sn used for sale

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 30 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 470, max. head (mwc) 30, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 2150 kg, , = More information =, , Year of manufacture: 2011, Applicable  ...

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 30 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 470, max. head (mwc) 30, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 2150 kg, , = More information =, , Year of manufacture: 2011, Applicable  ...

Year of manufactur: 1991 Engine: Chevrolet 5 L., 8 cylinders, 130 hp. Drive: 4 x 4 Fuel: gas Transmission: Automatic Water tank: 568 L. Tank for snow: 2915 cm3 Weight: 2758 kg Working hours: 939 Condition: excellent

Year of manufacture: 1994 Engine: Chevrolet 5 L., 8 cylinders, 130 hp. Drive: 4 x 4 Fuel: gas Transmission: Automatic Water tank: 568 L. Tank for snow: 2915 cm3 Weight: 2758 kg Working hours: 6588 Condition: excellent

This Impulse IP-175 AbuDhabi piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for unlimited pumping of a mixture of water and air. Moreover, this pump can run dry without any worries, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , 82 m3 per hour, MAX: 22 MWK, , Several pieces in stock, , Throughput capacity: 82 m3/h, Motor brand: Hatz, Max. head: 22 MWK, Weight: 1950 kg, , = More information =, , Year of manufacture: 2023, Applicable material: Water, Empty weight: 1.950 kg, Connector size: 4 Cardan, Cargo space capacity: 1.585 l, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more informat ...

Front Cooking Regio – Station Rieber RST-11, 230 V, 96x72x139 cm Food dispenser, 230V, 3 kW, 16 A, up to 170°C, keep warm, regenerate, heated cover, light, thermal bridge, tray slide, tray rack with 8 x 1/1 GN inserts, adjustable sneeze guard glass, mobile, 2 locking wheels, original price 10782,00 €

PVC injection system - Ø 50     injection weight: 540 g     clamping force: 188 kN     distance between columns: 510x470 (retractable columns)     five-point knee system     self-lubricating knee bushes     additional PE injection system     reinforced snails (bimetal)     Techamtion controller, in it m / n: memory mold settings, multi-stage pressure and injection setting     hydraulics: Rexrot variable displacement pump     T-slots on the plates     3 pull-out cores, hydraulic unscrewing device     rotameter 4 + 4     mold temperature stabilizer set     short working time - low consumption     manufacturers documentation, service in Poland

Magnetic coupling PSP POHONY ELS 6,3 24V CSN 02 6519 ( ? SN026519 ) 345 - 147 shaft diameter: Ø 36 mm wavelength: 54 mm 5 clutch discs control voltage: 24 V DC used, tested ! Dimensions: 132 x 143 x 54 mm

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Magnetic coupling PSP POHONY ELS 10 24V CSN 02 6517 ( ? SN026517 ) 328 - 204 shaft diameter: Ø 40 mm Wavelength: 56 mm 1 groove, width: 12 mm 5 clutch discs control voltage: 24 V DC used, tested ! Dimensions: 145 x 145 x 56 mm

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 mm Max distance between boards: 750 mm Snail: 35 mm Injection volume: 139 cc / 127 grams PS Injection pressure: 2500 bar Motor: 22 kW Heaters: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4300 kg

Magnetic coupling PSP POHONY ELS 1.25 24V CSN 02 6517 ( ? SN026517 ) 4431013/63 shaft diameter: Ø 20 mm wavelength: 46 mm 1 groove, width: 6 mm number of clutch plates: 4 control voltage: 24 V DC used, tested ! Dimensions: 100 x 100 x 46 mm

EXTRUSION LINES FOR SPIRAL PE PIPES / 300/1200 Max. diameter: 1200mm Min. diameter: 300 mm Diameter pipes D 300,400,500,600,700,800.900.1000,1200.SN4 and SN8 EXTRUDER/...1 Manufacturer/ Top Industri China Model/ D.65 Year/ 2007 Serial no./ No.1234 Screw diameter/ 65 Screw L/D ratio/ 33 Output capacity/ (kg/h) 250 Main drive power/r (kW) 50 Screen changer/ (YES/NO) No Co-extrud (YES/NO) No Running hours/ DIE HEAD Manufacturer/Fabricante Top Industri China Model/Modelo K2 Year/año 2007 Serial no./ No.1234 Extrusion tools and calibration tools A total of 8 sets of tools for extrusion and calibration of a square profile CALIBRATION TANK/ YES Manufacturer/ Top Industri China Model/lo Top Industri China 6000 Year/ 2007 Serial no./ No.1111 Pipe range diameter/ square profile No Vacuum pump/ 4kw Length/ 6000 COOLING TANK/ YES Number/ 1 Manufacturer/ Top ...

4 sock machines (socks) for sports, a low investment for large production, there are 4 machines for sports socks. Articles; winter terry, sport sneakers, without summer terry, sockets w/ terry without terry half-half, all types of sports socks with design, conti matec brand machines, 2 machines. conti F3c 4 120 needles and 2 machines. conti Fv 4 108 needles, machines in excellent condition fully working,. Quoted price for w/mach be the first, take advantage of this great opportunity.

This BBA PT150 with strong 7.5 kW electric motor can be used well on large construction projects, where the power supply is often well regulated. Then this PT150 with electric motor is a good choice., Environmentally friendly, not much maintenance, so an investment that pays for itself quickly., This PT150 is electrically powered and built into a robust galvanized stacking frame., , Max. capacity :90 (m3/hour), Max. head :20 (mwc), Max. suction height : 9.6 (meter), , Throughput capacity: 90 m3/h, Max. head: 20 MWK, Max dirt passag: 1485 rpm, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.500 kg, Connector size: 4, Cargo space capacity: 1.500 l, Technical condition: good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, ,  ...

This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2017, Applicable material: Water, Empty weight: 1.150 kg, Connector size: 4, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer a ...

This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.000 kg, Connector size: 4, Technical condition: good, Visual appearance: good, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses  ...

EZ: 08/1994, diesel, with three-way tipper, sand & salt spreader, hyd. pivoting snow plow, with German approval, 3.82 m long,

sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1880 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92600 € : 1861.26 € : 160 to : 6 mm : 750 mm : 1100 mm : 230 mm : 1 - 172 mm : 45 1/min : 6 : 100 mm : 80 mm : 375 mm : 540 mm : 11 kW : 1890 mm : 1950 mm : 3650 mm : 15500 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety dev ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 58200 € : 1169.82 € : 80 to : 4 mm : 600 mm : 900 mm : 200 mm : 1 - 110 mm : 60 1/min : 6 : 80 mm : 50 mm : 300 mm : 400 mm : 7.5 kW : 1600 mm : 1500 mm : 2750 mm : 5700 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device ...

: neu : 2024 : 7296 : prompt, Zwischenverkauf v : Türkei : 70300 € : 1413.03 € : 1 : 100 to : 4.5 mm : 700 mm : 1000 mm : 210 mm : 1 - 132 mm : 58 1/min : 6 : 90 mm : 60 mm : 300 mm : 445 mm : 7.5 kW : 1650 mm : 1545 mm : 3011 mm : 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00 ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83200 € : 1672.32 € : 130 to : 4.5 mm : 650 mm : 950 mm : 220 mm : 1 - 132 mm : 50 1/min : 6 : 95 mm : 70 mm : 325 mm : 500 mm : 11 kW : 1800 mm : 1725 mm : 3020 mm : 8000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety devi ...

Suitable for measuring and presetting all types of cutting tools as well as for measuring grinding wheel packages. The Zoller image processing saturn set incl. Camera system allows a fast and operator-independent measurement of any tool cutting edge. Accessories: ZOLLER measuring machine control »Pilot 4.0« Panel PC with 24 multi-touch display., Industrial computer with Windows 10 64-bit operating system., SK 50 high-precision spindle, concentricity 0.002 mm, spindle brake, 4 x 90 ° spindle indexing,, Autofocus CNC drive in the C-axis for operator-independent cutting edge focusing and automatic, Measurement of multi-edged tools, Rotary encoder for high-precision position determination in the C-axis, Software pilot 4,, Monitor holder for ZOLLER measuring machine control, mouse and keyboard shelf., Under table system,, Maintenance unit,, Thermal label printer., Z-axis travel: 420 mm, Tr ...

Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well as roof and wall diagonals made of round steel (diameter 16 mm). ROOF: Hösch Isorock Integral D 115 MW roof panels, component width 1000 mm, sheet thickness 0.50 mm inside and outside (core thickn ...

As good as new three-jaw chuck FORKARDT F+250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners Three-jaw chuck incl. flange ♦ 4 x Fastening bolts, spindle mounting flange - bayonet lock ♦ Tension wrench available. Pictures: Three-jaw chuck No. 1628855 ♦ incl: flange mount DIN 55027 - J8 ø 139 mm. ♦ Without base jaws and top jaws: (option 170,00€) ♦ Without feed key not included: (option if available) Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

Offer consists of: Horizon AC-8000 S Gathering tower with 8 stations -Sniffer - Double, miss-blade and jam control - Integrated vibrator with autom. Lowering - Format: max: 318x470mm, min: 148x210mm - Paper weight: 23-210g/sqm - Loading capacity 10cm/station - Capacity: up to 2400 sets/h - Machine dimensions: 165x65x207cm - Weight: 510kg - Electricity: Three-phase 400 volts On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

SAMCO Unilev N15 Edge Grinder Two-speed sanding belt Pneumatic oscillation Adjustable table at an angle of 0-45 Sanding belt height 150mm Snap for curvilinear elements Sanding belt 2160x150mm Extraction nozzle 120mm Motor power: 3kw

Shut-off valve , Quick closing valve, Manual valve METAL WORK V3V 300 pressure: max. 15 bar flow: min. 1.1.300 l/min / max: 14,000 l/min temperature: -10 °C - 50 °C thread: 1/2 ( inch, female thread ) installation length: 110 mm Snap fastener, lockable ( with padlock ) New ! Dimensions: 110 x 72 x 132 mm

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

Used Simonazzi Europa Isobaric Monoblock 48 8 8 Suitable for the production of beer sparkling wine soft drinks both carbonated and non carbonated and mineral water in glass containers with a height of 130mm to 350 mm The monobloc is composed of a filling carousel of 48 Simonazzi Eurostar model taps with completely new pre evacuation vacuum self levelling and relative snift the bell rods are electropolished for perfect sliding and a very long life Flling system of Used Simonazzi Europa Isobaric Monoblock The sniff is equipped with a double seal to use the taps for both carbonated and non carbonated There is a vacuum pump with a water cooled ring The filling bell is tested for 7 Bar of pressure and is internally mirror electropolished with an internal inclination for maximum sanitization The 48 pistons are completely new in stainless steel and also the sliding bars and bearings are new and ...

Used Filling Monoblock Fimer 1999 Builder FIMER COSTRUZIONI MACHINE ENOLOGICHE SNC Model SRT 991 CORK DEAIRATION Year 1999 Speed b h 1500 x bord 0 75 lt Processed formats 0 375 0 750 1 50 lt Rotation direction Clockwise Accident prevention protections Yes Manuals available Yes Revisions available No Operating state Disassembled Bottled product wine Used container glass bottles Rinsing machine N of pliers 9 Filling machine Number of Valves 9 Type of nozzle Fixed Isobaric valve No Capper Type of stopper satin cork Number of heads 1 Cap size diam 24 x 39 PLC type Spare parts available No Hours worked 1500 00 Used Filling Monoblock Fimer year 1999 this machine is in excellent conditions and ready immediately for sale [...for more information send your inquiry to the seller.] refno: M210

Used Capsuling Machine Nortan Prisma 2019 The Nortan Prisma 40 capper of 2019 is a cutting edge machine designed to guarantee high performance and reliability With a voltage of 400 volts and an absorption of 2 kW a frequency of 50 hertz and a mass of 1400 kg this capper is perfect for working with an air pressure of 6 bar The machine is anti clockwise and has a maximum speed of 2000 pieces per hour on both types of capsules shrink and snare polylaminate The operator panel positioned on the upper left part is analog and includes a small PLC The control key and the start and stop are manual This Nortan Prisma 40 capper is like new and immediately available in stock after a short pre maintenance to check that everything is perfect If you are looking for a reliable and performing capper this Nortan Prisma 40 from 2019 is the right choice for you [...for more information send your inquiry to  ...

Used Water Complete Bottling Line Flat Drinks 300 bph 18 9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing filling and capping system It is the perfect solution for medium sized HOD water bottling operations Designed for adaptability these machines can be configured to handle both 3 Gallon and 5 Gallon bottles This complete system effectively handles 300 600 BPH Manufacturer CAP SNAP Portola USA Year of production 2005 completely refurbished in 2015 and since then it has worked only 500 hours Capacity 300 bph Required energy sources air 6 bar power 40 kW cleaning water supply 2 bar and filling water supply Line composition Semi automatic cap removal device This device is used to remove caps from bottles Entrance conveyor On this conveyor belt the bottles are manually placed Prewash with cold water through nozzles This is the first stage of washing using cold wat ...

Roland 306+LVT SNo.26994 B Year:1997 Max Size 59 x74 6 col+ lak with raster roller RCI consol Autoplate Rolandmatic Tehnotrans Grafix puder All new rollers Available: immediately Condition: very good

Used Capsuling Machine Robino and Galandrino 1996 Robino Galandrino Suitable for the distribution of PVC and poly laminate capsules 2 thermal heads and 2 snare heads Capsule magazine with tray Robino Galandrino have the base completely enclosed in stainless steel Bottles entry from the left Year 1996 CE Production of about 4 000 in PVC and about 2 500 in POLYLAMINATE [...for more information send your inquiry to the seller.] refno: CA64

3 silos, pneumatically fillable, each with a capacity of 69m³, incl. discharge screws. A discharge screw was completely renewed in 2021, which is stored in a hall. The other snails are functional without knowledge of defects, but can be dismantled for inspection. The price is for the complete facility. However, the silos can also be requested individually. Sale of the system may also be in parts. Dismantling / transport by the buyer. On request, support can also be provided with dismantling and loading.

General SKU095T577 LocationBarneveld MakeZondervan Sneek No.S-2109-01 Year of construction1989 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket1 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor1.5 KW Specified Features - Tumbler mixer Tumbler mixer(1x) Capacity100 Ltr Diameter660mm Cylindrical length420mm Inletdia. 270mm Outletdia. 50mm With jacketcheck Max. temperature200 Degr. C. With motor1,5 KW, 220/380 Volt Speed mixer± 27 Rpm MaterialStainless steel 1.4401 (316) Information With switchcheck Floorspace1,5x0,8 M Total height1,4 M Weight430 KG Extra SpecificationsThe double jacket on this machine can only be used for cooling or heating, before or after the  :turning process. Not during! The same applies to the vacuum Tumbler mixersZondervanMixers > Tumbler mixersBrand > Zondervan What you can expect from Foeth: ...

General SKU345S667 LocationBarneveld MakeENCO Energie Componenten GmbH (AT) No.3385 Year of construction1990 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor3.6 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6300 Ltr (8100 Ltr ) Vessel sizesdia.2000 x 2108 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionsDN100, DN80 (4x), DN50 (2x), DN25 (2x) OutletDN80 (2x), DN25 With jacket(250 Ltr) Max. temperature200 °C With paddle stirrersigma SNR 25-06 Motor3,6 KW, 220/380 Volt Speed mixing shaft7,1-43rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,3x2 m Total height4 m Weight2400 kg Extra Specificationsbio reactor Minerals & inorganicAPIPlastic & polymersBiopharmaceuticalDyes & pigme ...

Used new three-jaw chuck RÖHM DURO T250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners ♦ cylindrical receptacle for spindle flange Pictures: Three-jaw chuck No. 437478-1526 ♦ with as good as new base jaws and new top jaws: ♦ with feed key included: Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.

sheet width: 1500 mm plate thickness: 1,25 mm pre-bending: - total power requirement: 0,75 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 2 x 0,6 x 1 m Electric 380 Volt: Foot switch: Special round bending machine for air duct construction for rounding profiled sheets with folds such as corner folds, snap folds and standing folds (max height 13 mm). It is possible to round the inner and outer casings of the duct bends and air baffles that are folded on both sides. The previously required filling sheets for the different types of folds are no longer necessary. Its all three reels driven by a geared motor with re- and li-running using a foot switch. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Generator -Monobloc design; 2.2kW Compact digital generator; Housing heat capacity: 1040,000Hu; Housing heat capacity: 1,040,000HU X-ray Tube - Stationary anode, dual focal spots 0.6 and 1.4mm; Tube assembly total filtration ³ 3.0mm Al; Anode heat capacity: 76,000HU; Anode cooling rate: 37,000Hu/min Collimator - Iris collimation; Dual opposing parallel semi-transparent shutters (180° rotation) Image Intensifier - Tri-mode 23/15/11cm (9/6/4.5); Grid: 8:1 ratio 40 l/cm (102 l/in.) TV Camera - High resolution CCD-Camera; Matrix: 752 x 582; Bandwidth: 20MHz; Video signal: CCIR /50Hz, 625 lines Fluoroscopy - Focal spot: 0.6mm; kVp range: 40-110; mA range: 0.1-4.0 0.2-8mA (snapshot); Fluoro modes: - Continuous, - Snapshot, - Pulsed (2p/3s); ABC: Automatic Brightness Control; Dose area product (optional); Skin spacer 30cm (optional) Radiography - Focal spot: 1.4mm; kVp ra ...

BBA BA200K D300 , , - Machine is unused, -Equipped with floats for automatic switching, - Suction : DN250, -Press : DN300, , MAX capacity : 640m3/h, MAX head : 32 MWC, MAX free passage : 105mm, , for and by: sewage, dredging and shipping, rental companies, seawater, chemical industry, calamities and civil engineering., , Throughput capacity: 640 m3/h, Max dirt passage: 105 mm, Motor brand: Deutz, Max. head: 33 MWK, Max dirt passag: 1800 rpm, Weight: 2650 kg, , = More information =, , Year of manufacture: 2018, Applicable material: Water, Empty weight: 2.500 kg, Height: 140 cm, Cargo space capacity: 10.668 l, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to  ...

Description: Machine number: 211355 Operating voltage: 400V Frequency: 50Hz Control voltage: 230 V Rated current: 80 A Total rated current: 118 A Total connection: 62 kW Closing force: max. 1100 kN Closing force: max. 50 kN Opening force: max. 34/255 kN Opening distance: max. 500 mm Tool installation height: at least 250 mm Distance between the clamping plates: max. 750 mm Light column spacing: 470 x 470 mm Tool platens: 637 x 637 mm Weight of movable tool halves: max. 760 kg Ejector force: max. 40 kN Ejector path: max. 175 mm Screw diameter: 30 mm Effective auger length: 20 Snail travel: max. 120 mm Calculated displacement volume: max. 85 cm³ Shot weight: max. 77 g PS Material throughput: max. 13.5 kg/h PS Spray pressure: max. 2000 bar Injection flow: max. 236 cm³/s Screw torque: max. 250 Nm Nozzle contact force: max. 50 kN Nozzle lifting path: max. 210 mm ...

Injection Weight: 434g Closing force: 2,000 kN Screw diameter: 55 mm Injection pressure: 1650 bar Column spacing: 520x520 mm Board size: 728x728 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 80000h Weight: 7300 kg Dimensions: 6x2 m Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, ticketing snail

For sale Duplo DC-10 mini stacker + Duplo DBM 100 folded sewing machine used and working. • The 10-station finisher is complete with carriage, pick-up rollers and transport belts in good condition, has no collection tray and works in series with the creaser. • The pin and fold sewing machine in manual mode or coupled to the finisher, is equipped with 2 semi-new heads (snail type cartridges) up to the size 32x45. It has 3 + 3 memories (A4, A3 and custom size), pin in the center or on the head, you can adjust the folding pressure. Machine completely overhauled and ready for immediate shipment. I can send video of the machine in operation.

Electric well dewatering pump zd 300, Compared to its big brothers, this ZD 300 has the advantage of its light weight and compactness. The high efficiency of the ZD 300 ensures enormous capacity., The sturdy, fully galvanized frame is stackable, making the ZD 300 Elektro wellpoint pump easily and safely stackable, up to 3 pumps high on a stable surface, up to 2 pumps high on a truck., A large sturdy lifting eye - centrally integrated - for easy lifting with a crane. It is also equipped with large integrated forklift socks, which make the pump easy to transport., This pump is configured as a 220 V machine., , MAX. CAPACITY 35 m³/h, MAX. HEIGHT 20 mWK, MAX. SUCTION HEIGHT 9.6 mWK, WEIGHT 480 kg, , Throughput capacity: 35 m3/h, Max. head: 20 MWK, Weight: 480 kg, , = More information =, , Year of manufacture: 2024, Empty weight: 480 kg, Connector size: 4 Cardan, Cargo space capacity: 582 l, ...

Used Capsuling Machine Nortan UNICAP 35 The unicap aurora model guarantees maximum production for any type of capsule applied as in addition to the single cap distribution a 3 4 head turret is installed which is able to obtain the best smoothing quality without decreasing the production speed of the machine The monoblock is therefore composed of Single cap vending machine suitable for shrink capsules polylaminate in tin and aluminum and sparkling wine for productions from a minimum of 900 B H to a maximum of 3 500 B H Very simple in mechanical construction and in its maintenance being all its mechanical parts in motion mounted on sealed bearings 3 or 4 heads turret in the snare only sparkling only solution or in the snare sparkling wine combination Frame completely covered in stainless steel gearmotor with inverter electrical panel and safety guards in stainless steel all protected and e ...

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wartsila in end of year 2010 and it was commissioned in 2011 as a turn-key project with heat recovery system for 10 bar steam production. Fuel used in this plant was normal natural gas fed from a local pipeline. The plant was operated till 2021 having total operating hours 43’767 till shutting down. Complete plant with step up transformer, lube oil system, control panels, and synchronizer panel, USP systems, operating monitors, MCC, start system and air compressors, HRCS for 10 bar steam, exhaust system, 6 kV Vacuum breaker with synchronisation, manuals and drawings. Plant is still installed, and electric power is still connected to all devices. Wartsila Service has made all scheduled services for this engine, last 40’000-hour service just 3000-hour prior operation closing in 2021.  ...