134,097 used machines on RESALE, but how to find them? Machine Search
Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!
complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition
Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...
Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...
Spreading attachment Schmidt SST 20 – OAXN MITOS, wet salt spreader with conveyor screw. For Unimog, trucks with municipal hydraulics. Content 2 m3, Sole 860 ltr.. Equipment with tarpaulin folding roof, storage stand, height-adjustable, remote control, Optional PTO pump and hydraulic oil tank available. More winter service technology available - see example photos!
Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available
We offer you an add-on snow blower (two-way) from the company Schmidt. - Model VF-Z-55-1-004 - fully functional - Year of construction: 2001 - Total mass 1540 kg - Voltage 24 V - Working area roadways (road and rail (standard gauge: 1435 mm) - Room width 2.40 m - Ejection width 41 cm - Drive via PTO shaft front - suitable for Unimog / road-rail Unimog If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf
Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost ...
various screws up to diameter 150 mm available
Snowblower Westa Demonstration unit Hydraulic drive 3 point mount - hydraulically swivelling Pipe Hydraulic Adjustment Weight 615 kg Bolt bottom 28 mm Bolt top 25 mm
All-in-One Snow shovel, sweeper, screw conveyor Drive via PTO shaft 3 DW hydraulic units Width 2.40 m Lights Good condition, little run
Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, ...
Monitoring device, device for monitoring safety-related circuits WIELAND SNO 4003K ( SNO4003K ) 1.188.0400.1 Operating voltage ( AC ): 24 V AC 50/60 Hz Operating voltage ( DC ): 24 V DC Switching capacity: max. 400 V AC, max. 3 A switching capacity ( AC ): 230 V 8 A Switching capacity ( DC ): 24 V 4 A used, tested ! Dimensions: 195 x 97 x 23 mm
NEW, suitable for telescopic loader & Unimog wheel loader, 1 piece á € 400,-
HAKO snow blower, PTO drive . rpm.(in driving tr. left dr.), with attachment device quick coupling triangle cat. 0. Manually swivelling ejection chimneys, sliding skids. Clearing width approx. 1.15 m, clearing height approx. 1.20 m. Condition good, apparently unused, with flash rust. Chain drive for left-handed PTO. Other snow blower: Zaugg 55-110, working width 110 cm, PTO drive 1,000 rpm clockwise rotating i.F.; Discharge chute can be swivelled by hand crank, coupling plate with swivel screws. Winter service technology, used parts and more in stock, more on request ! Jodau Machine Trade Municipal, Environmental & Green Maintenance Technology Inh. Joachim Dau 24941 Flensburg, Wieselhof 29
CO₂ snow jet cleaning module from ACP – Advanced Clean Production GmbH, designed as a compact unit in an industrial control cabinet. The system works with liquid CO₂ and compressed air and is designed for automated industrial use for cleaning components and surfaces. The system is suitable for precision cleaning in manufacturing, the electronics industry and precision engineering. The device is used and shows normal signs of use due to use. It was in industrial use until recently. Scope of delivery: 1 ACP JetModule in the control cabinet Integrated media supply Integrated CO₂ mini cooler Integrated compressed air treatment CO₂ sensors Operating instructions without CO₂ cleaning heads Without nozzles Without hoses Without other system-specific accessories Type: JetModul Serial number: JM-432/E Year of construction: 2018 Project number: 1001932 Operating voltage: 400 V ...
CS 2500-KF PLUS – Industrial Roasters for Nuts, Seeds & Snacks, The robust Ceselsan CS 2500-KF PLUS is a versatile continuous rojust furnace for the industrial processing of nuts, kernels, seeds, dried fruits and snack products. The system offers uniform heat distribution over multiple zones and enables precise control of temperature, product thickness and belt speed – ideal for reproducible product quality., Bandwidth: approx. 860mm, Insertion funnel width: approx.: 860x600 mm, With dragger kettle for salting or seasoning the products to be roasted Type TZM 150 (150 liters). This doses the products in the roaster after mixing., Diameter of the filling opening: about 600 mm,, Only about 30 operating hours., Information from the operating manual of the machine:, Technical specifications, - Dimensions: 3.636 × 1.946 × 2.000 mm, - gas heated, - Electrical consumption:, - Installed pow ...
Snack wave with 7 troughs NEW!  ( 2 pieces )Snack shaft with 7 troughs made of aluminiumDimensions 580x170 mm Details see picture
Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper blade, condition as shown in photos (one is missing) -Sign height: approx. 1100 mm -Conversion to three-point linkage for tractors or forklift pockets for forklifts and wheel loaders is possible for an additional charge. -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg
Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -A conversion to a three-point attachment for tractors or drive-in pockets for forklifts and wheel loaders is possible for an additional charge -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg
Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg
maximum number of results exceeded
please refine your search
50 € 
