sm 74 5 used for sale

Clamping plate, welding table, welding table, straightening plate, construction table -Width: 1840 mm -Length: 5200 mm -Height: 850 mm -Sheet thickness: 28 mm -with supporting ribs -Weight: 2400 kg

High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km

Refurbished and Used Cylinder Heads

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

Carton sealer, packing machine -Carton width: max. 530 mm -Dimensions: 1250/760/H850 mm -Weight: 33 kg

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle for: workpiece clamping -Dimensions: 500/605/H815 mm -Wall thickness: 37 mm -Surface: milled -Long holes for workpiece clamping: mm -Number: 1x angle available -Price: per piece -Weight: 225 kg/piece

Mill Plus Control Built in 1998 24-fold tool changer Working area 500 x 380 x 380 mm Rapid traverses 10000 m/min Rapid traverse 30 m Direct displacement measuring system Tool holder SK40, ISO DIN 69871 max. spindle speed max. 15000 rpm (Kessler) Angle table 800 x 480 mm, load 500 kg Spindle concentricity 300/0.01 mm Weight 3500 kg Machine dimensions: 2.45 x 1.76 x 2.38 m Coolant Injection El. Handwheel The machine is in very good technical condition. Runs quietly and precisely.

Pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Westinghouse -Type: 521 295 180 0 -Piston rod: Ø 22 mm -Piston: Ø 80 mm -Stroke: 100 mm -Pressure: max. 10 bar -Quantity: 1 available -Weight: 7.2 kg

Sorfort available completely overhauled lubricating oil pump

impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Price: per piece -Number: 3 pieces -Dimensions: 94/94/H350 mm -Weight: 5 kg

impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shear beam load cell -Nominal load: 500 kg -Nominal value tolerance: %+/- 0.1 -Stainless steel: 1.4548 -Protection class: IP 68 -calibratable -Dimensions: 32/32/130 mm -Net weight: 0.98 kg

NNP 5000L Holding tanks 2004, stainless, 5000l capacity holding tanks, insulated, level detection, three in stock

Ryobi 522GX year 2007 50 mil autoplte all wash units 0.6 mm max paper ryobi matic dampening in very good condition immadiately free

PLC control, Siemens Simatic Net CP Profibus, communication processor -Type: 6GK7443-5DX03-0XE0 -Communication processor: for connecting Simatic S7-400 to Profibus -Dimensions: 290/210/H25 mm -Weight: 0.71 kg

Siemens Motor 1 FT 5102 0A C01-Z see nameplate

Immediately available refurbished shower holders, even used ones we have all in stock

Three-phase motor, electric motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 1x available -Dimensions: 235/142/H180 mm -Weight: 4 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 63 mm -piston rod: Ø 16 mm (connection M16 thread) -Total length: 230 mm -Total length extended: 280 mm -Number: 8 pieces available -Price: per piece -Weight: 0.85 kg/piece

Immediately available used swipe guide.

Immediately available used rocker arm block.

Transnorm conveyor belt GF 4700-600-500 RA2120 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...

Transnorm conveyor belt GF 2250-600-500 RA2056 Technical data: Conveyor length (NL): 2250 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of d ...

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 920 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 33 -Dimensions: 230/177/H138 mm -Weight: 7 kg

Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1330 rpm -Shaft: Ø 9 mm -Design: B3 -Protection class: IP 44 -Dimensions: 190/147/H110 mm -Weight: 4 kg

Weight: +/- 1,1 tons Power: 15 kW Length mm: 6800 Width mm: 1300 Height mm: 2300 Working height: 400 Transport size L x W x H: 2,5 x 2,4 x 2,3 mtr Maximum speed: 4 m/min Min.-max. glass thickness: 2 - 12mm Min.-max glass size: 2 x 3 Number of brushes: 4 brushes Condition machine : Disassembled in working order Control type: Manually Electric. Connection: 32A 3P+N+PE Photos/film available: Photos and video available Remaining: Left to right / RVS

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 560 mm -long jaws -Cone: Ø 120 mm -Through hole: Ø 110 mm -Hole circle: Ø 170 mm -Weight: 94 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 2860 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 56 -Price: per piece -Number: 3x available -Dimensions: 285/160/H205 mm -Weight: 18.4 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54129/029/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Verdichter, Compressor, Copeland Scroll ZR 40 K3E-TFD-522 Displacement: 9.94m3/h 2900 Red/min. Power, Amp.7 Year: New Refrigerant 134a, and others

Immediately available used injection p. Drive

Immediately available used starting air distributors

Transnorm conveyor belt GF 10800-600-500 RA2177 Technical data: Conveyor length (NL): 10800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 10800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

Gear motor, electric motor, three-phase motor -Speed: 12.1 rpm -Power: 0.04 kW -Construction: B14 -Diameter shaft: 16 mm -Protection class: IP 44 -Dimensions: 310/110/H155 mm -Weight: 7.7 kg

Transnorm conveyor belt GF 19000-600-500 RA2170 Technical data: Conveyor length (NL): 19000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 19000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Euro ...

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: R14.5 mm -Square: 101 x 71 mm -Total length: 552 mm -Weight: 26 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm -Total height: 194 mm -Weight: 20 kg

Transnorm conveyor belt GF 2350-600-500 RA2191 Technical data: Conveyor length (NL): 2350 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2350 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0.67 scope of d ...

Transnorm Rising falling Incline belt conveyor GF 4900+4100-600-500 RA2193 Technical data: Conveyor length (NL): 9000 mm ( 4900 mm + 4100 mm ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 9000 ( 4900 + 4100 ) Nomin ...

Transnorm conveyor belt GF 800-600-500 RA2192 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1,0 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 1,0 scope of delive ...

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Radius: R8 -Thickness: 60/25 mm -Drawing with the pictures -Total length: 569 mm -Total height: 176 mm -Weight: 30 kg

Immediately available Elevated main start valve

Transnorm Rising falling Incline belt conveyor GF 6000+3800-700-600 RA2199 Technical data: Conveyor length (NL): 9800 mm ( 6000 mm + 3800 mm ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9800 ( 6000 + 3800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YE ...

Immediately available used camshaft

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/40 mm -Drawing with the pictures -Total length: 599 mm -Total height: 68 mm -Weight: 28 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Tool radius: 3 mm -Thickness: 25/6 mm -Total length: 572 mm -Overall height: 192 mm -Weight: 16 kg