sm 74 5 used for sale

PRESS FORCES   total force (nominal): 1000 to PRESS TABLE   table surface (left-right): 1800 mm   table surface (front-back): 1300 mm SLIDE   stroke: 500 mm

CONTROLS   conventional PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1000 mm   table surface (front-back): 850 mm SLIDE   stroke: 705 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1205 mm Machine hours: 78571

🔧 GE-Elements 200 x 250 cm †flexible, versatile, and ready for their next job! Looking for a formwork solution that adapts to your project †while staying budget-friendly? Then take a closer look at our GE elements. 😉 Whether used as hand-set or large-area formwork , these elements provide a solid base for a wide range of applications. Thanks to the modular system , even individual or more complex layouts can be handled without overcomplicating things. 💡 The elements feature a robust flat steel frame and are compatible with all PASCHAL systems †perfect if you want to integrate them into your existing setup. 🔁   👉 Please note: These elements are used and show significant signs of wear . They are best suited for medium to low requirements or projects where functionality matters more than appearance.   With the universal con ...

Horizontal turning machine manufactured in 2007. This Pinacho Smart-turn6 260 features a distance between centers of 1,500 mm and a maximum turning diameter with soft jaws of 500 mm. It is equipped with a spindle speed of 2,400 rpm and a spindle bore of 80 mm. If you are looking to get high-quality turning capabilities, consider the Pinacho Smart-turn6 260 machine we have for sale. Contact us for further details.

An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible.

round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 950 mm workpiece width - max.: 1,0 - 50 mm sandingbelt width: 970 mm sandingbelt length: 1900 mm weight of the machine ca.: 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. The intuitive operation via touch panel allows every employee get to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consi ...

liter capacity: . l feed pressure: . bar coolant capacity: . l total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Electrostatic air filter The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mm swing diameter: 2000 mm turning height: 1600 mm Control: Siemens Sinumerik 805 turning speeds: 1-250 U/min Table load: 12000 kg main drive device: 56 Control system manufacturer Siemens type Sinumerik 805 Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulM ...

swing diameter: 125 mm centre height: 400 mm weight of the machine ca.: 150 kg dimensions of the machine ca.: m hydraulic steady rest width of arms 50 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): x mm bore capacity in steel (diameter): x mm throat: x mm throat: x mm bore stroke: x mm bore stroke: x mm POLYHEDRAL DRILLING MACHINE Drilling range: -Square: Spanner opening 3-27mm -Hexagon: Spanner opening 3-32mm Drilling depth: -Square -14mm -Hexagon-13mm Throath150mm Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Volume flow 1200 l/min Pressure dew point +3°C Pressure 7 bar Pressure loss 0.25 bar Voltage 230 V / 50Hz Power consumption 0.27 kW Air connection 3/4" a Refrigerant charge R134a Dimensions (DxWxH) 493x350x450 mm Weight 25 kg

Key data: 1400 mm, 1100 mm

For sale here is a new 160 mm pressure blasting cabinet from MHG. The plant was ordered in 2025 and installed in January 2026. New price 2025 approx. 19000,-€ with 12 weeks waiting time. Only 35 hours of operation. A few hours are added every day, the system is still in use. The installation site should be at least 210 cm deep. The blasting chamber is approx. 140 cm wide and 110 cm deep. The system was ordered with rubber cladding, turntable and LED lighting. Designed for use with corundum. You will receive an invoice with VAT on request. The price is net, plus 19% VAT. The facility is available immediately. With a 6 or 8 mm nozzle, the system can even be operated with a 7.5 Kw compressor + compressed air accumulator. Perfectly sufficient for blasting small parts. More pictures on request. Ideas and suggestions for the purchase process, gladly in a personal conversation. I am h ...

A nearly new Wheelabrator overhead monorail shot blasting machine is available. Rail overhang: 2338mm, rail width: 2980mm, working height: 880mm, work chamber height: 1600mm, max. workpiece diameter: 1200mm, max. workpiece weight: 400kg, exhaust air volume flow: 2500m³/h, exhaust air flange adjustment min./max.: -90°/90°, surface roughness range: 0.1µm-12.5µm, connected load: 22kW, component tolerances: ISO 2768-mK, welded construction tolerance: ISO 13920-AE. Machine dimensions X/Y/Z: approx. 4250mm/3250mm/4850mm, weight: approx. 5750kg, shot blasting hours: 58h, operating hours: 190h. Documentation available. An on-site inspection is possible.

Key data: 160 t, 1000 mm, 600 mm

STROKE 500 mm TABLE AREA 1000x850 DISTANCE BETWEEN COLUMN 1010mm DAYLIGHT 350 mm Approx speed 400 mm/s Motor: 40 kw

CONTROLS   conventional PRESS FORCES   total force (nominal): 800 to Safety distance 141 mm, maximum overrun 39 mm, rapid lowering speed 400 mm/s

Two-axis solar system Victron storage tank 4.6 KWh Very good technical condition Weight : approx. 1t Layout height 2.67m ! Price is subject to 19% VAT. Pick-up available Crane loading required ! Viewing possible by telephone arrangement Videos on our site

two-axis guided solar system Power 2.31 KWp with charging socket for e-car type 2 220v socket for pedelecs Very good technical condition Price is subject to 19% VAT. Pick-up available Crane loading required ! Weight approx. 750 kg System height 2.67 ! Viewing possible by telephone arrangement Year of construction 2016 / 2019 Color: Yellow

Used Used SMI adhesive labeller: Year: 2015 Condition: As Is Model: AVILA ROTEX 4T. S3. E3 Year: 2015 Speed: 2,800 bph Rotary labelling machine Direction of rotation: clockwise 4 platforms with electronic cam 3 adhesive stations Applicable label types: - Front label - Back label - Wrap-around neck label Centering systems: - Mechanical centering using notch on the bottom - Electronic centering with photocells for notch alignment on sparkling wine capsule Thermal transfer printer on the back label station Safety protection Code: EA 704 More details: https://bottlingscout.com

Manufacturer: SMT Year of Manufacture: 2005 Model: SMT 1.7 TC Type of Machine: PCB Selective Soldering Machine Current: 42 A Power Consumption: 27 kW Power Supply: 3-N, PE, 230/400V, 50Hz Included Items: Some wear parts included. Service History: Serviced annually until 2025. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle prod ...

Technical Specifications & Performance DataThe SMI TF350 is a tray packaging machine designed for the secondary packaging of PET bottles. Built in 2009, this industrial packaging machine forms bottle packs into trays for efficient handling, transport, and distribution within a used bottling line. It provides a practical solution for beverage production facilities requiring dependable end-of-line packaging equipment.Manufacturer: SMIModel: TF350Year of manufacture: 2009Production capacity: 45-50 packs/minContainer handling: PET bottlesAdvanced Automation & Control SystemsThis tray packer is intended for automated packaging operations, supporting the organized grouping of PET bottles into tray configurations. Machines of this type are integrated with synchronized product infeed and discharge systems to maintain consistent pack flow through the secondary packaging stage. The TF350 can suppo ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 156920 € : 2965.79 € : 1200 mm : 850 mm : 1200 x 500 mm : 1200 mm : 1200 500 mm : 5 - 30 m/min : 0 - 5000 mm/min : 0,001 mm : 560 mm : 0 - 2000 mm/min : 0.001 mm : 500 - 2200 1/min : 11 kW : 3.7 kW : 3.1 kW : 2.4 kW : 4600 mm : 2950 mm : 2745 mm : 4610 x 2290 x 2500 mm : 6400 kg : 900 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, checkout 7) Air purge spindle Longitudinal guides with double V  ...

turning diameter: 720 mm turning length: 2250 mm control: CNCN 300 turning diameter over bed slide: 480 mm 3-jaw-chuck diameter: 650 mm total power requirement: 44 kW weight of the machine ca.: t dimensions of the machine ca.: m Voltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Smoking Chamber Trolley

SMIpack FP870A L sealer and shrink tunnel Sealing bar 870mm x 530mm, conveyor feeds in to the shrink tunnel, shrink tunnel aperture 650mm W x 300mm H, adjustable temp and speed controls, with manuals, mobile, 1Ph and 3Ph

pressure: 63 t distance between columns: 680 mm stroke: 150 mm total power requirement: 15 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Drive: 15 kW pressing force 630 kN, retraction force 51 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26 t punching cross-cut in cmm: 80 x 2,5 stroke: - mm total power requirement: 1,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,5 m No. 1096: Revolver hole punch 26 to. EDEL, type SMO 26/660/12 built 1973 with throat depth 660 mm Working area: diam. 80 x 2.5 mm Drive power: 1.5 kW Accessories: 12-station tool magazine Various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: ? kg table height: - mm weight of the machine ca.: 560 kg dimensions of the machine ca.: 111 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1500 mm turning diameter: 420 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 250 mm spindle taper: DIN 55029 D 1-6 taper in tailstock: 4 MK quill travel: 140 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1400 kg range L-W-H: 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Sh ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 77000 € : 1455.3 € : 460 mm : 445 mm : 460 x 200 mm : 450 x 200 mm : 0,1 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 220 mm : 340 mm : 0 - 3000 mm/min : 0.001 mm : 1000 - 7000 1/min : 3 kW : 0.7 kW : 1.1 kW : 1.1 kW : 2510 mm : 2515 mm : 2010 mm : 1550 kg : 1015 mm : 175 kg : 210 kg : Dm. 205 x 12,7 x 31,75 mm : 0,004 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Tu ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 232970 € : 1700 mm : 850 mm : 1600 x 600 mm : 2x 800 x 600 mm : 0 - 20 m/min : 0 - 5000 mm/min : 0,001 mm : 685 mm : 0 - 2000 mm/min : 0.001 mm : 675 mm : 500 - 2200 1/min : 11 kW : 6165 mm : 3320 mm : 2850 mm : 5730x3200x3350 mm brutto mm : 9500 kg : 900 mm : 1335 kg : 1850 kg : 405 x 50 x 127 mm : 3,1 / 3,1 kW : 7.5 kW : X: 0,008, Y/Z: 0,005 mm : X: 0,006, Y/Z: 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitudin ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 84760 € : 1601.96 € : 460 mm : 395 mm : 460 x 200 mm : 450 x 200 mm : 0 - 20 m/min : 0 - 3000 mm/min : 0,001 mm : 220 mm : 290 mm : 0 - 3000 mm/min : 0.001 mm : 1000 - 7000 1/min : 3 kW : 2280 mm : 2205 mm : 2020 mm : 1500 kg : 1060 mm : 175 kg : 210 kg : Dm. 205 x 12,7 x 31,75 mm : 1,1 kW : 2.4 kW : 0,004 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turcite-B co ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 124560 € : 2354.18 € : 1015 mm : 600 mm : 1.000 x 400 mm : 1.000 x 400 mm : 1100 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 450 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 1.1 kW : 1.1 kW : 4450 mm : 2655 mm : 2080 mm : 4200 kg : 250 kg : 470 kg : 355 x 50 x 127 mm : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turci ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 247940 € : 2100 mm : 850 mm : 2000 x 600 mm : 2x 1000 x 600 mm : 0 - 20 m/min : 0 - 5000 mm/min : 0,001 mm : 685 mm : 0 - 2000 mm/min : 0.001 mm : 675 mm : 500 - 2200 1/min : 11 kW : 7710 mm : 3320 mm : 2850 mm : 6530x3200x3350 mm brutto mm : 10200 kg : 900 mm : 1240 kg : 2000 kg : 405 x 50 x 127 mm : 3,1 / 3,1 kW : 7.5 kW : X: 0,008, Y/Z: 0,005 mm : X: 0,006, Y/Z: 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitud ...

ELB SMART BD10 STC ist eine CNC-Flach/Profilschleifmaschine für hohe Präzision, Genauigkeit und Zuverlässigkeit. Kapazität: Tisch 1360×590 mm, X1100 Z670 Y400, Schleifmaß 1000×600 mm, Zuladung 1000 kg. Daten: Scheibe Ø400×100 mm (Bohrung127), 1450 U/min, Spindel 10 kW, Tisch 2–30 m/min, Vorschübe bis 2000/1500 mm/min, Eilgang Y 1 m/min, 3×400V, Gesamt 30 kW, Gewicht ~6900 kg, Abm. 3550×2410×2660 mm. Zubehör: Kühlung, Papierfilter, Ölnebelabsaugung, Magnetplatte 800×600, Abrichter, Profileinrollvorrichtung, Satz Scheiben/Flanschen, elektronisches Handrad. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizin, Uhren. Technische Daten ohne Gewähr

FINETECH SMV 1370 H3L ist ein 3-Achsen Bearbeitungszenter, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Tisch 1450×700 mm (5 T-Nuten, Abstand 100 mm, Breite 18 mm), Tragfähigkeit 1500 kg; Verfahrwege X1300 Y700 Z700 mm; Spindelnase-Tisch 130–830 mm; Magazin 30 Plätze. Stufenlose Drehzahl 0–12.000 min-¹, Eilgang 25 m/min, Spindelmotor 18,5 kW, Gesamtleistungsbedarf 45 kVA; Gewicht ~9000 kg; Abmessungen L4188×B2414×H2560 mm. Ausstattung: Kühlmitteleinrichtung 510 l, Kühlmittel durch Spindel 20 bar, Späneförderer, Spindelölkühler, Spindelkühlung, Zentralschmierung, Schaltschrank-Klima. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Maschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 300 to PRESS TABLE   table surface (left-right): 2200 mm   table surface (front-back): 1700 mm SLIDE   stroke: 1600 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1600 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6536 mm   space requirements -front/back-: 2923 mm   total height: 6135 mm   total weight approx.: 36000 kg

: neu : ca. 6 Monate ab Auftragse : Taiwan : 119920 € : 2266.49 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 0 - 20 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 3160 mm : 2450 mm : 2080 mm : 3400 x 2200 x 2530 mm : 4000 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 3.9 kW : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 109520 € : 2069.93 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 4020 mm : 2450 mm : 2080 mm : 3400 x 2220 x 2530 mm : 3700 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 0,005 mm : 0,005 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...

Max. format X/Y: 320mm/520mm. Thread guiding from front and rear thread spools via thread guide rods, thread tensioning device and thread break monitoring, rear platform height-adjustable by handwheel, adjustable lateral support knives, adjustable signature stops for head and foot side, foot-side stop spring-loaded, signature delivery wheels with DC drive, speed continuously adjustable via potentiometer, lower delivery wheel stationary, upper delivery wheel oscillating, signature transport via adjustable transport chain with plastic transport elements, book delivery height-adjustable, lateral knives at the book delivery adjustable. Documentation available. Inspection possible by arrangement.

Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: TF350 Year of manufacture: 2009 Machine type: tray packer for PET bottles Output: 45 - 50 packs/min Adhesive system: Nordson ProBlue 4 hot-melt unit Packaging material: flat cardboard blanks Guarding: full safety enc ...

Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Contrary to the pictures and videos, please note that the tray forming unit is no longer available. This unit has been removed and is no longer installed in the machine/line. Technical data Manufacturer: SMI (Italy) M ...

Labeller for disposable syringes Manufacturer: Bausch & Ströbel Type SME 6005 This machine allows the insertion of labels (self-adhesive labels), as well as piston rods into disposable syringes. Capacity 6000 syringes/h Volume of syringes 0.5 to 10 ml Diameter of syringes 7 to 17 mm Label dispenser LAETUS Control Camera

B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE

The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible.

SL55 Shrink Wrapping Machine – Year 2020, SaroPacker / Smipack SL55 Hood Shrink Wrapping Machine – 2020, For sale is a SaroPacker SL55 hood-type shrink wrapping machine, manufactured in 2020 by Smipack S.p.A., Italy., The SL55 combines sealing and shrinking in one operation and is suitable for professional packaging of a wide variety of products using shrink film., Technische Spezifikationen, - Brand: SaroPacker / Saropack, - Manufacturer: Smipack S.p.A., Italy, - Model: SL55, - Year of manufacture: 2020, - Machine type: Hood shrink wrapper / shrink wrapping machine, - Voltage: 220-240 V, - Power: 3.7 kW, - Current: 17 A, - Frequency: 50–60 Hz, - Sealing frame: approx. 560 × 430 mm, - Maximum product height: approx. 260 mm, - Serial number: 75759, - Made in Italy, -, The machine is suitable for packaging applications in production, logistics, e-commerce, warehousing and various ot ...