smoke house used for sale

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption: 2950 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special e ...

Combustion chamber power: 49kW; Working power: 45kW; Particulate filter: Yes; Flue diameter: 180mm; Warm air delivery pipes: 2 x 200mm; Firebox length: 660mm; Firebox width: 480mm; Firebox height: 600mm; Air flow : 3500m³/h; Supply air filter: Yes, large-area supply air filter with no loss of performance; Power consumption: 550W; designed for room volume: 1000m³; Weight: 310 kg; Hot air furnace with a combustion chamber made of stainless thermal chrome steel, with reinforcing fins and flue exchanger. Centrifugal fans for the transport of hot air on special elastic suspensions, operating at low speed. Smoke fan, electrical switchboard and control panel with thermostat, 2 exhaust elbows.

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...

- Strokes x 1100 - y 500 - z 500; - Automatically rotating head with an HSC63 electrospindle (fourth axis); - Automatic fifth axis on the tablet positioned on the vertical table, with the possibility of raising the tablet on the z axis by approximately 300 mm; - Chain tool changer with 45 positions; - Chain pallet changer with 9 positions; - Chip conveyor and chip conveyor belt; - Paper filter for cooling water; - Selca 40 45 control; - Smoke reduction filter; - Processes carried out by the machine over the years: only aluminum (the machinery was built for the processing of iron, but when working only with aluminium, it is less worn); - Year 2001

Code: 0239 Brand: SCM Model: D/80 Automatic double end tenoner with 10-groups (5+5) for furniture, doors, window frames, panels, prefabricated panels, tables, cladding, prefabricated houses, fibre cement, plexiglass and various Technical data: Working length mm 3200 Min working length on 1 track mm 75 Min working length on 2 tracks mm 150 Working height mm 180 Adjustable feed speed from 5 to 30 mt/min Heavy cast-iron structure Rubber-coated tracks Track lubrication unit Composition: Automatic scoring unit - Motor Hp 1,5 Hogging unit - Motor Hp 8/12 Automatic Spindle moulder unit - Motor Hp 6,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 5,5 - Rpm 3000/6000 - Shaft diameter mm 40 Spindle moulder unit - Motor Hp 7,5/9 - Rpm 3000/6000 - Shaft diameter mm 40 Overall dimensions for transport: Machine mm 4800 x 2400 x 1700 h + Shoulders (tr ...

Perfect binder Heidelberg Eurobind 600, machine number FMDDA0 000027, year of manufacture 2007, 1 clamp, hot melt, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Code: 0242 Brand: GABBIANI Model: MODUL/80 Automatic double end tenoner for furniture, doors, kitchens, cabinets, window frames, panels, prefabricated houses, raised floors, composite materials, and various Max working width mm 3200 Min working width mm 150 Max working height mm 180 Operating units: 1° Upper blade unit - Motor Hp 3,2 - Rpm 2900 - Suction mouth diameter mm 120 2° Lower blade unit - Motor Hp 4,5 - Rpm 2850/5700 - Suction mouth diameter mm 120 3° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 4° Automatic spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 5° Spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 6° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 Feed speed variator Automatic shoulder opening with dis ...

Staplers Hohner Economy 25/40 - 15/25 - 25 in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Used Elopak Forming and Filling Line for Liquid Soap up to 4200 Cartons h The Used forming and filling line Elopak for liquide soap up to 4200 cartons h stands as a testament to reliability and performance for discerning industry professionals Operational Status and Technical Features Currently housed in storage this line accommodates bottle formats ranging from 0 25 L to 1 0 L offering essential versatility in packaging solutions Furthermore its fill type based on weight ensures accuracy throughout the filling process Details on the Filling Machine The Elopack liquid Soap line boasts a standard A Style configuration manufactured in 1995 with a subsequent capper upgrade in 2007 Despite lacking a CE certificate meticulous testing and thorough cleaning have rendered it in optimal working condition Performance and Key Features of the Elopack liquid Soap line Capable of processing up to 4 20 ...

Stapler Hohner Exact, machine number 92.007.316, 4 Hohner stitching heads 52/8, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Stapler Hohner Accord 15/25, machine number 88.115.759, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK  ...

Smoking cabin ASECOS GmbH smoke & talk® ECONOMY LINE 4P Model: ST.203-E-MI. Number of persons: 4 Nominal voltage: 230 V 50 / 60 Hz Power consumption: 0.24 kW Visitor's room: Width: 1280 mm, Depth: 1330 mm, Height: 2150 mm used, tested ! dimensions ( exterior, W x D x H ): 2050 x 1360 x 2240 mm dimensions ( transport, W x D x H ): 2150 x 1460 x 2390 mm

Two genset Cummins QSK60G6,, LOW TIME WORK 400 hours 2500kva 1700 rpm 60hz, panel control , exhaust system for power house, include transfer panel

material thickness: - mm material width: 730 mm table-size: 2800 x 730 mm turning speeds: max 12000 U/min speeds: 1000 - 13500 U/min range L-W-H: 3 x 0,85 x 0,57 m weight of the machine ca.: 140 kg Electric 380 Volt: Machinefeets: höhenverstellbar In-house construction of a universal grinding station consisting of a flexible shaft from Suhner with various attachments, a separate belt sanding unit for sanding edges with the same sanding direction (lying and standing - see photos 4+5) and the large sanding table made of aluminum profiles. This table is equipped with a manually movable and height-adjustable side stand that runs in a guide over the entire length. There is a horizontal support bar attached to it, to which the sanding brush is attached and which can be moved manually from front to back. The recording bar can also be tilted if necessary. With this system, larger areas with th ...

sheet thickness - max.: 1,5 mm Roller stands: 7 Profile height max.: - mm speed: 15 m/min total power requirement: 2,2 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1,5 x 0,6 x 1,15 m Electric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set. Selling due to owners illness and retirement. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet thickness - max.: 1,5 mm Roller stands: 7 Profile height max.: - mm speed: 15 m/min total power requirement: 2,2 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1,5 x 0,6 x 1,15 m Electric 380 Volt: Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. The set of rollers is probably standing seam, but on the other hand we cannot describe the profile rollers. The buyer must obtain the appropriate roller set. Selling due to owners illness and retirement. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005). Seismic zone: 3 (DIN 4149-4 April 2005). STRUCTURE: The primary structure consists of hot-rolled and hot-dip galvanized IPE solid profiles. Main f ...

Filling machine in packages from 200 ml to 6000 ml. Equipped with 8 nozzles. Possibility of pouring foaming products, pouring from the bottom of the package. It is ideal for household chemicals, professional chemicals, cosmetics, fertilizers and many other products. Demo machine. The diameter of the fillers is 16 mm. Siemens Controller I have a test video for the machine.

Description: Technical details: Volt 220 V, connected load 0.95 kW, additional information: ELBARON - ISI Industrieprodukte GmbH, type: EBR 2500 D EBR 2500 D, for extracting oil mist, emulsion mist (for emulsions with higher oil contents) and smoke. The ELBARON filter series was developed for use in machining with pure oil or for separating oil mist and smoke. The ionizer/collector cells, which we specially manufactured with high precision, in combination with the coordinated, very powerful high-voltage transformer and many other well thought-out details result in one of the most powerful electrostatic filter systems on the market. The ELBARON electrostatic filter system is an electrostatic filter system that has been tried and tested for years and is used 10,000 times worldwide. weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,300 mm

Featured Listing: INVPACK MVA12 - High-Speed Packaging Machine Unlock unparalleled efficiency and precision with the INVPACK MVA12, a standout model from INVPACKs lineup, crafted with meticulous attention to detail in 2019. This machine not only represents the pinnacle of packaging technology but also boasts an exceptional condition that rivals new models, making it a valuable addition to any high-volume production environment. Key Highlights: Pristine Condition: Despite its prior use, the INVPACK MVA12 is in remarkable, like-new condition. It has been meticulously maintained and has logged only 390 hours of operation, demonstrating minimal wear and a long service life ahead. Exceptional Productivity: Designed for operations that demand both speed and reliability, this machine delivers an impressive output of 15 doses per second. It is engineered to keep up with the rigorous pa ...

Tarrington House mobile grill, type: K114BC13, grill dimensions: 720 mm x 400 mm, total dimensions: 1360 mm x 560 mm 1160 mm.

the system was used to wrap styrofoam boxes with smoked fish in foil using the angle welder,, max. number of machine cycles when idling: 20 cycles/min,, The two machines can also be purchased individually., wrapping machine:, The machine works in a stable vertical position thanks to its 4 columns and with a very even pressure on the shrink film. Excellent sealing effect with minimal wrinkling. Height and pressure of the welding frame are adjustable. Easily adjustable perforation module., Pack sizes:, Length: unlimited,, Length x height: up to max. 800 mm,, Cross sealing L/H (mm): 800/350, Dimensions wrapping machine: L x W x H: 3,420 x 1,965 x 1,400 mm., Energy consumption: 2.5 kW, Net weight: 800 kg, Shrink tunnel:, double air circulation,, adjustable airflow,, suitable for large products and/or high speed packaging., Max. product dimensions: L: 1,300 x W 600 x H 300 mm,, Tunnel size: L ...

inlie GEA DIESSEL syrup house DICON Dimix linear mixer Capacity 32000 l/h Total dimensions length x width x height: 1800 mm x 1300 mm x 2300 mm No mixing tanks. The DICON™ linear system mixes liquid ingredients in the selected mixing ratio (in the pipe); and, because less equipment is required, space requirements are reduced, maintenance and cleaning (e.g. cleaning in place) Description: The economical mPDS 1000 analysis unit continuously determines the density and concentration of liquids and gases. Since the assessment body has written several application programs, the following process applications can be included in the standard: measurement of extract, alcohol and original wort in beer, measurement of alcohol in distilleries, Brix measurement, true and relative density and API number of petroleum products and measurement of gas density. Special requests can also be fulfi ...

Description: KAESER ASK 34 SFC with Inverter Drive and Heat Recovery Option  , rated power: 18.5 kW air flow: 3600 l/m working hours: approx. 15948 hrs., 12845 hrs. under load max. working pressure: ,8 bar regulary maintained equipped with 1 RFID user card! service manual: unavailable  , integrated SFC control cabinet housed in its own integrated yet insulated control cabinet the SFC frequency converter is shielded from heat arising from the compressor a separate fan keeps operating tem peratures in the optimum range, so as to ensure maximum performance and service life SIGMA CONTROL 2 traffic light” LED indicators show operating status at a glance, plain text display, 30 selectable languages, soft-touch keys with icons, fully automatic monitoring and control selection of Dual, Quadro, Vario and Continuous control as standard ethernet interface for connec ...

Approx. Onsite Dimension. (l x w x h): 270 x 300 x 100 mm, weight approx.: 5 kg

ZUKOS alarm system, consisting of RSI WIP210 control panel with indoor siren, 1x ZUKOS outdoor siren, 1x LCD control panel, 3x motion detector with camera inside, 1x handheld transmitter, 1x day, 1x Zukos butler, 1x smoke detector

Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventil ...

ZUKOS alarm system, consisting of RSI WIP210 control panel with indoor siren, 1x ZUKOS outdoor siren, 1x LCD control panel, 4x motion detector with camera inside, 3x motion detector with camera outside, 4x handheld transmitter, 3x smoke detector

Ref.Nr. 00809 Description of the system 3D FIBER laser cutting machine Manufacturer: BLM ADIGE Model LT Free Year of construction 2017 Number of axes of laser head 5 axes Laser power 2000 watts Operating hours (15.04.2024) 869 h With radiator With extraction system Sideros - Footprint: without suction And Radiator Length: 5.50M Width:3.70M Height:4M (Radiator and extractor: side by side, length 3m, width 1.70m, height 2.70m) Floor space: approx. 24sqm Customer has only cut stainless steel 4mm so far. (According to the manufacturer, you can cut up to 6mm thicknesses. Until now, the machine has been used for machining stainless steel housings Without software - (customer uses in-house software) Supply voltage 400V +-10% Power consumption 16 kVA Technical condition: The laser is in very good technical condition Maintenance was carried o ...

KOMO GRAIN MILL FIDIBUS CLASSICThe classic with a revolutionary grinder design that ensures the smooth interaction of forces and a pleasant smooth operation. Solid, local beech wood with classic wood mortise on the outside and self-sharpening millstones made of corundum ceramic and powerful 360 watt industrial motor on the inside.360 watts, grinds 100 grams of wheat per minuteSuitable for soft and hard grains as well as spices, legumes and coffeePerfect for a household size of 3-5 peopleGrinder: Corundum/ceramic infinitely adjustableYou get a manufacturer's warranty from the date of purchase and an invoice with VAT. Pay in cash

Small but mighty! The FIDIBUS 21 flour mill measures just 32 cm in height and can easily compete with the very large flour mills in terms of performance. Perfect for a 1-2 person household.250 Watt motor powerSuitable for soft grains (such as wheat, spelt, rye, einkorn, etc.) and spicesGrinds 100 grams of wheat per minute, several times the amount on a coarser settingHopper capacity: 850 g (wheat)Grinder: Corundum/ceramic infinitely adjustableYou get a manufacturer's warranty from the date of purchase and an invoice with VAT.You can pick up on site and pay cash

Key data: 63 mm

We offer you a PURE LOOP extruder for sale that has been completely remanufactured in-house. This machine was put into operation for the first time in 2018 and was taken back by us from the former first owner in the course of an EREMA new machine purchase. The machine is designed for a throughput of up to 180kg per hour and is suitable for PE and PP. If you are interested in this machine, please do not hesitate to contact us!

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 Götzinger Power Drill drilling and milling center ------------------------------------------------- Machine is FACTORY TESTED by Götzinger before delivery. Depending on the type and version, you can use the Götzinger PowerDrill to: - Drill on the front and long sides - Doweling of house doors, timbers, brackets - The drilling patterns are freely programmable - You can: drill handle olives and corner bearings, with quick-change ones Multi-spindle drilling heads - You can: mill lock cases, handles and PZ as well as 3D hinges drill - The machine has a horizontal and a vertical milling unit - A simple control allows you to create drilling and milling programs, save and access again and again Stable base frame, covered with sheet metal Table ...

Key data: 80 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA RGA 80 TE, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 250-300kg per hour and is suitable for PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 50 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an INTAREMA® 605K, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 90kg per hour and is suitable for LDPE. If you are interested in this machine, please do not hesitate to contact us!

Description: Electrical Specifications: Output Current: 19.6 A Available for 20 seconds (peak): 40 A Network Frequency: 50 Hz +/- 0.1 Hz (output) Power Factor (cos phi): 0.98 Harmonic Distortion: <, 5% Input Voltage: DC: 50.4 V AC: 230 V Input Voltage Limits: DC: 44...64 V AC (Bypass/Charge Mode): 156...280 V Input Current at Rated Power: 96 A DC Input Frequency: Sell Mode: 59.4...60.4 Hz +/- 0.05 Hz Bypass/Charge Mode (Default): 55...65 Hz Bypass/Charge Mode (Allowable): 44...70 Hz Charging Current: 85 A Performance: Efficiency: 95.6% (Peak) Power Consumption in Search Mode: <, 7 W Environmental Specifications: IP Degree of Protection: IP20 Ambient Air Temperature for Operation: -25...70 °C Electromagnetic Compatibility: Immunity Standards (EN): 61000-6-1 Emission Standards (EN): Residential, Commercial, and Light-Industrial Environments: 610 ...

Max. size= 45 x 35 cm, Availability= 092023, perfect folding machine for in-house printers, copy and letter shops as well as for digital printers. PBA underfloor suction feeder with integrated alignment table 2 pockets Total counter, control panel, double sheet control, scoring, perforating and cutting devices formats: max. 35x45 cm min. 8.5 x 12 cm Fold length: max. 36 cm; minimum 5cm Paper weight: 40 - 250 g/m² Speed: 160m/min Power connection: 230 V / 10A LOT Loaded in truck or container

This is a tilting frying pan from the premium manufacturer MKN, type Optima 850 60 liters 3/1 GN with manual tilting. The device has undergone a major inspection in our in-house workshop and is fully functional. The tilting frying pan is completely unused and in top condition.The base version is without feet, but can be mounted on request. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Specifications: •W x D x H: approx. 1100 x 850 x 700 mm •Power supply: V: 400 / ...

Horizontal flow-wrapping machine Pearl Servo D6133 for packaging chocolates and chocolate bars Dataflex 6230; 32 mm (LH) incl. - TTO Ultra black - Print head cleaning kit - Rotary encoder kit - Counter pressure roller 750mm long - Shaft for counter pressure roller - Universal frame - Language Kit - Clarisoft Ergonomic design: HMI and start/stop buttons have been ergonomically situated to facilitate accessibility. High speed and versatility: Up-to 160 cycles/min. with 2UP and capable of wrapping endless diffrent products in the food and non-food sectors. No mechanical drives: Drive motors are connected directly to the various assemblies. The electrical panel is housed inside the machine frame and protected from the external environment. Compact design, easy cleaning: Thanks to the cantilevered construction and the use of polymer moulded components with graceful radiuses ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...

Professional packaging system from a renowned German manufacturer. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. -Automatic welding frame movement by manual release. -Roller holder and product tray adjustable. -Height adjustment of the conveyor belt via hand crank. -Tunnel opening approx. 550 x 300 mm. -Hot air flows in the tunnel mechanically adjustable. -Maximum package dimensions approximately: 550 mm x 300 mm. -Maximum film roll width approx. 600 mm. -Perforation of the foil possible via 2 adjustable needle rings. -Machine with castors movable and lockable. -400 V / 7 KW. Setting options on the display: -Tunnel temperature. -Welding time. -Transport time of the conveyor belt. -Transport speed of the roller chain. Dimensions set-up approximately: length 2.5 x width 1.1 x he ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Bastra smoking/cooking chamber for 1 trolley with friction smoke generator, type: 851C, number: 851C/0118, 400/230 V, 3 Ph, 50 Hz, 16 kW, volume: 1000 liter, inside dimensions: 1150 mm x 750 mm x 1350 mm, total dimensions: 1250 mm x 1100 mm x 2220 mm. Including 1 s/s smoke trolley 8 floors, dimensions each floor: 760 mm x 670 mm.