sn used for sale

Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available

We offer you an add-on snow blower (two-way) from the company Schmidt. - Model VF-Z-55-1-004 - fully functional - Year of construction: 2001 - Total mass 1540 kg - Voltage 24 V - Working area roadways (road and rail (standard gauge: 1435 mm) - Room width 2.40 m - Ejection width 41 cm - Drive via PTO shaft front - suitable for Unimog / road-rail Unimog If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf

Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost  ...

various screws up to diameter 150 mm available

Snowblower Westa Demonstration unit Hydraulic drive 3 point mount - hydraulically swivelling Pipe Hydraulic Adjustment Weight 615 kg Bolt bottom 28 mm Bolt top 25 mm

All-in-One Snow shovel, sweeper, screw conveyor Drive via PTO shaft 3 DW hydraulic units Width 2.40 m Lights Good condition, little run

Device for monitoring safety-related circuits WIELAND SNO 4003K ( SNO4003K ) 1.188.0400.1 24 V AC / DC Switching capacity AC: 230 V 8 A Switching capacity DC: 24 V 4 A used ! Dimensions: 195 x 97 x 23 mm

Series limit switch EUCHNER SN05D12-502 10 A 250 V AC IP67 used, tested ! Dimensions: 105 x 70 x 75 mm

Circuit breaker OEZ J2MR50B ? SN354172 Rated voltage: 500 V 50 Hz Rated current: 32 A IP10 New ! Dimensions: 238 x 107 x 122 mm

Series limit switch, mechanical series position switch EUCHNER SN02K08-552-M 085910, 086558 4 switch 230 V AC 2 A / 24 V DC 2 A New, with documents ! Dimensions ( series limit switch ): 50 x 45 x 48 mm Dimensions ( packaging ): 72 x 57 x 60 mm

Switching Power Supply, Power Supply UNI-PRO, Heller SNT 5V 30A 23.035336/004 Input: 187 - 242 V 1AC 50 - 60 Hz Output: 5 V DC 30 A used, tested ! Dimensions: 190 x 115 x 275 mm

Plug-in Power Supply, Power Supply HIRSCHMANN SNT024 T40/E 943 020-001 Input: 220 V 1AC, 300 VA 48 - 62 Hz Output: +12 V DC, 0,1 A / -12 V DC, 0.05 A approx. 1.4 m connection cable used, repaired, checked ! Dimensions ( power supply ): 90 x 85 x 50 mm Dimensions ( packaging ): 135 x 90 x 65 mm

Pillow block housing, 2 pieces SNR SNC 511-609 SNC.511-609X1 Dimensions ( pillow block housing ): 255 x 95 x 130 mm New ! Dimensions ( packaging ): 260 x 210 x 135 mm

Spindle limit switches, limit switches, limit switches ETUC, ELECTROTECHNICAL EQUIPMENT BÖHLITZ-EHRENBERG SN10 S11 ( SN10S11 ) Nominal voltage: 380 / 660 V AC Nominal current: 10 A Nominal switching current: 6 / 5 A 50 Hz IP 56 Shaft diameter: Ø 14 mm Wavelength: 30 mm Groove width: 5 mm Mounting: 242 x 51 mm hole spacing: 21 mm hole diameter: Ø 13 mm New, with documents ! Dimensions: 160 x 105 x 70 mm

Screw pump ALLWEILER SNDAR/A80R46 Immersion depth: 290 mm Sieve diameter: Ø 100 mm, length: 80 mm Inner connection diameter: Ø 32 mm Thread diameter: Ø 52 mm, pitch: 2,0 shaft diameter: Ø 19 mm shaft length: 25 mm groove width: 6 mm Flange diameter: Ø 155 / 230 mm bolt circle diameter: Ø 190 mm hole diameter: Ø 14.5 mm used, tested ! Dimensions: 375 x 250 x 230 mm

Solenoid valve, directional control valve NAMUR VALVE SN4101-IP Operating pressure: 1.5 - 10 bar without control solenoid New ! Dimensions ( valve ): 140 x 40 x 30 mm Dimensions ( packaging ): 175 x 75 x 35 mm

Pillow block bearing, with spherical roller bearing GUH Housing: SNG-526 Spherical roller bearing: 22226 ISB CAW33C3 ( 22226CAW33C3 ) Shaft diameter: Ø 130 mm Base: 450 x 130 mm hole spacing: 380 mm hole diameter: Ø 28,5 x 37 mm New ! Dimensions ( bearing, assembled ): 450 x 186 x 300 mm Dimensions ( packaging ): 500 x 340 x 270 mm

Pillow block bearing, with spherical roller bearing GUH housing: SNG 524-620 Spherical roller bearing: 22224 CAK. W33. C3 Shaft diameter: Ø 120 mm Base: 410 x 120 mm hole spacing: 350 mm hole diameter: Ø 27.5 x 34 mm New ! Dimensions ( bearing, assembled ): 410 x 188 x 275 mm Dimensions ( packaging ): 500 x 340 x 270 mm

Snow Shovel SSF 20 2000 mm shield width, with spring flaps 30 degrees right/left swivel, Fork cross-section max. 140x60 mm Clearing width 1750 mm

Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal,  ...

Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose, barrier fences -Snow fence: 2.25 m wide -2 rolls: a 50 m -Price: complete -Dimensions per roll: Ø 350/2270 mm -Total weight: 230 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Working width: max. 1700 mm -Plow height: 820 mm -with: spring flaps override system -Plow: mechanically adjustable -for: Attachment to forklifts or similar -Transport dimensions: 2195/900/H1100 mm -Weight: 350 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos (one is missing) -Sign height: approx. 1100 mm -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

Throat doctrine, border throat doctrine, double-mouthed -Jaw gauge with: good and reject side -Measuring range: 3/4/5/6/7/8/9/10/12/14/15/25/53 mm -different producers -List: by the photos -Sale: only complete -Weight: 4.9 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -Transport dimensions: 3200/1900/H1690 mm -Weight: 924 kg

Snow plough Schmidt MS 39 from 2002 The scratches are in very good condition, the sign has a width of 3.9 meters

Clearing width approx. 90 cm, headlights, switchable heated handles, 220 V starting system if necessary, mint condition

Wedge snow plow, snow plug, dozer blade, plow blade, snow blade -Manufacturer: Schulte-Henke, snow plow type RKS 200 DFG 4035 A -Shield length: 2000 mm -Plow height: 520 mm -with: spring flaps drive-over system -Recording: Dimensions see photo technical. drawing -Plow: mechanically adjustable -Attachment: on a forklift or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg

Pillow block housing, 2 pcs SNR SNC 516-613 SNC.516613S1000 Dimensions (pillow block housing): 315 x 115 x 175 mm New ! Dimensions (packaging): 330 x 270 x 190 mm

Brand: SCAM Model SMT35 Year 2003 Km 900074 Euro 3 Accessories - SNOW PLOUGH ASSALONI TECNA 25 - PRESSURE WASHER METROPOLIS LT 500 - SUBMERSIBLE PUMP -GENERATOR Notes EXCELLENT CONDITIONS OF USE AND MAINTENANCE, AVAILABLE ACCESSORY DOCUMENTATION

Linear guide carriage, ball guide carriage REXROTH KWD-020-SNS-C1-N-1 R162281420 Height Guide carriage: 25.35 mm design: SNS ( narrow, normal, standard height ) nominal size: 20 mm New, with underlays ! Dimensions ( Linear Guide Carriage ): 75 x 44 x 26 mm Dimensions (packaging): 90 x 70 x 35 mm

Description: Incl. device for forklift truck Snow blade width: approx. 1500 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 600 mm, weight approx.: 150 kg

- Synchroblock - Drive cardan shaft between the two machines - Different bottle formats - Machines in good condition

Description: BENZ Single sided angle head MONO R Sawing and Snipping Unit Type of aggregate: Single sided angle head with reduced RPM type MONO R Product Line: Classic Line (grease lubrication) Tool outlet: 1x saw blade alignment Ø30 mm (fixation with flange by 2 pins Ø6 mm on pitch diameter 42 mm or by four M5-screws on pitch diameter 45/52 mm without using the flange) Weight 5.5 kg max. drive torque M2 25 Nm max. drive speed n2 8000 1/min Transmission ratio (n1:n2) 1:0.8 The price is only valid for aggregates with standard interface with HSK-F63 interface and the torque supports for the following machines: Biesse, Busellato, Felder, Hiteco, HOMAG, IMA, Masterwood, Reichenbacher, SCM 1 point, SCM 3 point, Weinig. Further torque supports on request. The unit can be delivered with different machine connections. After the purchase please let us know which machine connection / torque  ...

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

Technical data: Diameter over bed: 625 mm Turning length: 1500 mm Diameter via slide: 325 mm Spindle head shape: Cam-Lock Spindle drilling diameter: 105 mm

Type: SNZP 380.1 HX1P11 Year of construction: 1998 No. 7610158 Q = 30/167 l / min N = 60/220 l / min Drive North in EEx II Capacity: 3.3 kW, 400V Drive North N1-n2 = 33-258 min-1 Type: SK 33-R1960-112 M / 4 ED Dimensions: LWH = 2300x420x500mm Weight: 250 kg

Attachment: eccentric screw pump used Manufacturer: Allweiler Type: SNP 25.1 Version: H1P01 Machine number: 7655566/2 Year of construction: 1982 Capacity: 10L / min Speed: 230 RPM

Producer: Nowicki Type: Hercules SNV-180 Power: 11 kW Weight: 2170 kg Capacity: up to 400 kg / h Power supply: 400 V / 50 Hz - Separator for bones NOWICKI type Hercules SNV-180 - Designed for all kinds of beef and pig bones - Chamber Volume 7.7 litres - Average cycle time of 30 seconds - Press time (adjustable) from 1 to 10 seconds - Maximum pressing force 105 t - Cylinder inside 0.7 mm / cylinder outside 5 mm - High performance and efficiency (25-80% profit) Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Rotation cutter Built in 2006; working condition

Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)

CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel grinding machine steels; oscillating grinding machine Producers: REMA Type: SNS 07 Rpm: 1450 / 2900 RPM. 2-speed motor Left and right rotation Connection: 380V / 16A Power: 0.6 / 0.73 KW Wheel size: 175 / 20 mm Fully functional without coolant pump

Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg

Ties for snowbord // weight - 580 g // 6 pcs. new moulds

Control: manual Max.turning length: 1500 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:50l 2006 Made in Slovakia

Snb 400x1500p

:::SPECIFICATIONS::: CNC Model: Fagor CNC Version: 8050 TC Spindle nose: ASA 11 Spindle power: 30Kw Bench drill height: 450mm Turning diameter on bench: 920mm Turning diameter on the undercarriage: 550mm Turning length: 3000mm Number of laps: 1500 Bar clearance: 130mm Mechanical gearbox: yes Number of ranges : 2 Weight between tips: 7800Kg Turret: Manual Number of Tool Turrets: 1 Number of fixed tool positions for the first turret: 1 First Turret X-Axis Travel: 550mm Tailstock: Yes Steerer stroke: 400mm Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 5350mm Width: 2650mm Height: 2000mm Weight: 7800Kg