sm 74 5 used for sale

Fully automatic stretch film packaging machine with scale & labeler Packing Plant / Wrapper + Labeler DIGI AW-5600 FX The AW-5600 FX is an automatic weighing, packaging and labeling system with high performance for ease of use and environmental friendliness. The packaging machine reduces the workload with easy and simplified operation. It protects film and label consumption through linerless labels in order to keep costs and environmental impact low. Goods such as cheese, meat or fruit and vegetables can be packaged easily and visually appealing. Technical data Wrapper DIGI AW-5600 FX 220-240V / 50-60 Hz / 1.8 kW suitable for Food-Tainer bowls Performance up to 17 packets/min Film width: 350 - 500 mm Year of construction: 2018 Total weight approx. 250 kg Digi marking system 3/6 kg, Min 20g, e=1/2g Calibrated until 31.12.2022 Function tested, ma ...

X-axis: 730 mm Y-axis: 730 mm Z-axis: 740 mm NC Idex Table, 1° Table size: 500 × 500 mm Maximum table load: 500 kg Rapid traverse (X/Y/Z): up to 60 m/min (60,000 mm/min) Feed range: 1–60,000 mm/min Spindle nose height above table: approx. 70–810 mm Speed range: 35 – 15 000 rpm Spindle holder: BT 40 Spindle motor power: 30 kW Maximum torque: 176 mm Kobtfbswuku Uo Tpmodn Standard Magazine: 4 ́80 Slots Tool diameter: up to 95 mm (150 mm with free adjacent spaces) Max. tool weight: 12 kg Total connection: approx. 79.1 kVA Weight: approx. 11 350 kg Dimensions (L × W × H): approx. 4,650 mm × 2,600 mm × 3,000 mm

Clever titulator with steam tunnel. 2 pieces available Year of construction 2004 and 2005 Type: GS 501 Capacity: 11,000 fl./h > 18,000 fl./h

Key Features & Specifications of Nissan Muffler (550x170x150mm) ✔️ Product Overview: The Nissan Muffler is an essential component of the exhaust system, designed to reduce noise, improve engine efficiency, and manage emissions. It ensures optimal vehicle performance by directing and filtering exhaust gases. ✔️ Key Specifications: Type: Exhaust Muffler / Silencer Compatible Vehicle: Nissan (specific model compatibility may vary) Dimensions: 550mm (Length) × 170mm (Width) × 150mm (Height) Material: Stainless Steel / Aluminized Steel (depends on variant) Weight: Approx. 4-6 kg (varies by design) Inlet/Outlet Diameter: Standard sizes, typically between 40-70mm (check model-specific details) Function: Reduces exhaust noise, directs emissions, and enhances engine efficiency Durability: Rust-resistant and corrosion-resistant for extended lifespan Installation: Direct-fit ...

GALACTIC GAVA 500 CAPVD PVD sputtering machine was built in 2022 in Poland. This extremely technically advanced system is designed to coat, among others, cutting tools, moulds and punches with super-durable coatings with high resistance to abrasion and chemical agents. The CAPVD (Cathodic Arc Physical Vapour Deposition) method used, compared to standard PVD methods, allows highly dense and adherent coatings to be produced with good deposition rates and thicknesses (± 5 nm). In the process, atoms from a source (cathode) placed in the working chamber are vaporised using an electric arc. These atoms then transfer and deposit onto the surface of the workpieces, creating a thin coating. The GAVA 500 PVD sputtering machine is equipped with all the necessary components of the best technical specifications and meets the highest industry standards. Technical specifications of the GALACTIC  ...

FIS stirred tank 500 liters Manufacturer unknown, boiler is double-walled and can be heated, in a good used and functional condition. The device runs on 400 volts, completely stainless steel, workshop tested, immediately ready for use, Dimensions W/D/H 130/9100170 cm more on request.

roll diameter: 550 mm roll length: 1500 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 90 kW Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, f ...

The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg

roll diameter: 500 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 110 kW Condition: used, overhauled Specification: rolling mill 500 x 1500 mm - used - roll diameter: 500 mm - roll length: 1500 mm - monoblock - motor under the rolls - fixed friction between the rolls - Rolls: with core bore, with central chamber for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable material guide jaws made of steel - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - New safety brake for NOT STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety rods bi-directional - New electrical control cabinet with PLC system S7-1200 - New fr ...

Machine Details Warehouse number 1105-03722 Machine type Deep hole drilling machine Make IXION Type TL 500 SVA Year of construction 1985 Control type CNC Control CNC Bosch Alpha Storage location HAGUENAU Country of origin GERMANY Delivery time immediately Freight base from stock Technical details Core drilling diameter - max. 1.5 - 18 mm Drilling depth 600 mm Clamping table, rigid 700 x 1,350 mm Clamping surface of the rotary table 1,000 x 500 mm Longitudinal movement of the table 600 mm Table displacement in drilling direction 400 mm Table rotatable 180 ° Vertical adjustment of the drill carriage 250 mm Drilling unit swivel +/- 15 ° Spindle cone MK 3 Number of speeds 8 Speed range 240 - 2,400 rpm Control CNC Bosch Alpha Motor power 1.0 / 1.6 kW Total power requirement 10 kVA Machine weight approx. 1.35 t Space requirement approx. 2.0 x 1.5 x 1.8 m Infor ...

Available in stock 2 x Used Capstone User Connection Boards. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

The machine is manufactured on request. Can be produced in a length of 5500mm and 5/6 sawing units. Suitable for manufacturers of wooden pallets and small blanks. Motor power 3kW.

Available in stock 1 x Used Capstone ECM Control Board (P/N 512300-030). Most commonly used for Microturbines C60. Please note that this is an used and damaged board, buy it only if you wish to use it for parts or to refurbish. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)

Cole Parmer Vacuum Furnace Cole Parmer's vacuum furnaces are designed for drying under carefully controlled conditions – normal atmosphere, vacuum to 30" Hg or inert gas atmosphere. The oven enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm More items - new and used - can be found in our shop! International shipping costs on request!

Available in stock 1 x NEVER USED Capstone Igniter (P/N 516853-001). The equipment was NEVER USED and it is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

SPECIFICATIONS: Length of work table mm: 2700 Width of work table mm: 500

The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the  ...

The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...

; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

; Gross weight [kg]: 5071; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3 Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No.: 22004 ...

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Oil mist separator, extraction system, oil mist extraction, suction Brand ANAG Dimensions: wxlxh 55x68x50cm 230V, 50 Hz Quantity: 2 The price is net and is valid for 1 piece.

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of construction: 1990 Machine no.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outdoor clearing Pulling force: 25.000kg Cutting speed: 7.2 / 8.1 / 9.6m/min Maximum tool length: 3520mm Passage width: 520mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12.300 x 6.400 x 4650mm Power Supply: 380V 50Hz/110kW Accessories/ Special equipment: - 6 tool carriers for tool change - Machine documentation Remark / General The machines are in good condition. The machines are dismantled with us in the Bearing. The total volume of the plant comprises several trucks (approx. 70 tons per machine). The machines have produced connecting rods for passenger car diesel engines. Chain scrapers are designed for use in mass production. The continuous ( ...

Dear Ladies and Gentlemen, We hereby offer the following original and newly packaged AXIMAX Blue Fan. aximax axial fan NW500 Type: AXK 500-6BD2-20°-3 with attached three-phase motor IE3 3 kW; 3000 min-1; 400V 50Hz with PTC for FU operation with protective grille between impeller + motor New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER

; Gross weight [kg]: 5395; Engine: Perkins 2506C-E1STAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

Available in stock 1 x Used Capstone Digital Power Controller (DPC Board). The unit is complete. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

2,500 liter storage tank made of V2A Properties: Volume 2500 L Material V2A (AISI 304) 1.4301 Total height 3000 mm Cylinder height 2000 mm Diameter 1350 mm Number of feet 3 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: Cone base 2 crane eyes CIP ball in the middle Threaded Sockets Sensor for level measurement Tank cylinder: Manhole 440 x 340 Sensor for level measurement CIP ball over manhole 2 x Threaded Socket DN 50 Filler neck DN 80 Subsoil: Cone base Sensor for level measurement forward-drawn residual drain pipe with disc valve DN 100 3 trumpet feet with domes, height adjustable with washers

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories

The ASCO CB 5000 conveyor belt is a reliable solution for transporting bulk materials like soil, gravel, sand, or compost over medium distances. With its 5-meter length, this conveyor belt is designed to handle daily use on construction sites, in recycling centers, or at composting facilities. Its sturdy construction and modular system make it easy to expand and adapt to changing project requirements, ensuring it stays efficient for years to come. Adjustable conveyor angle and belt tension allow the ASCO CB 5000 to handle different materials and working conditions with ease. The operating hours counter helps plan maintenance, keeping downtime to a minimum. Quick assembly and disassembly make it a practical choice for sites that need frequent relocation. Whether used with screening plants or on its own, the ASCO CB 5000 delivers consistent, safe, and efficient material flow. Its robust ...

3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.

Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 18,510 mm Number of fields / row of shelves: 05 pcs á 3,600 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Pallet spaces per row of racks: 60 pcs. Total pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 500 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm d ...

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

85 ton x 2700mm 5 Axis back gauge Laser guards With Tooling

Basket to keep the glove

2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...

Booster pump, CR8-140 A-F-A-AUUV, 9,5m³/h, 120m, Grundfos, used Top Used Top! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer. The pump is in top condition. Electric motor Function guarantee! For parts from second hand we can not take over conventional guarantee and warranty. But we give you a function guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

We sell 39 x Lenovo Thinkpad X13 and Dell Latitude 5330 brand new! -German keyboards -Original boxes. -Notebooks are from 10/22 and 04/23. We will sell to the higest biddder early next week. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at  ...

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.