137,215 used machines on RESALE, but how to find them? Machine Search
MBO T 530-2 2nd Folding Unit; Condition as is; Working width 530mm; 4 fold pockets; Knife shaft. Folding machine MBO T530-2 secound unit; condition as is; working width 530mm; four pockets; knife roller.
Clamping force: 500kN, heating power: 4.2kW, connected load: 19.2kW, weight: 2.2t, an on-site inspection is possible.
Rated current: 117A, connected load: 68kW, an on-site inspection is possible.
Key data: 650 mm, 5000 mm, 390 mm
TOS SUS 63/5000 heavy-duty center lathe Czech manufacturer TOS. Capacities & Workpiece Dimensions • Distance Between Centers: 5000 mm • Max. Swing Over Bed: 650 mm • Max. Turning Diameter: 630 mm • Swing Over Cross-Slide: 390 mm • Max. Workpiece Weight Capacity: Up to 6000 kg (at lower speeds) • Unhardened Bed Dimensions: 580 mm x 819 mm Headstock & Spindle Specifications • Spindle Bore (passage): 80 mm • Spindle Taper: Metric 100 taper • Spindle Center: No. 5 Morse center • Number of Spindle Speeds: 22 standard speeds • Spindle Speed Range: 9 to 1120 RPM • Spindle Drive Motor Power: 18 kW (approx. 24 HP) feeds, threading & tailstock • Longitudinal Feed Range: 0.049 to 3 mm/rev • Cross Feed Range: Half of the longitudinal feed speed rate • Rapid Traverse: Equipped with directional motorized rapid travels on the carriage ...
Leopard 1 engine MTU Mercedes Model: MB 838 Ca-500 Power: 830 hp 10-cylinder multi-fuel engine with approx. 38 litres displacement Speed: 2200 Weight dry: 1930 kg Bore stroke mm: 165/175 Displacement/cylinder: 3.74 l Cylinder displacement: 10 V / 37.4 l
Transnorm belt conveyor 800-600-500 RA2041 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 545 mm Motor type: SEW motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,02 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: Supports Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...
Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,100 mm Number of fields per row of shelves: 01 pcs. Number of grating shelves: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: sendzimir galvanised Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates, cover caps and Schottsteg The stands are pre-assembled 2,000 mm high 535 mm deep 05x Grating floor, new Material colour: sendzimir galvanised Total width: approx. 1,000 mm Total depth: approx. 500 mm Frame profile size: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Beams (03 pieces): 450 x 18 mm Weight|pcs.: approx. 3.88 kg Max. load per floor 200 kg, with the same weight. Distributed load 04x Compensating plates, new Dimensions: 76 x 58 x 2 m ...
Type of Machine : Coolant System Model: HA 500 / 100 – AF Year of Manufacture: 2015 Flow rate: 500 l/min Medium: Cutting oil Work material: Aluminum Main voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power: 44.1 kW Current consumption: 81.4 A Empty weight: 1,350 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
Topper TMV-510 Built in 2008. Travel distances of X = 510 mm, Y = 360 mm, Z = 300 mm. Table surface 600 × 360 mm Controllers Fanuc 0i-MF
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
Built in 1999 electric scissor pallet truck Load capacity 1,000 kg Lifting height approx. 80 cm Delivery date: immediately Price on request. We supply and install worldwide.
Generator – ABB AMK 500L4A BATH Manufacturer: ABB Rated Power: 2,020 kW Voltage: 690 V Current: 1,522 A Frequency: 50 Hz Power Factor: 1.0 Speed: 1,680 rpm (max 2,450 rpm / 2 min) Protection Class: IP54 Insulation Class: F Weight: 5,010 kg Year: 2005
Height=2.23 m, Overall length= 3.38 m, Overall width= 1.6 m, Net weight= 235 kg,
Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)
Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 225 kg,
Height=1.62 m, Overall length= 2.56 m, Overall width= 0.8 m, Net weight= 235 kg,
Height=0.98 m, Overall length= 1.17 m, Overall width= 0.58 m, Net weight= 242 kg,
Height=1.4 m, Overall length= 1.88 m, Overall width= 0.81 m, Net weight= 230 kg,
Height=1.275 m, Overall length= 0.99 m, Overall width= 0.75 m, Net weight= 1000 kg,
Key data: 5500 , 80
Presse à injecter ENGEL 550 T Type ES1800 Année : 1998 E parfait état de fonctionnement
Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm
cutting diameter: 520 mm saw band length: 7239 mm cutting range square: 520 x 520 mm feed length: 500 mm feed length: 4500 mm cutting length min.: 6 mm : 10/100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm weight of the machine ca.: 4,2 t dimensions: 2300 x 3420 x 2385 m Control: MINIPOS 807 CNC control Minipos 807 Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 2005 electric scissor pallet truck Load capacity 1,000 kg Lifting height approx. 80 cm Delivery date: immediately Price on request. We supply and install worldwide.
A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.
Height=0.57 m, Overall length= 0.52 m, Overall width= 1 m, Net weight= 195 kg,
Key data: 1500 , 220 , 40
Presse à injecter ENGEL 150 T type ES 500/150HL Année de fabrication : 2001 En bon état de fonctionnement Force de fermeture : 1500 KN / 150 T Diamètre vis : 40 mm Volume injectable : 251 cm3 Pression d’injection : 1300 bars Rapport L/D. : 20 Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 700 mm Course de l’ejection. : 150 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 820 x 750 mm Dimensions : 5,45 x 1,60 x 2,40 m Poids : 13 000 kg
Ref. no.: 18591 Manufacturer: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this ...
CNC lathe Type: CTX 510 Ecoline Manufacturer: DMG Year: 2011 Control: Siemens Sinumerik 810D Max turning diameter: 465 mm Max swing over bed: 680 mm Max swing over support: 465 mm X: 300 mm Z: 1050 mm 315 mm 3-jaw hydraulic chuck Max spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% DC): 33/22 kW Max spindle torque (40%/100% DC): 33.5%: 630/420 Nm Maximum rotation speed of driven tools: 4000 rpm Programmable tailstock Tool probe Chip conveyor Suction Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions: 5250 x 2300 x 2000 mm Machine weight: 8000 kg In good condition, under power After repairing the linear line Accessories: Both external and internal tool holders Driven tool holders – direct and lateral Drill holders Hard jaws - 1 set Soft jaws - approx. 10 sets Find more here - .ucymachines/ Contact us at - sales@ucym ...
A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible.
EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg
Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers
The machine is in good technical condition, testing is possible by prior arrangement.
Manufacturer: Bottero Model: TRANSFER 500P Year of Manufacture: 2018 Voltage: 400 V Frequency: 50 Hz Rated Current (In): 3 A Mass: 1000 kg Minimum size : 140mm Max. size : 2000mm Thicknesses from 3mm – 19mm Titan 222L They have also ground 2mm glass several times. Find more here - .ucymachines/ Contact us at - sales@ucymachines
machine measurements: B/H/T 925 x 1.750 x 1.500 mm machine weight: 550 kg power capacity: -- kW Condition: used, very good condition Specification: Pad Printing Machine TPX 501 TFC E sealed Pot System - used only approx. 3 years in use consisting of: - Pad printing machine with closed ink system cliché size 450 x 220 x 0,7 mm equipped for 4-colour printing Print head with ceramic ring 96 mm incl. machine base (for a description see appendix) - printing capacity max.: 900 - 1.600 prints/hour - Drive TPX: pneumatic - Control: Microprocessor with EPROM - Tampon stroke: electronically infinitely variable programmable - Tampon vertical stroke: max. 160 mm - pad outreach: max. 149 mm - Weight with base: approx. 550 kg - Dimensions W/H/D: 925 x 1,750 x 1,500 mm - Displacement unit VR 1 Transfert Carreé E, conne ...
Properties: Volume 10500 L Material V2A (AISI 304) 1.4301 Vertical design Total height 5000 mm Diameter width 1800 mm Surface marbled on the outside Number of feet 4 Last Use Food Description: Tank topstock: Clapper bottom Crane eyelets Cylinder: Level indicator without scale in plastic Threaded nozzle DN 60 and disc valve DN 60 Manhole 300 x 400 mm Tasting tap Ladder hooks Tank underbody: Clapper bottom forward-drawn residual drain pipe with disc valve DN 60 4 feet
Mori Seiki SL250 b 500 High-performance CNC lathe with bar feed (Kupa 2 m) Collet chuck Passage 65 mm Year of construction 1998 Control Fanuc 16l Block Recording Switch-on hours approx. 88875 Spindle hours 19,000 Miscellaneous accessories:
used
GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...
used
GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...
A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.
This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details.
Röntgenwerk Bochum Generator Editor MP 501 with Control Panel Condition: used, removed from functional system (Pausch Uromat 3000) 50 kW • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are sold used and as is, unless ...
Rittal control cabinet TS 8806.500 Rittal standard enclosure TS 8806.500 Lighting PS 4155100 220x80x60 cm (HxWxD) Powder-coated Air conditioner Rittal SK 3304500 EAN: 4028177251038 You can find more control cabinets in other sizes - new and used - in our shop! International shipping costs on request!
Transnorm conveyor belt GF 1200-600-500 RA2424 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...
Siemens Micromaster 440 6SE6440-2UE37-5FA1 Frequency Inverter 75kW 90KW 6SE6440 MICROMASTER 440 WITHOUT FILTER 3AC500-600V +10/-10% 47-63HZ CONSTANT TORQUE 75 KW OVERLOAD 150% 60S, 200% 3S SQUARE MOMENT 90 KW 850 X 350 X 320 (H X W X D) IP20 PROTECTION AMBIENT TEMPERATURE -10+50GRD C WITHOUT AOP/BOP 440-2UE37-5FA1 Manufacturer's price:6290,-€ You can find more items - new and used - in our shop! International shipping costs on request!
This 3-axis Leadwell MV-50i was manufactured in 2003. It features an X-axis travel of 1,267 mm, Y-axis travel of 632 mm, and Z-axis travel of 498 mm. The machine includes a table size of 1,417 × 607 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the Leadwell MV-50i vertical machining centre we have for sale. Contact us for further details.
This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details.
Cramer LS 5000 Leaf Vacuum Manufacturer: Cramer Model: LS 5000 Model year: ZIXMM Type: Leaf Vacuum / Leaf Blower Vacuum Weight: 70 kg Speed: 3600 rpm Use: Pick-up and shredding of leaves and light garden waste Features: robust used device with high air flow, mobile and suitable for commercial use Location: Bremen
From a current recycling we offer you a Holmer implement carrier + slurry technology + beet bunker Terra Variant 585 plus attachments. Year of manufacture: Holmer implement carrier + Zunhammer slurry technology 2019, beet basket 2024 First registration: / Condition: used Hours: approx. 8,459 Asking price: 295.000,00 Euro VHB Original price: 425.000,00 Euro Equipment / accessories / other information: Property will be converted to slurry at short notice Terra Variant 585 (BJ 2019), Slurry technology Zunhammer 21 m³ & Vogesang (BJ 2019), Overload bunker RB 35 (BJ 2024) Asset Manager: Klaudius Giolbas Phone: 0202 257273151 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 24983 Handewitt The sale is without warranty Subject to prior sale
PowerPak 560 packaging machine for soft and hard film, fully equipped (cross-cutting, cross-cutter, longitudinal crushing knife, perforating device, and standard longitudinal cutting) features two movable labelers (top and bottom web) 510 mm wide x 590 mm long for pre-feeding 30 A 20 kW Triolabel printing device, Machine designation: GEA Powerpack 560, Construction year: 2017, Mains connection: 3/N/PE 400V 50/60 Hz, Circuit diagram number: ELTL170300
CNC punching machine manufactured in 2008. This TRUMPF TruPunch 5000 features a punching force of 220 kN and offers multifunction capabilities, including multi-shear, multi-bending, and thread-forming functions. It also incorporates deburring and rolling technology, along with a small-part sensor for programmable part guidance. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 5000 machine we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
