sm used for sale

Sling and agitator Rego SM3 A used Rego SM3 stop and stirring machine is currently for sale and immediately available in our warehouse. Stop and mixer Rego SM3 -revised and repainted -for max. 30 liters -with automatic run via timer -manual run -stirring and beating

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Stop and mixer Rego SM2 used Rego SM2 stop and mixer reworked and repainted is currently for sale and immediately available in stock. - for max. 20 litres - with automatic run via timer - manual run - Stirring and beating - repainted - many parts renewed

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Rego stop and mixer Type: SM 3 30 liter boiler Stainless steel boiler with whisk Raising and lowering boilers mechanically easy cleaning due to smooth outer surfaces Weight of the machine approx. 280 kg Stable and Robust 220/380 V – 2 kW – 6,9/ 4 A  New ball bearings, new belts, new ball head, new electronics, repainted Dimensions: Height: 160 cm Width: 60 cm Depth: 70 cm

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Suction Nederman Jumbo Smoke Eater 501653 16 A 380 V Portable Suction 145 mm D Exhaust air 125 mm D

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...

SM 74 4P CP2000 129 mil Autoplate all wash units tecnotrans densitometer immediately free

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...

Professional and high-performance strapping machine from a renowned European manufacturer with internal frame dimensions of approx. 650 x 500 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated threading system as well as a reel quick-change system. -Strapping tension adjustable. -Soft tension possible. -Automatic belt insertion. -Strapping release on both sides via foot pedals. -Wear-free belt guides with quick-change system. machine can be moved and locked via castors. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine was checked or overhauled by a service technician. It can be demonstrated under electricity.

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

new spiral mixer Masz SMR 180 extendable, year of construction 2023, 120 kg dough, 2 clocks, stainless steel spiral, with 1 stainless steel kettle, if necessary with 1 additional kettle for an additional 3,800€, Fabr.-No. 121323, boiler diameter 75 cm, 6.8 kW, 50 Hz, 400 V, external dimensions 149 x 87 x 128 cm, weight: 549 or 726 kg

SMI TEC COSMOS 2000 Digital Servo Drive / Servodriv NEW Quantity: 2 pieces Price: 2500 per piece