sm 74 heidelberg used for sale

Flat cutter knife head with inserts, used   Type: FEPN 315-22 Manufacturer/make: Smalcalda Diameter: 315 mm Through hole: 50 mm with SK 50 Insert places: 14

Flat cutter knife head with inserts, used   Type: FEPN 400-22 Manufacturer/make: Smalcalda Diameter: 400 mm Through hole: 50 mm with SK 50 Insert places: 16

4 col gearless flexoprinting machine to print foil and paper with waterbased color or UV color. The Machine can be further used to coat foil or paper. Working width 1.4 m Diameter Mono un - and rewinder = 1000 mm Speed = 350 m/min.

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 20 mm 1 x impact bolt for round head 22 mm 1 x impact bolt for round head 25 mm Description M22 Weight Weight 9.2 Length mm Length mm 475 Risense size Risense size M22 Cill diameter mm rinie size 22 Impact energy Hz. Impact energy Hz. 20 Air Consumption L / sec. Air Consumption L / sec. 20 Stroke frequency J. J. Stroke frequency J. J. 35 Working pressure Mpa working pressure Mpa 0.63 Inner tube diameter mm inner diameter mm hose 16

swing diameter: 125 mm centre height: 400 mm weight of the machine ca.: 150 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

For sale: Air control valve 14 connections per block Order number: 3102.1 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1600 kN Total stroke: 300 mm Execution: 4 columns Table surface: Length: 1000 mm Width: 850 mm Return power: 119 kN Depth of throat Passage between columns: longitudinal: 645 mm Lateral: 405 mm Slide clamping surface: Width: 1000 mm depth: 850 mm Close traverse speeds: Rapid traverse: 400 mm/s Press stroke: 10 - 60 mm/s Return traverse speeds: 400 mm/s Oil quantity: 350 l Voltage 50 Hz 3x: 380 Volt Motor power: 45 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 2100 mm Width: 1200 mm Height: 3900 mm Various accessories: Security/savety device: SICK Roll-feed Useful cylinder length: 250 mm Decoiler: Manufacturer: DREHER 2380DM 400 mm Straithening device: DREHER 400 x 4 mm

Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

CNC control: FANUC 0i-TF+ with 15" LCD color display and Manual Guide i -12-fold tool turret with BMT45 holders, 24-fold indexing -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the counter spindle -Parts catcher with parts conveyor belt inside -Automatic surveying arm -Transformer -CE conformity -English machine manuals -Main spindle: 3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle: 3-jaw power chuck Ø135 mm (5") for spindle head standard: Flat-110; Make: SAMCHU ...

CNC control: FANUC 0i-TF+ with 10.4"/15" LCD color display and Manual Guide i -12-fold tool turret with BMT65 mounts -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the main spindle -Parts catcher with collection box -Automatic surveying arm -Transformer -CE conformity -English machine manuals -3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle 8": 3-jaw power chuck Ø170 mm (6") for spindle head standard: A2-5; Make: SAMCHULLY, incl. 1 set of soft and 1 set of hard  ...

turning diameter: 720 mm turning length: 2250 mm control: CNCN 300 turning diameter over bed slide: 480 mm 3-jaw-chuck diameter: 650 mm total power requirement: 44 kW weight of the machine ca.: t dimensions of the machine ca.: m Voltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Wagner (SMS MEER) Type: SP 1ZO 1000 YOM: Revamped 2006 and 2019 REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements Supply and machining of 4 guiding columns • Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned • Central threads and external thread • The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained aer retouching on the lower windchest and the upper yoke. Refurbishment of the lower bedstead: • Cast steel • Weight of 10,600 Kg and dimensions of 3500 x 3174 • 1050 Mounng on boring machine with balancing and geometric and dimensional checks • Retouching of the 4 lines of bores with 0330/332 (Rework of a maximum of 1mm/rays) • Dressage of inferiors and superiors • Retouching of 2 sides with 0340H7 and Ø330H7 (mini) • Retouchin ...

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Compact and fast strapping machine with maximum package dimensions of approx. width 600 x height 600 mm from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Closure type: Welding using the hot wedge method. -Up to approx. 48 straps per minute. -Tape type: PP tape. -Bandwidth 5-9 mm adjustable: Set to 5 mm. -Belt tension adjustable on the operating terminal. -Soft tension possible. -Standby function/power saving mode. -Stable foot pedal. -Low-maintenance and low-wear belt frame. -Sliding and lockable via castors. The machine can be demonstrated under electricity.

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 195 mm -interchangeable jaws -Weight: 12 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA, Sunny Boy Photovoltaic Inverter -Type: SB 5000TL-20 -PAC nom: 4,6/5 kW -Dimensions: 480/470/185 mm -Weight: 25 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: SUNNY MINI CENTRAL photovoltaic inverter -PAC nom: 8000 W -Dimensions: 610/480/H250 mm -Weight: 21 kg

Smec SL 2000M CNC Lathe with c axis Machine is like new condition Machine has been used only 4 months Fanuc control unit

Manufacturer SMT-Pullmax Kumla Model PV 7 H Year 1982 Working length : 3000 mm Max. thickness : 25 mm

Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA Schüco, Sunny Boy Photovoltaic Inverter -Type: SB 3300 -PAC nom: 3300 W -Dimensions: 440/360/240 mm -Weight: 42 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA, Sunny Boy Photovoltaic Inverter -Type: SB 3300TL HC -PAC nom: 3000W -Dimensions: 470/205/H495 mm -Weight: 26.7 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: Sunny Boy photovoltaic inverter -Inverter: not yet used -PAC nom: 3000 W -Dimensions: 480/470/H170 mm -Weight: 21.8 kg

Smipack Fp560 shrink-wrapper a Year 2002 Ask us for more information

Smipack FP560A welder Manual L welder Year of 2016

We sell complete set of Smipack machines shrink tunnel T452, wrapper FP6000CS and conveyor GH2000/400. Machines are like new with just 37 574 pcs of packages. Web INFO http://www.smipack.it/products/4/1019/semi-automatic-and-automatic-l-s ealers-with-shrink-tunnel

The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Max. length of bent material: 2050mm Max. strength of bent material: 4mm 7.5 - 2.2KW Weight: 4050kg By prior arrangement, the possibility of a tour in progress.

This SMEC SL2000 Lathe was manufactured in the year 2022. It is equipped with a SIEMENS SINUMERIK 828D control unit and has 6 axis. The machine has a spindle speed of 6000 rpm.

This SMEC PL 2000Y Lathe was made in 2014 in Korea and has 14309 production hours, of which 4261 are spindle hours. It is equipped with a Fanuc Series Oi-TD control unit. The machine has a spindle speed of 4000 rpm.

This SMERAL LKT 250D Stamping machine was manufactured in the year 2019 in Czech Republic. It is equipped with a MINI control unit.

SMEC-SL2500LY Tower - 4 Axes BMT-65 turret for 25mm square tools and Ø50 boring bar tools turning at 5000 rpm - 5.5 kW 10 bar coolant Siemens 828D control - with Manual Guide i Hydraulic chuck 2 axial rotary tool holders 2 radial rotary tool holders Motorized tailstock Automatic tool feeler

SMTCL İ5M4 CNC Vertical Machining Center 3 axis X : 1000 mm Y : 610 mm Z : 650 mm Spindle speed : 10 000 rpm Machine is in excellent condition