131,218 used machines on RESALE, but how to find them? Machine Search
pulling force - max.: 16 t broaching length max.: 1250 mm table width: 400 mm broaching speed: 1...6,4 m/min return speed: 19,5 m/min tool length - max.: 1500 mm total power requirement: 42 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m - Specification: 2- jobs broaching right or left / right and left at the sametime The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1190 mm y-travel: 530 mm z-travel: 540 mm table-size: 1600 x 400 mm spindle drive: 11 kW tool taper: ISO 50 turning speeds: 28-1400 U/min feeds: 16-800 mm/U total power requirement: 21 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Alpine pin mill A 400 CW. Mining by the buyer is required. 2 x available
Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit
Hammer mill Voest Alpine Unirotor 490/190. 2 x available.
Used self-cleaning disc centrifuge made by Alfa Laval, type: MRPX 410 TGD 74. New 1988. Capacity: 7.500 liters/h. Technical data: - Function: milk separator, - Milk skimming capacity: 7.500 l/h, - Whey skimming capacity: 10.000 l/h, - Worm wheel shaft: 1420 - 1500, - Total installed power: 18.5 kW (1460 rpm), - RPM counter: 118-125, - Includes tools (wrenches), control, base, - Voltage: 380V / 50 Hz / 3 phases, - Stainless steel.
table length: 600 mm table width: 380 mm control: FANUC 16i-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4 OTIS elevators for sale – very well maintained, fully functional! We are selling 4 elevator systems from OTIS, built in 2011. The facilities are built over 8 floors, very well maintained and fully functional. The removal is carried out by the buyer. Details: • Manufacturer: OTIS • Year of manufacture: 2001 • Facilities over 8 floors • Very neat condition • Dismantling and collection on your own • Price per unit: 5.000 € Viewing possible by arrangement. Ideal for hotels, office buildings, apartment buildings or existing projects.
T-slot Table 3000 x 135 x 430 mm Thickness: 430 mm Length: 3000 mm Large: 1350 mm Weight: 5 ton With (1) -- Without (2) nuts: 7 t-slots
T-slot Table 3000 x 1350 x 430 mm Thickness: 430 mm Length: 3000 mm Large: 1350 mm Weight: 5 ton With (1) -- Without (2) nuts: 7 t-slots
BYSTRONIC Byspeed 4020 laser cutting machine was built in 2007 by the Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a maximum power of 4.4 kW, which is generated by a reliable laser source of the highest energy efficiency. In turn, the operator’s daily work is facilitated by an intelligent CNC control with many useful functions. All this makes the offered BYSTRONIC laser the perfect choice for any industrial plant. The last inspection of the machine was done in 2024. The Byspeed 4020 laser cutting machine weighs 19000 kg. Technical specifications of the BYSTRONIC Byspeed 4020 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - laser type: CO2 ...
Pressure plate punch Beil 780/425-S-H-AP2; cleaned and tested; die-cut 780 and 425 mm autoplate; Investment Contact. Plate punch hatchet 780/425-S-H-AP2; cleaned and checked; punch size 780 and 425mm Autoplate; contact for plate.
BYSTRONIC ByStar 4400 laser cutting machine was built in 2006 by the Swiss brand BYSTRONIC. The machine, designed for precision cutting and engraving of sheet metal, is an excellent choice for any industrial plant. The machining process is performed using a stable 4.4 kW laser beam, which is generated by a resonator of the highest energy efficiency. As a result, the edges of the machined workpieces stand out for their unprecedented smoothness and lack of unevenness. ByStar 4400 laser cutting machine is offered with a range of equipment, including among others an intelligent CNC control and a KELLER industrial dust collector. The machine has undergone regular inspections and is ready for further use. BYSTRONIC laser weighs 13500 kg. Technical specifications of the BYSTRONIC ByStar 4400 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - max ...
A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible.
new
pressure: 400 t distance between columns: 600 mm stroke: 600 mm table-size: 3000 x 1500 mm travel x / y: 2200 x 900 mm working feed: 7 mm/sec tank capacity: 66 l working pressure: 30-250 bar total power requirement: 18,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke cont ...
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
Technical data according to the nameplate: Manufacturer: EMK / Sondermeier Elektromotoren Handels GmbH Type: KHL1G315M-4B3E3KR Engine Number: 71500846002 Power: 132 kW Voltage: 400 V (delta Δ) Current consumption: 241 A Frequency: 50 Hz Speed: 1435 rpm Design: B3 (foot mounting) Degree of protection: IP55 Insulation class: F COS φ: 0.89 Date of manufacture: 08/2022 Place of manufacture: Rain / Germany
A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.
Logopak 410 IIIF Labeller Serial: LP10021552 Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,
Leroy Somer LSA 461 M3 - Used - 150 kVa - Generator End
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: BX 100|50|15 Agraffe: 5 HK Clear width: 1,450 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery can be queried from us
Dough divider RHEON, type: Twin DIvider 400 VX 202 -completely overhauled- Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Tested starting width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - The machine was dismantled into all its individual parts and wear parts were replaced - Condition: Perfect, like new - Warranty: 6 months Visits and test runs are possible by arrangement.
A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 102 x 50 mm Truss type: SLO 102|2 Agraffe: 5 HK Clear width: 1,450 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO 089 | 2 Agraffe: 5 HK Clear width: 1,445 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark
Leather splitting machine Camoga Cn 412 with 40cm working width
Commonrail pump As good as new with 400 hours
Fully automatic timber feed with feed roller conveyor Extension of the feed cross conveyor and feed roller conveyor for timber lengths up to 13 m Feed and feed cross conveyors Under-table swivel cross-cut saw Universal milling unit 4-axis (UF4) Combined support for vertical tools Drilling rig 2.2 kW Combined support for horizontally working tools Drilling rig 2.2 kW Longitudinal and transverse groove milling machine Rear marking device (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for timber conveying incl. extension (without drive) Component ejectors Wooden shelf 5-arm Safety devices and enclosures
Key data: 630 mm, 8 mm, 8 kW
Panhans 446-B Dressing-Thickness Planer Combi Machine Brand: Panhans Type: 446B Year of Make: 2005 Planing width dressing/thickness planer: 630mm Knife shaft: ø120 - Z-4 Speed: 5,000 rpm Engine: 7.5 kW Planing height: 4- 225 mm Table length dressers: 2,250 mm Table length thicknesses: 1,040 mm Extra Uitvoer taflelengte: 1.000 mm, automatische hoogte versetlling met tafelblad Chip removal: max. 8 mm Feed: 7 + 14 m/min. Weight: 1,300 KG Extraction ø160 mm Condition: Fully functional tested
Key data: 45 °, 3 mm, 2 mm
SCM SiI400N Sliding Table Saw Mark SCM Type SI400N M-No.: AB/127843, 071528 Built in 1999 Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3000-4000-5000 tpm. Cutting height 130 mm. (Saw blades. 400 mm.) Saw blade swivel 0 - 45° Scoring ø mm, ID: 20 mm Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Lay-down table: steel Lay-down table with licence for angle cuts Length stop anodized aluminum with 2 flaps Control panel Digitale-analoge zaaghoogte aflezing Condition Fully functional, very SCM maintained
Boku RS 40 E with 1 kettle, 1 broom Machine cleaned and tested.
Name: FANUC OM Series Servo Motor Manufacturer: FANUC (Japan) Type: M 472128 L × W × H: ~ 325 × 170 × 140 mm Weight: ~ 12.10 kg
turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working widths: 4600 mm Roller width: 4800 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 24 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely overhauled before delivery. We supply with guarantee. (Photo shows a similar machine after overhauling) • New drive can be designed according to case of operation, • extra charges: EUR 10,000.00 to 12,000.00 • Guarantee period: 6 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working widths: 4200 mm Roller width: 4400 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 22 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely new. We supply with guarantee. (Photo shows a similar machine after delivery) • New drive can be designed according to case of operation, • extra charges: EUR 22.000 • Guarantee period: 7 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dewarping machine, strip descaler Nock CB 435, with new blue feed belt (the photos still show the old one), Cutting width 430mm, with table for open use, instruction manual, Connection 400V, dimensions LxWxH approx. 90x80x117cm, weight approx. 200kg, year of construction 1998, the machine is in excellent condition, it has been used very little and runs very smoothly.
TECHNICAL DETAILS Travel X x Y: 4000 x 2000 mm Cutting range X x Y x Z: 4064 x 2032 x 70 mm Workpiece weight: 1270 kg Positioning speed per axis / simultaneous: 100 / 140 m/min Axis acceleration: 12 m/s² Position accuracy: ±0.1 mm Repeatability: ± 0.05 mm Edge Detection Accuracy: ± 0.5mm Table: Interchangeable table system Laser Source: Fiber 4000 Power: 4000 W Wavelength: 1μm Polarization: unpolarized Pulse Rate: 1 - 2500 Hz Sheet thickness steel: 20 mm Sheet thickness aluminium: 15 mm Sheet thickness stainless steel: 15 mm Sheet thickness copper: 8 mm Sheet thickness brass: 8 mm MACHINE DETAILS Dimensions: 12.9 x 6.75 x 2.5 m Weight: 15 t Power: 25 kW Switch-on time: 23,477 h Laser switch-on time: 5,248 h
Manufacturer: Bitzer Model: 2JES-07Y-40S Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 400V / 3Ph / 50Hz Shipping Weight: 50 kg Net Weight: 43 kg Compressor Details: • Type: Semi-Hermetic Piston Compressor • Series: CE1 • Number of Cylinders: 2 Ncebjwudyqemy Ex Ipou • Flow Volume: 5.21 m³/h • Compression Type: Piston • Oil Type: BSE32 (BSE55 for R134a, R450A, R513A, R1234yf if tc > 70°C) • Oil Charge: 1.0 L Electrical Data: • Starting Current (LRA): 14.8 A • Max Operating Current: 3.7 A • Max Power Consumption: 1.9 kW Refrigerant Compatibility: R134a, R450A, R513A, R1234yf, R404A/R507A, R448A/R449A, R454C, R455A, R407F Pipe Connections: • Suction Line: 16.0 mm (5/8") • Pressure Line: 12.0 mm (1/2") Sound Power Level: 63.0 dB(A) at +5°C / 50°C Dimensions: • Width: 220 mm • Height: ...
AZO rotary screener New engine Sold with 7 synthetic sieve handles 0.2mm 0.5mm 0.6mm 1.4mm 1.4mm 1.5mm 4.5mm, Elec: 400 V, Engine power: 1,5 kW, Entry Sieve: 250x250, Sieve diameter:: 175, Screen length: 340
4-meter honing machine, priced to sell, It can be inspected in our warehouse, Mimu machine tools (Italy)
Key data: 45 °, 3200 mm, 1250 mm
Griggio Unica 400 sliding table saw Mark: Griggio Type: Unica 400 Year of Make: 2010 M-No.: MC00101468 Main saw: ø400 mm, saw protrusion 125 mm, inclination 0-45° Saw blade height-, -bevel adjustment: electric with digital display Speed: Saw blade protruding: 0-125 mm electric with digital display Saw blade tilt: 0 - 45° electric with digital display Motor: 7.5 KW Vorrits saw: 0.75 KW, ø125 mm Trolley 3,200 mm Cutting width: 1,250 mm electrically with digital display on the width stop Length stop: 2,200 - 3,300 mm Lay-down table: steel with scale angle display, adjustable support support and product-friendly roller Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 820 KG
WATER RING HORIZONTAL PELLETIZER, Constructed in a stainless steel sturdy structure, 16.25 kw installed power, for PE PP production average 300-400 kg., steam extraction vent, water-water heat exchanging unit (to be connected to a chiller), N.1 die (customized to project), N.4 rotating knives, N.1 blade-holder, N.1 blade adjusting template, N.1 thermoregulated area, Heating power 6 kW, Cutting drive power 3 kW, No. 1 water pump for water re-circulation, ELECTRIC CABINET (OPTIONAL - can be connected to extruders cabinet), This machine is available in other sizes and in dry version., When submitting your enquiry, please give details of :, - MATERIAL type and size, - CAPACITY required, - if CABINET is needed or possible connection with existing extruder cabinet, installed power - used power in work: about 60-65% : 16.25, capacity: 300-400 kg/h
Offer 25228 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, hydr material replenishment machine - Saw blade dimensions 4400 x 34 x 0.9 mm - Cutting speed infinitely adjustable 15 - 88 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 360 mm - Square flat 360 x 430 mm - Hydr. Material Tension - Hydr Material Replenishment Machine - Coolant device - Drive 400 V / 3 kW - Space requirement approx. W 2200 x H 1850 x D 1300 mm - Weight approx. 1100 kg - Roller conveyor 2000 mm
Mazak VTC-41 L X: 1660 - Y: 410 - Z: 510 mm CNC X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Table dimensions: 2000 x 410 mm Max weight on the table: 800 kg Depth of throat (uprights-spindlecenter): 460 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 11/7,5/5,5 kW Drilling-capacity: max dia 25 mm Tapping-capacity: max M24 Control : Mazatrol Number of axes: 3 axes Toolchanger: yes Number of rotations: 7000 rpm Length: 3900 mm Depth: 3050 mm Height: 2700 mm Weight: 6 ton
Was used for sludge/water separation. In perfect working condition. Stainless steel drum and rotor. Sale without quarantee, as is where is.
Holke F-10-V X: 815 - Y: 400 - Z: 420 mm Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z´: 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Weight: 1300 kg
Pinacho SC 200 Ø 402 x 1000 mm Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg
kop kan draaien: 90° (R amp; L) / 45° (F amp; B) 360° bovenarm draaibaar spindelhartlijn tot kolomoppervlak: 71 gt; 476 mm Max longitudinal travel X-axe: 750 mm Max cross-travel Y-axe: 305 mm Max travel Z-axe: 406 mm Max height workpiece: 70 > 476 mm Power on spindle: 2 HP Admission in boring head (ISO): ISO 30 Spindlespeeds: 3750 rpm Length: 1435 mm Depth : 1600 mm Height: 2100 mm Weight: 1 ton
maximum number of results exceeded
please refine your search
