 20AC8P7A0 ...
Key data: 3 , 40 , 14
Capasity 14,4 m3 Pressure 40 bar rpm 1450 power demand 3,6 kW
1 of used dryig system, consisting of main assembly (hood with Tetra conveyor frame) with hood, Sonic Air Systems blower with Leroy Somer motor type 256TC / 3x 400 V / 50 Hz, 20 HP / 27.6 Amp. (with Danfoss VLT 5000 VFD in separate panel), and 3x Sonic Air Systems airknives each 3" body diameter and 610 mm slot length With manifold from 1 to 3 hoses. Hoses not available. Control panel not available (was switched from combined line conveyor control panel).
General SKUCX003 MakeBHS Werk Sonthofen Maschinen- und Anlagenbau GmbH LocationBarneveld TypeFEST A9 -UNI Main Features MaterialStainless steel Motor15 KW Surface2.16 m2 Specified Features - Rotating vacuum filter Rotating vacuum filterRotary pressure filter Filter surface2.16 m² Drum sizesDia. 800x1800 mm Motor15 kW, 690/400 volt, (EExdellCT4) With variable speed drivecheck Drum speed300-1500-1800 rpm MaterialStainless steel 1.4571 (316Ti) General No.300263 Year of construction1994 Floorspace2,80x1,90 m Total height2,30 m Weight±7600 kgPowdered foodsStarchBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesRotating vacuum filtersFood additivesSugarAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsMinerals & inorganicBHS SonthofenIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > Bi ...
General SKU202X016 MakeABL Anlagentechnik/ OFRU LocationBarneveld TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck Distillation Capacity510/55l Specified Features - Distillation MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) General No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgear( as is) ATEX designedcheck Extra information Was used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as well Fine chemicalsOther chemica ...
General SKU336T901 LocationBarneveld MakeJ. Engelsmann AG Main Features MaterialStainless steel Motor1.5 KW Length700 mm Specified Features - Sorting sieve Sorting sievecheck Sieve surface1.9 m² Number of sieve decks:2 Number of fractions:3 Sieve sizes700x680 mm Sieve perforation5,5-1,5 mm With covercheck InletDia: 150 mm OutletDia: 140 mm, Dia: 110 mm (2x) Unbalance drivecheck Motor1.5kW, 220-240/380-420 Volt, 940 rpm Variable speed drivecheck With extra sieve decks1 MaterialStainless steel 1.4541 (321) General TypeM3.C.187/3-1.4541 Mach.No.30059 Year of construction2006 Mounted on mild steel framecheck With switchcheck With switchgear(as is) Floorspace4,5x1,9 m Total height1,6 m Weight2100 kgPowdered foodsTea, herbs & coffeeStarchBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesSugarLubricants & oleoConfectio ...
General SKU336T902 LocationBarneveld MakeEngelsmann TypeM3.C.187/3/1.4541 Main Features MaterialStainless steel Motor1.5 KW Length700 mm Specified Features - Sorting sieve Sorting sievecheck Sieve surface1,9 m² Number of sieve decks:2 Number of fractions:3 Sieve sizes700x680 mm Sieve perforation5,5-1,5 mm With covercheck InletDia: 150 mm OutletDia: 140 mm, Dia: 110 mm (2x) Unbalance drivecheck Motor1.5 kW, 220-240/380-420 Volt, 940 rpm Variable speed drivecheck MaterialStainless steel 1.4541 (321) General Mach.No.32516 Year of construction2007 Mounted on mild steel framecheck Floorspace4,5x1,9 m Total height1,6 m Weight2100 kgPowdered foodsTea, herbs & coffeeStarchBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesSugarLubricants & oleoConfectioneryDyes & pigmentsAPIMinerals & inorganicPaints & coatingsSorting sieve ...
press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm
This 3s Sodick AG55L die-sinking edm machine was manufactured in 2008. With a magazine capacity of 32 positions and a maximum workpiece weight of 1000 kg, it offers robust capabilities for precision machining. The X travel reaches 550 mm and Y travel extends to 400 mm, making it suitable for various applications. Consider the opportunity to buy this Sodick AG55L die-sinking edm machine. Contact us for further details.
General SKU237S136 LocationBarneveld MakeCollette (BE) Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume50 Ltr. Motor10 KW Specified Features - Universal mixer Gral-granulatorVactron Capacity75ltr (nett 50 ltr.) Vessel sizesdia.525x400mm With covercheck Inletdia. 50mm (1x) with funnel, Dia. 35mm (1x) Pneumatic operated outletcheck Outletdia. 140mm With motor10 kW, 415 Volt With variable speed drivefrequency control (variable) With lump breakercheck Rotor speed1500 &: 3000 rpm MaterialStainless steel 1.4401 (316) General TypeVactron GRAL 75 Mach.No.84 MG7527 Year of construction1997 With switchgear(as is) Floorspace1,8x1,0 M Total height2,0 M Weight1200 Kg Extra information A mixer-granulator with microwave drying including: vacuum pump Busch type Huckepack 425013 2001 microwave generator thermal oil heater Conair Churchill type TC ...
This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us.
General SKU217K043 LocationBarneveld MakeBHS Sonthofen GmbH TypeAutopress AP-300/4 No.305013 Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Filterpress Filter press:Gas-tight, fully automatic filter press:(1x) Filter surface0,5 m2 Stainless steel plates(1.4571) Number of platens4 + 1x top- and 1x bottom plate Internal platen sizesdia. 310mm Cake capacity5 Ltr (at 20mm plate distance) Hydraulic closingcheck With hydraulic unitcheck Motor3,0 KW, 400/690 Volt (Ex) MaterialStainless steel General Year of construction2000 Floorspace2,9x1,2 M Total height2,0 M Weight2000 KG ATEX designedcheck Extra Specificationsinternal platen size: dia. 310 mm Technical specs Extra informationinternal platen size: dia. 310 mmPowdered foodsGeneric medicinesFilterpressesTea, herbs & coffeeFine chemicalsStarchBiotechnologyAgrochemicalsPlastic & polymersCata ...
This STEFANI Solutions 86 edgebander was manufactured in 2009. It features Nordson equipment, a maximum glued edge thickness of 25 mm, and a maximum panel thickness of 60 mm. The machine includes electric height adjustment, upper belt pressure, and a preheating zone. It also boasts interchangeable roller storage with 12 positions and a replaceable glue pot. Consider the opportunity to buy this STEFANI Solutions 86 edgebander. Contact us for more information about this machine.
General SKU294N388 LocationBarneveld MakeBHS Werk Sonthofen Dimensions Filter width80 cm Material Product contact materialStainless steel 1.4529 (926) Main Features MaterialStainless steel Motor15 KW Surface2.25 m2 Specified Features - Vacuum belt filter Vacuum belt filter:Enclosed indexing vacuum belt fliter: Filter surface2,25 m² Filter width800mm Number of sections:6 Without motor(pneumatic) Knife discharge(knife blade not included) With vacuum pumptype PMMZF 3813 D3 Motor15 KW, 500 Volt With vacuum tankcheck MaterialStainless steel General TypeBF 5 /4.5-KD Year of construction1997 Floorspace7,0 x 2,0 m Total height2,5 m Weight5000 kgPowdered foodsStarchBiotechnologyAgrochemicalsCatalysts & fillersPaper & otherOrganicsSugarOther feedMinerals & inorganicVacuum belt filtersBHS SonthofenIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Star ...
BSI Plate Mixer, Designed to mix BSI NGV-type containers (1125x1325mm), Maximum weight to mix (with the container) 800Kg, Maximum permissible load: 800kg (with the container), Number of tanks sold: 0, Maximum admissible load: 800kg (with container)
General SKU311P699 LocationBarneveld CEcheck Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket5.5 Bar Main Features MaterialStainless steel Volume75 Ltr. Motor0.55 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity75 Ltr Dished top sidecheck With covercheck Top connectionscheck Outlet70 mm With jacketcheck With paddle stirrercheck Motor0.55 KW With jacketcheck General MakeT Giusti Limited (UK) Year of construction1991 With switchgearcheck Floorspace1.8x1.3 M Total height2 M Weight830 KGPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuti ...
Manufacturer: Koh Young Year of Manufacture: 2022 Model: aSPIre 3 Machine Type : Advanced 3D Inspection Machine Power: 2.2 kW Voltage: 220 V AC +/- 10%, Single Phase, 50/60 Hz Rated Current: 5 Amp Maximum Current: 10 Amp Input Pneumatic Pressure: 0.5 to 0.8 MPa Machine Dimensions: 1000 x 1295 x 1727 mm Machine Weight: 600 kg IP Grade: IP 2X Condition: Used Technical Specifications FeatureDetailsOperating SystemWindows 10 Enterprise LTSC 64-bit Min. PCB Size50 x 50 mm Max. PCB Size510 x 510 mm Machine DimensionsApprox. 1000 x 1280 x 1520 mm (W x D x H) WeightApprox. 600 kg InterfaceSMEMA Power/Air Supply200-240 V, $4-5~kgf/cm^{2}$ Conveyor Height920 mm ± 50 mm Key Highlights & Technology Camera System: Equipped with an 8 Megapixel high-speed camera system. Resolution: Comes standard with 20µm resolution, but 15µm can be selected from the factory depending on req ...
General SKU279X362 MakeS.A. Comesse / CETAL TypeCodap 2310 cat B2 z=0.85 Steam Generator No.9467 Year of construction2013 Mounted on legscheck Pressure Working pressure21 Bar Working pressure shell21 Bar Vacuum possible shellcheck Main Features Heating (medium)Steam Capacity46.6 KW Temp.210 °C Specified Features - Temperature control unit Tube capacity25 l. Max. temperature210 °C Shell diameter140 mm Shell length1700 mm Shell connectionsDN25 Cover connectionsDN25 Temperature control units Temperating machinesteam generator Water heatercheck Electric heating46,6 kW Heating capacity25 l. Temperature210 °C With controlcheck MaterialStainless steel 1.4305 (303) General LocationBarneveld Floorspace2,30 x 0,30 m Total height0,93 m Weight60 kg CEcheck Extra information With Cetal heating tubes, type TPE, power 46.600 kW, 400 V, and control.Powdered foods ...
used
Ready-to-use, well-maintained film wrapping machine SOLLAS type 17, with tool for cartons height 65 mm x width 75 mm x length 137 mm. Max. size cartons height 85 mm x width 200 mm x length 300 mm. cycles 40/min, storage belt L 1600 mm, built in 1989, for processing sealable polypropylene film. No tear tape possible. The machine was in production until March 2024. More information on request. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details.
This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details.
Sommer & Strassburger Stainless steel vessel 155 Ltr.; jacket 25 Ltr.; Maximum pressure -1/6 bar; Maximum temp. 130C, mounted on stainless steel frame on wheels, down outlet diameter 50mm for clamp connection
maximum number of results exceeded
please refine your search
