sm 74 4 used for sale

Stock# UG6391 Automatic machine for lipstick filling Manufacturer: Cosmatic Model: SM43 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2016.

SUMERA MOTOR SMG-100LG-S gas generator was built in 2018 in Poland by SUMERA MOTOR Sp. j. The machine, which is powered by natural gas, ensures uninterrupted operation of machinery and industrial systems in the event of power cuts or in conditions where electricity cannot be supplied. All components of the machine, including the 100 kVA motor, are located inside a soundproof enclosure that significantly reduces noise levels. The SMG 100LG-S generator weighs 1690 kg. Technical specifications of the SUMERA MOTOR SMG-100LG-S gas generator - fuel type: natural gas - rated power: 100 kVA (80 kW) - rated current: 144.6 A - rated voltage: 230/400 V - rated frequency: 50 Hz - rated power factor: 0.8 cosφ - performance level: G3 - degree of protection: IP 44 - maximum operating temperature: 40°C - weight of the SUMERA MOTOR machine: 1690 kg

SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006

SMAG C4R 350 June 1999 Spare parts supplied with the machine: 25 new and used air pressure connectors 5 new control buttons 1 box of 12 used relays 1 box of 12 new relays 4 new aluminum sensor holders plus 7 used ones 6 complete used Keyence for cell adjustment 2 new Keyence cell adjustment 11 bags of screws for adjustments and new cell 1 new INA mandrel holder bearing 4 new mandrel bearing holders 9 boxes of new cell wire 2 used wires 10 different new spare control buttons 7 new J559 belts 5 J864 belts 1 used inverter to be repaired 1 used brake system 1 used joystick Machine equipment: 12 slitting knives 9 slitting blade holders Winding shaft: Ø38-Ø40 -Ø76 Maximum mother reel diameter 650mm Maximum diameter of daughter coil: 350mm

Feluwa - Pump Condition: functional We can also offer general renovation on request. Spare parts are still available. If you have any questions, please contact us.

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004

Beading machine Prinzing Type SME 200/11 Year of construction 2006 Projection 1100mm Connected load 5,5KW sheet thickness 1.5mm VA Control Siemens Siematic OP7 Extras: -Parallel lining of the top roll with rolling bearing working shafts -infinitely variable motor for drive -motorized delivery of the harmonic, infinitely variable -Feed control for automatic with sensor control Sheet metal guide device in table design Total weight 6700kg The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø300 mm Table dimensions: 170 x 420 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 0.75 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø60 mm Weight: 27 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please  ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø400 mm Table dimensions: 225 x 550 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 1.5 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø80 mm with angle and parallel fence Weight: 55 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If y ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø600 mm Table dimensions: 320 x 830 mm Grinding wheel inclination: +/- 30° Motor power: 1.5 kW Speed: 940 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø100 mm Oyrkh with angle stop with engine brake Weight: 240 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not h ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with angle stop with engine brake Weight: 460 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questi ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 4x2000 SMO-2004-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° Eufzrzpm0 - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working len ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x2500 SMO-2506-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade cl ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x3200 SMO-3206-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm Eehs322 - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 14 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Total mass: 5200.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 8x3200 SMO-3208-N Hydraulic press brake Specifications - Maximum thickness mild stainless steel: up to 8.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 15 - Backgauge retract distance: 1000 mm - Motor power: 11.0 kW - Length: 4300 mm - Width: 2000 mm Bwydfs9 - Height: 2100 mm - Total mass: 6400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - B ...

Rego SM3 stop and stirring machine Stop and mixer Rego SM3 -for max. 30 liters -with automatic run via timer -manual run -stirring and beating

Rego stop and mixer Type: SM 4 40 litre boiler Stainless steel boilers with whisk Raising and lowering boilers mechanically Easy cleaning due to smooth outer surfaces Weight of the machine approx. 300 kg stable and robust 220/380 V – 2 kW – 6.9/ 4 A Dimensions: Height: 170 cm Width: 60 cm Depth: 70 cm

Rego SM4 Stroke Machine Stirring Machine for 40 Liters For sale is a Rego SM4 stirring and stirring machine, a robust and powerful device for bakers. The machine is ideal for whipping and stirring various creams and light doughs. Rego SM4 Stroke and Stirring Machine - Manufacturer: Rego Herlitzius - Model: SM4 - for mixing, kneading, beating and stirring a wide variety of masses (e.g. doughs, creams, shames, etc.) - for a maximum of 40 litres - Speed adjustable - 2 working functions, stirring or beating - Boiler lighting - With EMERGENCY stop button - incl. 2 whisks + 1 kettle Technical data and dimensions: - Connection 400V, 16A plug - Power: 1.6 kW - Dimensions: 720 x 680 x 1710 mm, WxDxH - Weight approx. 285 kg The machine can be visited and tested by appointment. More information and pictures as well as delivery on request.

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with engine brake with machine lamp with digital angle display Weight: 460 kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 10x3200 SMO-3210-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 10.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 12 - Backgauge retract distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm - Total mass: 8400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade  ...

turning diameter: 350 mm turning length: 532 mm control: Mazatrol Smart total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zube ...

Industrial polishing machines Hau and Metabo For sale are polishing machines from HAU and Metabo Metabo 7777 SL63-44 HAU HR4 10948 HAU SMP P850 See photos and installation plan plus accessories/spare parts (a.a. polishing paste feeder) together 4.5 - 5.3 tons. These have been standing unused since 2019 in 58-100 Świdnica in Lower Silesia in today's Poland. Until 2019, these were used in ongoing production in the Munich area and then brought to Poland to continue working with them there. However, the project in Poland was never implemented. Pricing: FOT 58-100 Świdnica, Poland, lashed to pallets. Viewing by arrangement. The photos are still from the original location in Munich. More photos on request

Dimensions (L/W/H): 2860x1140x1100 mm Weight: 1070 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . l feed pressure: . bar coolant capacity: . l total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Bundle Packing Machine Professional automatic packaging line from a renowned European manufacturer. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. The machine can be used in various industries, such as beverages, food, chemicals, wine and spirits, cosmetics, detergents, wood, textiles and graphics. It can pack various products such as glass and PET bottles, cans, cartons, trays, jars, cartons of various sizes. The film sealing machine has several monitoring sensors, light barriers or photocells to control the automatic process. User-friendly LCD control display with extensive functions and setting options such as automatic and set-up mode, 20 memory slots for different pack formats, piece counters, packaging performance calculation and communication functions. Technical data: -Maxi ...

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

sheet width: 2050 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 4 kW weight of the machine ca.: 1550 kg range L-W-H: 2,5 x 1,57 x 1,21 m Electric 380 Volt: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the rubber-covered blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and ...

Sling and agitator Rego SM3 A used Rego SM3 stop and stirring machine is currently for sale and immediately available in our warehouse. Stop and mixer Rego SM3 -revised and repainted -for max. 30 liters -with automatic run via timer -manual run -stirring and beating

Stop and mixer Rego SM2 used Rego SM2 stop and mixer reworked and repainted is currently for sale and immediately available in stock. - for max. 20 litres - with automatic run via timer - manual run - Stirring and beating - repainted - many parts renewed

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Rego stop and mixer Type: SM 3 30 liter boiler Stainless steel boiler with whisk Raising and lowering boilers mechanically easy cleaning due to smooth outer surfaces Weight of the machine approx. 280 kg Stable and Robust 220/380 V – 2 kW – 6,9/ 4 A  New ball bearings, new belts, new ball head, new electronics, repainted Dimensions: Height: 160 cm Width: 60 cm Depth: 70 cm

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Suction Nederman Jumbo Smoke Eater 501653 16 A 380 V Portable Suction 145 mm D Exhaust air 125 mm D

SPINNER TTC 300- 52 SMMCY CNC Lathe YOM 2012 Twin-opposed-spindle, twin-turret lathe Control FANUC 31iT Swing diameter 400 mm Max. turning dia ~200-250 mm Max. turning length 400 mm Travels: X1 180 mm, X2 110 mm, Z 450 mm, Y +40/-40 mm Rapid traverse: X1 15 m/min, X2 15 m/min, Z 24 m/min, Y 15 m/min With C-axis Main Spindle 1: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Spindle bore 52 mm Spindle speed 0-5000 rpm/ 19 kW Performance Pmax 23,5 kW Torque 150 Nm Spindle nose A6/DIN Sub-Spindle 2: Motor spindle with water cooling With hollow shaft measuring system for C-axis drive mounted directly on the spindle shaft Can be moved on a slide to take over spindle 1 Spindle speed 0-7000 rpm/ 8 kW Performance Pmax 13,8 kW Torque 189 Nm Spindle nose 100 mm Turret 1: At the top of the ...