126,606 used machines on RESALE, but how to find them? Machine Search
Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45901-88
Gas-fired high-speed steam generator with feed water treatment and dosage module., Additional title: gas heated, Steam capacity: 120 kg/h, Perm. working pressure: 10 bar, Capacity: 96 Ltr, Set pressure gas burner: 20 mbar, Length: 1,6 m, Width: 0,95 m, Height: 2,2 m, Base construction: mounted on platform, Features: feed water treatment and dosage module
flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...
flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special el ...
flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...
flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
Caterpillar Gas Generator G3516A From 2001 Year of Manufacture these 2 x Caterpillar units are robust and high-performance power generation unit, designed for industrial and commercial applications. This model of generator is part of Caterpillar's well-regarded G3500 series and is engineered to provide reliable, efficient power in demanding environments. Key Specifications: Model: G3516A Year of Manufacture: 2001 Output: 1 MW Rated Speed: 1500 RPM Voltage Output: 400V Frequency: 50 Hz Fuel Type: Gas Engine Type: 6-cylinder, turbocharged, and aftercooled Cooling System: Liquid-cooled Performance and Efficiency: The G3516A is built to provide stable power output with minimal emissions. Its turbocharged and aftercooled engine ensures efficient operation even under high-load conditions. The generator operates at a steady 1500 RPM, ensuring smooth and cons ...
Key data: 3 KW, 3 kVA, 11000 V
2016 Jenbacher 616 Containerised CHP Unit – Natural Gas Generating Set 2.7 MW at 11kV UK Power Generators Ltd is offering is offering a Jenbacher 616 (J616) containerised Combined Heat and Power (CHP) generating set, manufactured in 2016, configured for natural gas operation and built to ISO 8528 standards. This is a complete containerised power and heat generation solution, ideal for industrial facilities, district heating, greenhouses, utilities, and energy centres seeking high-efficiency CHP performance. Technical Specifications of the available unit: Manufacturer: GE Jenbacher GmbH & Co. OG (Austria) Model: Jenbacher 616 Year of Manufacture: 2016 Fuel Type: Natural Gas Rated Electrical Output: 2.7 MW Rated Voltage: 11,000 V Frequency: 50 Hz Rated Power Factor: 1.0 Rated Current: 141 A Performance Class: G2 Max Ambient Temperature (Intake Air): 30°C ...
Speed 1500 1/min, output 380-415 V (3-phase) 50 Hz Auction-ID: A1-46045-138
Total height container 390 cm! Equipped with: 4000 liter fuel diesel tank (empty)( 3450x1250x2000 mm) Including: 20ft container. Auction-ID: A1-43429-70
40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12
30kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-14
Unaudited Good condition Auction-ID: A7-46327-195
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation
Key data: 2 KW
Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...
Steam generator PS400-60, electric heated stainless steel steam generator year of manufacture 2022, Factory inspection with the manufacturer 2026, 400 V / 60 kW / 50 Hz, 2-stage switchable (30 + 30 kW), max. operating pressure: 5 bar, adjustable operating pressure: 0 - 4 bar, max. steam amount: max. 84 kg/h (calculated value under optimal conditions), on a mobile frame, 1. Mechanical construction, The pot body is made of stainless steel 1.4571 and electrically welded. In, Kettle bodies are heating elements screwed in. The kettle body is located in a, Stainless steel housing and is clad with thermal insulation. In the stainless steel housing, the control cabinet is also located here. fittings (e.g.: steam outlet, water inlet,, etc.) lie outside the housing, 2. Functionality, Feedwater is pushed into the steam boiler by a water inlet valve. Is, when the intended water level is reached, the ...
maximum number of results exceeded
please refine your search
4.000 € 
