british flag
Resale Logo

smi used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used printing presses  CLR International Trading GmbH  http://www.clr-international.de 
banner logo
start page > keywords smi > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
124970755 706

SIDEL SIDEL Combi 8 FMm -/24/8C for sale
PET systems


PET blowing and filling line with SIDEL Combi filler 100ml - nominal output: 14,400 bph (100mL) - bottle size range: 100 ml - 1.0 Litr. (converting set for 0.5 and 1ltr. not included!) - bottle neck / Screw c ...
used machine
 
PET blowing and filling line with SIDEL Combi filler 100ml
- nominal output: 14,400 bph (100mL)
- bottle size range: 100 ml - 1.0 Litr.
(converting set for 0.5 and 1ltr. not included!)
- bottle neck / Screw cap: 30/25 mm low (Screw cap type common for still water and
soft drinks)
- ultra clean design, - min. log3 (dry preform decontamination by vaporised H2O2
novative Sidel PREDIS system) - CIP, SIP - COP, SOP filler sanitation / sterile
air overpressure
- SIDEL Combi 8 FMm-/ 24 / 8C PET blowing-filling-capping compact machine o HEUFT
Cap and level checker
- FUJI Intersleeve 3200-DE sleeve machine
- SMI MP 100 Multi Packer - cluster Pack 2 x 2, 2 x 3, 2 x 4 carton wrapped
- SMI LSK 15 shrink-wrapping machine
- bottle accumulation and conveyor system

Year of manufacturing and up is start 2006
Operating hours 29000 h

Out of operating since end of 2014.

Complete equipment, is still installed and available immediately.

Very good conditions.
2006
Price  
    request
124965130 1503

CLARK CGP 50S for sale
4 wheel forklift truck gas LPG


Clark CGP 50s 4 wheel forklift truck gas propellant type: 4 wheel forklift Manufacturer: Clark Drive type: Gas Type: CGP 50S Lifting height (mm) 4420 Stroke mast type double load capacity (kg) 5000 operating hours ...
used machine
 
Clark CGP 50s 4 wheel forklift truck gas propellant type: 4 wheel forklift
Manufacturer: Clark
Drive type: Gas
Type: CGP 50S

Lifting height (mm) 4420
Stroke mast type double load capacity (kg) 5000 operating hours (h) 3482
Tyres: L 2 x/2
Load emphasis: 600 mm
Transmission type: W
Weight: 6.895 t
Motorherst.GM
Engine type: 4.3 V 6
Engine power: 54 kW

The stacker is available from the 11.10.2017 available
1997
8,325 €  
    request
124929849 401

EKTAM, TURKEY One Way Glass, 0.2 - 0.5 ltr for sale
Glass Bottle FIlling Line EKTAM 7.000 bph


Glass Bottle Filling Line EKTAM 7000 bph Complete one way glass line for sprit and non carbonated drinks all machines made in year 2005 and operation stopped in 2008. Capacity 3500 liters / hour in 0.5 liter glass bot ...
used machine
 
Glass Bottle Filling Line EKTAM 7000 bph

Complete one way glass line for sprit and non carbonated drinks all machines made in year 2005 and operation stopped in 2008. Capacity 3500 liters / hour in 0.5 liter glass bottles made by Turkish EKTAM. This line has been filling grape vodka in 0.2 - 0.5 liter glass bottles and packed then either on tray shrink or carton boxes. All PLCs are type Siemens Simatic S7. Equipment is in very good condition

List of equipment
• Depalletizer Ektam Aspendos
• Empty bottle conveyor
• Ektam Mimoza filling block with
o 24 position rinser
o 30 valves volumetric filler
o 6 head capper (plug in PET cap)
o cap feeding system
• Filling level inspector type EKBI 10
• Labeling machine PE Master type 9T/540/2S-2E, roll feeding self adhesive
• Inkjet coder Domino A 200
• Bottle conveyor system for two secondary packaging machines
• Ektam Bergam Robot for carton boxing
• Box closing machine with conveyor
• Tray Shrink Packer SMI LSK 15
• Pallet wrapper Sarma Sik
2008
Price  
  FI   request
124965141 1800

SMICON PT 1500 for sale
Fumigation fumigation disinfection


Smicon PT 1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common ...
used machine
 
Smicon PT 1500 Fumigation / Fumigation System
In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm.



It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria.

Former list price 9.900EUR
2003
2,100 €  
    request
124929821 503

WEIMA WL-4 for sale
Single shaft shredders


WEIMA - rest wood Shredder intercom 4, feed opening 600 x 800/1050 mm, rotor diameter 252 mm rotor width 600 mm, rotor speed 60-100 rpm, power 18.5 kW - 400 v, Sieblochnung 22 mm (exchangeable), dust nozzle 160 mm, incl. ...
used machine
 
WEIMA - rest wood Shredder intercom 4, feed opening 600 x 800/1050 mm, rotor diameter 252 mm rotor width 600 mm, rotor speed 60-100 rpm, power 18.5 kW - 400 v, Sieblochnung 22 mm (exchangeable), dust nozzle 160 mm, incl. PLC control for optimum Crushing, strong drive with WEIMA-transmission - very good condition - made in Germany
2003
5,900 €  
    request
124965143 1800

SMICON AFT 2/1500 for sale


Smicon AFT 2/1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are com ...

 
Smicon AFT 2/1500 Fumigation / Fumigation System
In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm.



It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth), killing all the bacteria.



Former list price 10,900 EUR net

More articles - new and used - can be found in our shop!
International shipping costs on request!
 
2,300 €  
    request
124929799 406

SMI S.P.A., ITALY SK 300 T, 30 packs/min for sale
Tray Shrink Packer SMI SK 300 T, Never Installed


Tray Shrink Packer SMI SK 300 T, Never installed This tray - shrink wrapper was made by Italian SMI in 2006 and it has never been installed. It is an automatic machine for packing plastic, metal, cardboard and glass c ...
used machine
 
Tray Shrink Packer SMI SK 300 T, Never installed

This tray - shrink wrapper was made by Italian SMI in 2006 and it has never been installed. It is an automatic machine for packing plastic, metal, cardboard and glass containers. The machine packs containers on a carton pad, folds the pad into a tray and wraps a film around the pack and it is set up for glass bottles in format 6 x 4. This machine has never been used, stored properly indoors and is ready for immediate delivery.

Make: SMI S.p.A., Italy
Model: SK 300 T
Year: 2006
Serial no: PC06162/S8357
Capacity: 30 packs/min
Current format: 6 x 4
Electricity: 380 V, 50 Hz
Running hours: ZERO
Condition: Never used, good condition
2006
Price  
  FI   request
124965145 1800

SMICON FTA 1500U-6L for sale
Fumigation fumigation disinfection


Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are comm ...

 
Smicon FTA 1500U-6L fumigation / gassing system
In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm.

It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria.

Former list price 9,900 EUR

Item condition: used

More articles - new and used - can be found in our shop!
International shipping costs on request!
 
2,500 €  
    request
124929779 401

Ortmann&Herbst, Kettn 0.25, 0.33, 0.5 ltr cans for sale
Can Filling Line 30.000 cph for CSD


Can Filling Line 30.000 cph for CSD This complete can filling line was installed in 1994 and it was filling various carbonated soft drinks in 0.25, 0.33 and 0.5 ltr aluminium cans with type 202 and 211 lids. The l ...
used machine
 
Can Filling Line 30.000 cph for CSD

This complete can filling line was installed in 1994 and it was filling various carbonated soft drinks in 0.25, 0.33 and 0.5 ltr aluminium cans with type 202 and 211 lids. The line was in operation till 2015 and it was well maintaned and some equipment like seamer was refurbished completely. In the end of 2017 equipment was professionally dismantled and is now in a warehouse.

Main characteristics of this line

Manufacturers Ortmann & Herbst/CFT, Kettner, SMI, HEUFT
Year of manuf. 1994, 1995 and 2006
Capacity 30.000 cph at 330/250 ml and 19.000 cph at 500ml cans
Suitable for CSD and beer
Can lid type 211 and 202 (Diam 66 mm)
Filler Mechanical filling system
Consumer packs 4x6, 4x3, 2x3 shrink film
Pallet Max height 3.0 m, max width 1.42 m
PLC controls Siemens Simatic S5 and S7

Detailed list of equipment available for serious requests
1994
Price  
  FI   request
124964865 106

HIDRALMAC PH4C Platinum for sale
Hydraulic 4-column press 500 T


Here are the technical data of the machine offered: If the data does not fit exactly, please request by clicking an individual offer according to your wishes : ? Contact us for a custom quote? HIDRALMAC manufactur ...
used machine
 
Here are the technical data of the machine offered:
If the data does not fit exactly, please request by clicking an individual offer according to your wishes :

? Contact us for a custom quote?

HIDRALMAC manufactures presses exactly to your liking at surprisingly reasonable prices !

To have no problems with the procurement of spare parts , almost exclusively components MAde in Germany be incorporated into the HIDRALMAC presses.



General information:

Hydraulic 4-column press 500 T with nitrogen compression for 280 Bar
ATTENTION Extra picture
Columns and cylinder are made of tool steel SAE 1045 (identical to German standard C 45) and the outside induction hardened and chromed.
The linear guides of the plunger are made using bronze sliding sleeves.
Manuals and operating instructions for the motors, pumps and the actual press as well as the CE declaration (all in duplicate)
The machine complies with the EU Machinery Directive 2006/42 / EG.EN Hydraulic Presses
(4 Column Press Four Column Press, 4-column press, press columns, 4 column press, Column Press hydraulic four-column press, hydraulic 4-column press, hydraulic column press, hydraulic 4-column press, hydraulic column press
Hydraulic press, hydraulic press, hydraulic press,)

Specifications + Dimensions:

Capacity: 500 tonnes at 250 Bar
Retraction force of the plunger: 40 tons
Master cylinder: 2 pieces Ø 360 mm with induction hardening and chrome trim
Auxiliary cylinder: 2 pieces Ø 120 mm with induction hardening and chrome trim
Motors: Total 62 KW
Voltage / frequency: 400 V / 50 Hz
Voltage of 24 V .: Steuerungk
An axial piston pump: 290 liters / min. (Rexroth / Bosch A4VSO125)
Stroke length: 1000 mm
Installation height: 1500 mm (distance worktop - ram plate with the cylinder retracted)
Workspace: 2100 x 1500 mm
Table and ram plate: 2100 x 1500 mm with T-slots according to customer requirements
Total size tabletops: ca. mm 2750 x 1600
Total size follower plates: ca. mm 2750 x 1600
Working height: 850 mm (floor to top of table)
Speed: forward 300 mm / sec, return 300 mm / sec.. (at 20 T ram weight)
Speed printing phase: 200 to 28 mm / sec, 300 to 20 mm / sec, 500 to 6 mm / sec..
Overall Dimensions (D x W x H): 2900 x 2800 x 4040 mm
Total weight: about 39 to
Hardware Hydraulics:
Hydraulic block: REXROTH
Hydraulic Tank: 2000 Lt. volume
Oil consumption: 1000 Lt.
Ram protection: mechanically and hydraulically
Pressure Control: via PLC (minimum pressure 50 tons)
Water Cooling: for oil cooling - externally mounted (without cables)
Heating oil in the tank: to keep the minimum temperature of the oil at low outside temperature
Lubrication of guides: automatic, number of strokes and lubrication time on PLC adjustable
Additional hydraulics: 2 inputs and outputs for tool
Mechanical safety devices:
Side and rear double-wing doors protection - secured with magnetic limit switches
Protection terrace surrounding the hydraulic section with ladder
Ejector (with simultaneous flow and return of the 4-cylinder):
Capacity: 4 x 15 tons at 250 bar
Cylinder: 4 x Ø 90 x 70 mm - front + rear mounted on Presssenkoerper
Stroke length: 300 mm (adjustable via PLC)
Speed:. Advance 95 mm / sec, return 240 mm / sec.
Additional Bars: 2100 x 100 x 150 mm with T - slots - front and rear
Accessories Control:
Control system: SIEMENS S7 300 (suitable for subsequent full automation)
Memory capacity: 200 programs,
Pressure setting: via Monitor 50-500 to
Speed: adjustable via monitor 0-300 mm / sec. in automatic mode
Monitor: SIEMENS 12 \"touch panel
Electronic components: SIEMENS / MOELLER
Controller: on arm
Control: automatic 2-hand operation with key switch, manually via control panel in setup mode
Operation: two-hand operation to move
USB interface: for data transmission
Remote Control: Siemens for remote maintenance
Light Sensors: SICK 1500 mm at the front of the work area
Spacer sensors: the stroke length
Maintaining constant pressure: 0-900 sec.
Lighting: the entire press room by LED
Piece counter
Operation of the controller:
The linear measuring rod divided the control in each case with the position of the plunger and the ejector. The travel, the upper breakpoint and the changeover point at which the press of deadhead should switch to operating speed, as well as to driving end position can be easily and quickly entered via the monitor control.
The working speed can be set in 1 mm / sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm.
In addition, the machine features a pressure monitor which either when it reaches the desired pressure the plunger moves back up or the pressure within the preset time keeps constant (with 5% tolerance) and then opens.
The controller monitors the secured areas, the overall hydraulic, the pumps and the temperature.
In addition, it controls the synchronization between the master cylinder and regulates in unilateral burden after.
The controller is housed in a separate cabinet.
The actual press is operated via a fixed to a swing arm control panel. This reduces the paths.
Additional accessories:
Polycarbonate glass 8 mm indoors the back door
Polycarbonate glass 8 mm on the lateral doors of the work area and the work area
Liquid channel with 25 mm / radius on the front and back and side of the table
Special features of the press:
Including 10% reserve (capacity max. 550 tons)
Steel quality: stainless steel ASTM A36 LCG, manufactured according to DIN 8651
Motor and pump switch off when the tool is closed and control at 5% loss after (huge cost savings)
Nitrogen compression system:
Comes complete with a nitrogen compression system that produces an explosive pressure of 280 bar and switched on and can be switched off.


You are looking for a tailor-made machine?
? Contact us for a custom quote.
HIDRALMAC
Presses, press brakes and guillotine shears with the right degree
; ready for operation
2014
Price  
    request
124929775 404

SMI S.P.A., ITALY 100 packs/min for sale
Cardboard Sleeve Multipacker SMI MP 100


Cardboard Sleeve Multipacker SMI MP 100 The MP 100 Multipacker is a fully automatic machine to pack plastic, metal or glass containers in overwrapping cardboard sleeves. This machine has nominal capacity of 100 pac ...
used machine
 
Cardboard Sleeve Multipacker SMI MP 100

The MP 100 Multipacker is a fully automatic machine to pack plastic, metal or glass containers in overwrapping cardboard sleeves. This machine has nominal capacity of 100 packs per minute, but the final capacity depends on desired packing format. Low or medium capacity containers can be packed in OTT (Over The Top) or NT (Neck Through) way, this machine has been packing 0.5 liter glass bottle in 4-pack neck through format. This MP model feature an electronic grouping system; the change-over operation is manual.

The packaging process takes place in continuous motion. In the pack formation zone products are grouped in the desired pattern upon which a thin cardboard blank is placed. A mechanical device gets two edges of the blank bent downwards and joined by hot-melt gluing beneath the container batch. This MP 100 has about 15 meter one line bottle feeding conveyor and 10 meter ready pack out feeding conveyor included. This machine has damaged local control panel which will be replaced before / after shipping by the seller.

Technical data:
Manufacturer: SMI S.p.A Italy
Year of manufacture: 2008
Model: MP 100
Nominal capacity: 100 packs / minute
Serial no: PC08041 IS 1525
Electric connection: 15 kW / 400 V / 50 Hz
2008
Price  
  FI   request
124964682 102

TORNOS BECHLER TOP 100 for sale
CNC Langdrehen machine


used top condition from production 1 TORNOS BECHLER TOP100 CNC Langdrehen machine immediately from stock available for casting Scope of delivery: comprehensive documentation of operation 1 x tool presetter 1 x hyd ...
used machine
 
used top condition from production

1 TORNOS BECHLER TOP100 CNC Langdrehen machine immediately from stock available for casting

Scope of delivery:
comprehensive documentation of operation 1 x tool presetter 1 x hydro bar bar feeder
1 x chip conveyor
extensive tools + spare parts kit
also still a spare parts package with printed circuit boards can be purchased for an additional fee (see attached PDF)

Year of construction: 1990
Control: TBS-364
Spindle speed: 0-15,000 rpm
Bar passage: 10 mm
Turning length: approx. 180 mm
Transmission: 8,7 kW

front turret: 6 driven positions
maximum stroke X 1-axis: 50 mm
Max stroke Z1-axis: 100 mm

rear turret: 6 driven positions
maximum stroke X 2-axis: 80 mm
Max stroke Z2-axis: 180 mm

Changes / errors in the specifications and subject to prior sale!
1990
Price  
    request
124929750 401

PARMATEC for still and sparkling water for sale
Water Filling Line for PET Bottles 6.000 bph


Water Filling Line for PET Bottles 6.000 bph, 1.5 and 2.0 ltr PET bottle filling line for still and sparkling water. Suitable bottle sizes are 1.5 and 2.0 liter. The line was installed in 1997 and has been out of p ...
used machine
 
Water Filling Line for PET Bottles 6.000 bph, 1.5 and 2.0 ltr

PET bottle filling line for still and sparkling water. Suitable bottle sizes are 1.5 and 2.0 liter. The line was installed in 1997 and has been out of production till 2016. The line is still installed and can be powered for demonstration. This is otherwise complete line, but PET compressor, empty bottle inspector and bottle dryer are not included. Documentation of this line is available and the machines are in good condition.

List of equipment:

Preform feeding
Manufacturer: Contex 16I- Tanner
Type: VZT 2500 (SV)
Year: 2001
Includes: Feeder, tipper and local control

Blow molder
Manufactuer: Krupp Coproplast (SIG)
Type: Blomax 16, 17-041
Year: 1998
Capacity: 20 000 bph
Bottle formats: 1.5 and 2.0 liter, PCO 1881, cap thread 28 mm short
No of molds: 16
Control PLC: ABB

Filler
Manufacturer: Parmatec
Type: Isofill Block 40-50-10
Year: 1997
Capacity: 8.700 bph for 1.5 L
6.000 bph for 2.0 L
Filling valves: 50
Rinsing positions: 40
Capping heads: 10
Pitch: 110 mm
Container sizes: 0.5, 1.5 and 2.0 L
Container diameter: 45 – 104.5 mm
Container height: 150 – 350 mm
Capping machine: AROL Euro PK 10
Data coder: Domino DDC-3, 2003
Filling inspector: HEUFT Spectrum, 2003
Control PLC: Siemens S5

Carboblender
Manufacturer: Parmatec
Type: Acquamix 23000
Year: 1997
Capacity: 230 hl/h
Pressure: 7 bar
Sanitation station: Included

Labeling machine
Manufacturer: Krones AG
Type: Contiroll, K745-M88
Year: 2007
Stations: 1 station, with label correction system DRS 2292
Label type: Hot melt, OPP, wrap-around
Control PLC: Siemens S7

Shrink wrapper
Manufacturer: SMI
Type: APET 132/C
Year: 1997
Package type: 3x4 shrink wrap, no tray
Control PLC: SMI Cosmos
Handle applicator: SMI MAB 40

Palletizer
Manufacturer: Berchi
Type: Genius PTF
Year: 1997
Capacity: 15 – 20 pallets/h
Pallet type: 1200 x 800 mm Euro standard
Includes: Pallet magazine, layer dividing carton, pallet marking
Control PLC: Siemens S7

Stretch wrapper
Manufacturer: Robopack
Type: SPM/4
Year: 1997
Capacity: 20 pallets/h
Control PLC: Siemens S7

Air conveyors: 70 m approx
Bottle conveyor: 55 m, two accumulating tables
Pack conveyors: 42 m
Pallet conveyors: 23 m
1997
Price  
  FI   request
124964708 102

OKUMA LC20-2SC for sale
CNC lathe


used in production: 1 x Okuma LC20-2SC CNC lathe with OSP5000L G control Scope of delivery: 1 x Okuma LC20-2SC CNC lathe 1 x chip conveyor various tools (7 tools used with holder on TWS1) Equipment: Chip con ...
used machine
 
used in production:

1 x Okuma LC20-2SC CNC lathe with OSP5000L G control

Scope of delivery:
1 x Okuma LC20-2SC CNC lathe
1 x chip conveyor
various tools (7 tools used with holder on TWS1)

Equipment:
Chip conveyor
2 x TWS 8 tool slots
Hydr. Tailstock specifications:
Year of construction: 1985
Control: OSP5000L-G 3 - jaw chuck Ø 260 mm turning diameter over bed: approx. 400 mm
Turning length: approx. 700 mm speed: 3000 rpm
Transmission: 15/22 kW
2 x 8 x tool changer

Weight: VAT is about 7000 kg price free shipped from stock molding

Changes / errors in the specifications and subject to prior sale
1985
Price  
    request
124929710 706

HOLVRIEKA, LANDALUCE outdoor, vertical, cooled for sale
CCT Fermenting Tank 4 x 1920 hl


CCT Fermenting Tank 4 x 1920 HL Holvrieka / Landaluce Conical cone fermenting tanks (CCT) with gross capacity 1920 HL and net 1536 HL. All tanks are identical, two of them made by Hovrieka and two of them by Spanish L ...
used machine
 
CCT Fermenting Tank 4 x 1920 HL Holvrieka / Landaluce

Conical cone fermenting tanks (CCT) with gross capacity 1920 HL and net 1536 HL. All tanks are identical, two of them made by Hovrieka and two of them by Spanish Landaluia - all made in year 1998. Tanks are vertical outdoor type with 180 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have mechanical cooling control as well as product handling valve system and outside on tank skirt, there are two sample taking valves. The cones has been refurbished / modernized by changing sample taking valve and adding level sensor. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Holvrieka / Landalusia
Made in year 1998
Number of tanks 4 pcs
Type Outdoor vertical
Insulation PU 180 mm side and 230 mm in cone
Volume gross / net 1920 / 1536 HL
Design pressure Holvrieka 1.5 bar + statistical pressure
Design pressure Landalucia 1.0 bar + statistical pressure
Design vacuum 300 / 500 mm Water Column
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 5200 mm
Total height 11.7 m
Empty weight 17 000 kg with insulation
1998
Price  
  FI   request
124959792 702

W & P Doppelkonuskneter, W&P, max. 250 kg Mehl for sale
doublekonusmixer, fabr.W & P, type DK 250


cap. 250 kg flour, 1 speed\r\n1 timer

 
cap. 250 kg flour, 1 speed\r\n1 timer
 
Price  
    request
124929708 706

HOLVRIEKA, LANDALUCE outdoor, vertical, cooled for sale
Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce


Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce Conical cone bright beer / fermenting tanks with gross capacity 2500 HL and net 2380 HL. All tanks were supplied by Steinecker two of them made by Hovrieka in year 19 ...
used machine
 
Bright Beer Tank BBT 2500 HL Holvrieka / Landaluce

Conical cone bright beer / fermenting tanks with gross capacity 2500 HL and net 2380 HL. All tanks were supplied by Steinecker two of them made by Hovrieka in year 1998 and two of them by Spanish Landaluce in year 2000. Tanks are vertical outdoor type with 180 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have automatic (electro-pneumatic) valve system supplied by Steinecker. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Holvrieka / Landaluce
Made in year 1998 / 2000
Number of tanks 4 pcs
Type Outdoor vertical
Insulation PU 180 mm side and 230 mm in cone
Volume gross / net 2500 / 2380 HL
Design pressure Holvrieka 1.5 bar + statistical pressure
Design pressure Landalucia 1.0 bar + statistical pressure
Design vacuum 300 / 500 mm Water Column
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 5200 mm
Total height 14.5 m
Empty weight 19 000 kg with insulation
1988
Price  
  FI   request
124959876 702

W & P Doppelkonuskneter bis 190 kg Teig/125 kg for sale
doubleconusmixer, fabr. W&P, DK 100 N


cap. 100 kg flour, 1 speed, timer\r\ninclude 2 removeable bowls\r\n

 
cap. 100 kg flour, 1 speed, timer\r\ninclude 2 removeable bowls\r\n
 
Price  
    request
124929702 709

DIZIO CONSTRUCCIONI outdoor, vertical, cooled for sale
CCT Fermenting Tank 10 x 1200 hl Dizio


CCT Fermenting Tank 10 x 1200 HL DIZIO Conical cone fermenting tanks (CCT) with gross capacity 1200 HL and net 1016 HL. All tanks are identical, made by Italian DIZIO Costruccioni Meccaniche S.p.A - all made in year 1 ...
used machine
 
CCT Fermenting Tank 10 x 1200 HL DIZIO

Conical cone fermenting tanks (CCT) with gross capacity 1200 HL and net 1016 HL. All tanks are identical, made by Italian DIZIO Costruccioni Meccaniche S.p.A - all made in year 1987. Tanks are vertical outdoor type with 150 mm PU insulation, designed for seismic zone 2, supported from the bottom ring (no legs), with three (glycol) cooling zones, two on the side + cone. Tanks have mechanical cooling control as well as product handling valve system. Generally tanks are in good condition and they have a high hygienic level.

Technical Data
Made by Dizio
Made in year 1987
Number of tanks 10 pcs
Type Outdoor vertical
Insulation 150 mm PU
Volume gross / net 1200 / 1016 HL
Design pressure 1.5 bar + statistical pressure
Cooling media Glycol - water solution
Cooling zones 3 (including cone)
Tank inner diameter 4800 mm
Total height approx 10.5 m
1987
Price  
  FI   request
124942241 901

FENDT 712 Vario for sale
Tractors


; Power [PS]: 135; Transmission: Stufenloses Getriebe; Front tyre size: 480/65-28; Rear tyre size: 600/65-38; Rear tyres remaining: 50; Front tyres remaining: 40; Accessories: Stufenloses Getriebesystem, Motorhersteller: ...
used machine
 
; Power [PS]: 135; Transmission: Stufenloses Getriebe; Front tyre size: 480/65-28; Rear tyre size: 600/65-38; Rear tyres remaining: 50; Front tyres remaining: 40; Accessories: Stufenloses Getriebesystem, Motorhersteller:Deutz, Steuergerät - Doppelt wirkend (3x), Druckluftbremse, Elektronische Hubwerksregelung (EHR), Hydraulische Lenkung, Luftgefederter Sitz, Diesel; Top speed [km/h]: 50
2000
35,800 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More SMI models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter